Data Loading...
Board Converting News, December 6, 2021
59 Downloads
6.56 MB
Twitter Facebook LinkedIn Copy link
RECOMMEND FLIP-BOOKS
BoardConverting Serving the North American Corrugated and Folding Carton Industries for 37 years December 6, 2021 VOL. 37, NO. 49
Great Northern, UW-Stout (WI) Partner On Sustainability Course BY ABBEY GOERS Eighteen months ago, University of Wisconsin-Stout and Great North- ern Corporation set out to create a collaborative experience that would strengthen its long-standing partnership and directly impact graphic design and interactive media and packaging students’ education.
Rusken Packaging Acquires Nelson Packaging In SC Cullman, Alabama based Rusken Packaging announced that it has acquired Nelson Pack- aging, headquartered in Cowpens, South Car- olina, approximately 20 miles east of Spartan- burg. The acquisition was effective November 2, 2021. Privately owned, Nelson Packaging has been operating since 1982, selling an array of corrugated manufacturing, corrugated pallets and inner packaging capabilities. Additional- ly, Nelson Packaging has obtained two U.S. patents for its trademarked corrugated Trans- porter Pallets®. The Nelson Packaging team takes pride in its ability to provide customized corrugated packaging solutions and pallets specific to their customers’ needs. “Nelson is an exciting acquisition not only because of its strategic location, but also because of its strong reputation as a market leader,” said Rusken Chief Operating Officer Randy Whiteaker. Nelson and Rusken’s combined growth in the Carolinas will be led by Rusken’s Kevin O’Brien and Tim Bell, working alongside the current management team at Nelson. “The Rusken team is thrilled to partner
With the support of Great Northern Corp. CEO John Davis, Chippe- wa Falls staff Kris Johnson and Sarah Murawski, along with UW-Stout faculty members Robert Meisner and Nagesh Shinde, conceptualized the Great Northern Corporation Collaboration Experience, a sponsored Along with the support of Great Northern Corp.’s John Davis and staff, Pro- fessor Nagesh Shinde, left, and Professor Robert Meisner of UW-Stout con- ceptualized the Great Northern Corporation Collaboration Experience.
CONTINUED ON PAGE 4
WHAT’S INSIDE ISM: Manufacturing, Economy Grow Again In November SupplyOne Acquires IC Industries In FL JB Machinery Cuts Ribbon On New Facility In Neenah 0 AICC Canada Celebrates Holidays With ‘Maskerade’ Party 6 x x 8 x x 12 x x 26 x x
course taken by students in the two disciplines. “UW-Stout is an ideal partner for Great Northern,” Davis said. “As a polytechnic univer- sity, UW-Stout is committed to an experiential learning environment. I can’t imagine a better learning environment in which to bring two disciplines together to simulate the real-world challenges of creative problem-solving.” Great Northern, which manufactures pack-
John Davis
aging and retail displays, has operations in ve states, with locations in Appleton, Chippewa Falls and Racine, Wisconsin. It employs more than 1,700 people nationwide, including 30 UW-Stout alumni. CONTINUED ON PAGE 24
Machinery and Handling for the Corrugated Board Industry
AVERAGE CONTAINERBOARD PRICES The average prices reported are tabulated from prices PAID by various sources throughout the United States the week previous to issue. Prices in some areas of the country may be higher or lower than the tabulated average. The prices tabulated here are intended only for purposes of reference. They do not connote any commitment to sell any material at the indicated average. Transactions may be completed at any time at a price agreed upon by seller and purchaser.
REGION E. Coast Midwest Southeast Southwest
42# Kraft liner
26# Semi-Chem. Medium
$1005.00-1010.00 $1020.00-1030.00 $1020.00-1030.00 $1020.00-1030.00 $1050.00-1060.00 $1023.00-1032.00
Short Ton Del. Short Ton Del. Short Ton Del. Short Ton Del. Short Ton Del. Short Ton Del.
$940.00-990.00 $955.00-975.00 $955.00-975.00 $955.00-975.00 $975.00-995.00 $958.00-978.00
West Coast U.S. Average
SHEET PRICES BY REGION (AVERAGE) Per 1MSF, local delivery included, 50MSF single item order, truckload delivery. Sheets
E. Coast Midwest South-SW S. CA N.CA/WA-OR US Aver.
200# 275#
$62.26
$72.05
$62.69 $82.80
$85.35 119.54
$73.13 101.29
97.32
99.89
90.86
113.65
OYSTER UP-CHARGE 8.34
8.34
8.34
8.34
8.34
8.34
275# DBL-WALL 350# DBL-WALL
107.46 118.45
114.69 129.32
116.54 137.25 117.82 145.56
141.08 148.46
122.76 131.80
P E R F O R M A N C E D E L I V E R E D • HEAVY, DENSE BALES • RELIABLE AUTOMATIC TIER • LOW OPERATING COST PER TON AMERICAN BALER TAKES PERFORMANCE TO NEW HEIGHTS! 800.843.7512 AmericanBaler.com I N T E G R I T Y I Q U A L I T Y I R E L I A B I L I T Y I VA L U E
CANADIAN SHEET PRICES (AVERAGE) In Canadian Dollars, per 1MSF, local delivery included, under 50MSF single item order, truckload delivery. 200# 275# Oyster UC 275#DW 350#DW $78.56 $99.18 $9.00 $96.32 $105.83 CANADIAN LINERBOARD & MEDIUM The average prices reported are tabulated from prices PAID by various sources throughout Canada. Prices may be higher or lower in various areas of the country. The prices tabulated here are intended only for purposes of reference. They do not connote any commitment to sell any material at the indicated average. Transactions may be completed at any time at a price agreed upon by seller and purchaser. Prices are Canadian $ and per metric ton.
42# Kraft Liner 26#
Semi-Chem Medium
East West
$970.00
$960.00 $995.00
$1,015.00
3
December 6, 2021
www.boardconvertingnews.com
Rusken Packaging Acquires (CONT’D FROM PAGE 1 )
Core Competency
with the Nelson Packaging organization that optimally aligns with our customer-centric approach and culture,” said O’Brien and Bell in a press release. “This acquisition is part of a strategic focus to expand Rusken’s footprint throughout the Southeast, further growing our existing ca- pabilities and customer base in North and South Carolina. Please join us in welcoming owner, Duane Nelson and the entire Nelson Packaging team to the Rusken family.” In other news, Rusken Packaging announced that Randy Whiteaker has been appointed the new Chief Operating Officer of the organiza- tion. Whiteaker will have the prima- ry responsibility of leading Rusken’s continued growth across all sites, while maintaining our customer-cen- tric approach to provide optimal corrugated packaging solutions for our partners. An experienced business leader, Whiteaker will suc- ceed Joey Jackson, who retired in September 2021, and will assume responsibilities in this expanded role going forward. With 14 facilities in seven Southeastern states, Rusken is a forward-looking regional organization that has experienced exponential growth over the last decade. Driven by an entrepreneurial spirit, Rusken continues to be committed to a truly remarkable customer experience. Randy Whiteaker
BloApCo Floor Shredders easily handle Cores and Sheet Waste
▲ All converting scrap handled by one BloApCo Shredder. ▲ Energy efficient. Low HP. Low RPM. Low noise. ▲ Industry leading 3-year warranty.
See the video at : BloApCo.com/horizontal-floor-shredder
www.bloapco.com 800.959.0880
© Blower Application Company, Inc., Germantown, WI 2020
4
www.boardconvertingnews.com
December 6, 2021
A Century of Innovation In Every Machine Celebrating 100 Years: 1920-2020
FALCON 2-minute run-to-run times and world-class production @ 21K/HR
IBIS 2-minute run-to-run times and total product flexibility @ 15K/HR
www.isowa.com U.S. Based Sales, Parts and Service from Our New Expanded Location! United States: 602-639-9060 Brazil:+55 (11) 3666-6522 Japan: +81-568-31-3102 A M E R I C A
ISM: Manufacturing, Economy Grow Again In November
“The Production Index registered 61.5 percent, an in- crease of 2.2 percentage points compared to the October reading of 59.3 percent. The Prices Index registered 82.4 percent, down 3.3 percentage points compared to the Oc- tober figure of 85.7 percent. The Backlog of Orders Index registered 61.9 percent, 1.7 percentage points lower than the October reading of 63.6 percent. “The Employment Index registered 53.3 percent, 1.3 percentage points higher compared to the October read- ing of 52 percent. The Supplier Deliveries Index registered 72.2 percent, down 3.4 percentage points from the Oc- tober figure of 75.6 percent. The Inventories Index regis- tered 56.8 percent, 0.2 percentage point lower than the October reading of 57 percent. The New Export Orders Index registered 54 percent, a decrease of 0.6 percentage point compared to the October reading of 54.6 percent. The Imports Index registered 52.6 percent, a 3.5-percent- age point increase from the October’s 49.1 percent.
Economic activity in the manufacturing sector grew in November, with the overall economy achieving an 18th consecutive month of growth, say the nation’s supply ex- ecutives in the latest Manufacturing ISM Report On Busi- ness. The report was issued last week by Timothy R. Fiore, CPSM, C.P.M., Chair of the Institute for Supply Manage- ment (ISM) Manufacturing Business Survey Committee: “The November Manufacturing PMI registered 61.1 per- cent, an increase of 0.3 percentage point from the October reading of 60.8 percent. This figure indicates expansion in the overall economy for the 18th month in a row after a contraction in April 2020. The New Orders Index regis- tered 61.5 percent, up 1.7 percentage points compared to the October reading of 59.8 percent.
“The U.S. manufacturing sector remains in a demand-driven, supply chain-constrained environment, with some indications of slight labor and supplier delivery improvement. All segments of the manufacturing economy are impacted by record-long raw materials and capital equipment lead times, contin- ued shortages of critical lowest-tier materi- als, high commodity prices and difficulties in transporting products. Coronavirus issues — worker absenteeism, short-term shutdowns, difficulties in filling open positions and over- seas supply chain problems — continue to limit manufacturing growth potential. “Panelists remain focused on the impor- tance of improving supply chain issues to respond to ongoing high levels of demand. Demand expanded, with the (1) New Orders Index growing, supported by continued ex- pansion of the New Export Orders Index, (2) Customers’ Inventories Index remaining at a very low level and (3) Backlog of Orders Index staying at a very high level. Consump- tion grew during the period, with a combined 3.5-percentage point increase to the Manu- facturing PMI calculation. “The Employment Index expanded for a third month, with some indications that the ability to hire is improving, partially offset by the challenges of turnover and backfilling. Inputs continued to constrain production expansion, but there are early signs of sup- plier performance improving. The Supplier Deliveries Index slowed again, while the Inventories Index expanded more slowly. In November, the Prices Index expanded for the 18th consecutive month, at a slower rate, indicating continued supplier pricing power and scarcity of supply chain goods.”
6
www.boardconvertingnews.com
December 6, 2021
40 ft of paper travel from preheater to hot plates 3 seconds of heat, glue and bonding 1 chance to get it right! the ZONE
Design & Production
Chicago Electric offers 10 technology solutions to control ‘the Zone’ CORRUGATOR Sectoral preheating plate
Our sectoral preheating plates provide direct heat by means of a double steam circuit, allowing for efficient heating in hard-to-access locations, as well as to act as a steam shower to open the paper’s fibre, making it receptive to absorbing the heat and the glue.
This translates into increased speed and improved quality of the cardboard sheet finish.
The system’s main advantages are as follows:
• The plate may only be used to heat, only to humidify, or both options at the same time. • The plate is sectored, which allows for applying humidity to the sections. • It provides temperature in previously inaccessible locations and near the location needed. • It compensates the loss of temperature dissipated due to distance, speed or limitations of the exiting preheaters. • Quick transferring of heat to the paper. • The combination of the hot plate and steam shower allows for providing heat even to the hardest papers to heat. • Does not dry out the paper. • Possibility of operating as a humidifier and pre-conditioner. • Maintains and improves the fibre’s elasticity. • Acts according to the operator’s needs. • Facilitates the paper’s hygroscopy to absorb the glue and improve rubberising.
CONTROLLABILITY
1. Wrap Arm - Position & Temperature 2. Preheater Direct Drive
DOUBLEBACKER IMPROVEMENT
3. Steam Plate 4. Contact Roll 5. Glue Machine Direct Drive Touch Productivity Issue—Glue Unit Many glue units run with a rider roll or a guiding bar system. The rider roll with paper gap allows a precise glue application, but requires frequent Contact Roll
PRODUCTIVITY
C/ Orfeó Català 13-15 · 08440 Cardedeu (Barcelona) telf: +34 93 846 01 06 · [email protected] WWW.AL-GAR.COM
DOUBLEBACKER IMPROVEMENT
calibrations and settings. Bar systems avoid this, but compensate this with the risk of exces- sive glue application. The system contains many wearing parts. Solution The contact roll combines the ad antage of both systems and ensures minimum contact between board and applicator roll. The system uses small pneumatic cylinders in order to achieve a “soft touch.”
6. Gap Control 7. Curved Plate 8. Roller Shoe Press When it comes to a short-term increas of web tension, spring loaded systems with shoes or airpressure activated system have problems in compensating these. The system is lifted for a short time. This may result in de-lamination and in the ‘double kiss’ effect. Solution For a defined and exact bonding point of the web fiv weight rollers will be installed usually over the first flat hotplate of the heating section. The rolls are mounted into a frame, which is actuated by means of two pneumatic cylinders. P oductivity Issu —Double Kiss Bonding
PRODUCTIVITY
PRODUCTIVITY
DOUBLEBACKER IMPROVEMENT
Roller Shoe
DOUBLEBACKER IMPROVEMENT
9. Thin Wall Hot Plates 10. Pressure System Benefits —Exact glue application due to defined contact of applicator roll to web. Web is in contact to less flute tips compared to bar systems. • High precision glue application • Less moisture applied to web —No wear of shoes and springs —No adjustment of shoes or paper gap —Uniform glue application over entire w orking width for all flutes by use of pneumatic cylinders instead of springs — Less contamination by paper dust and glue remains —No jam of board because of web breaks caused by splice joints going through 630-784-0800 Benefits —Rollers secure exact defined first point of contact of liner and single-faced board - No double kiss —Frame design avoids unintended lifting of roller shoe (compared to spring or air loaded systems) - No double kiss —Pressure can be increased or released for special grades or products 490 Tower Blvd., Carol Stream, IL Contact Chicago Electric to GET IT RIGHT 630-784-0800 [email protected] chicagoelectric.com Solution The ProPress system ensures an optimum heat transfer to the board. It offers a wide range of set- tings. The loadi g pressure can be varied, the number of shoes can be lifted in accordance t the line speed. The outer shoes can be lifted in accordance to the paper width. The shoe bars will be delivered pre-assembled for a short installation time. —Liftable for easy paper infeed and for cleaning of the machine —Position adjustable in paper direction to avoid grooves in hotplate Press Productivity Issue—Poor Heat Transfer Rollers are usually limiting the heat transfer, since they often have contact mainly on the edges of the plates due to wear or bent plates. They also cause often loss of caliper and bearing need to be replaced frequently. Airpressure actuated systems can only supply a limited pressure and have com- pared to shoe systems a closed surface. Pressure Shoe
Plate vity Issue—Poor Heat Control l hotplates are slow to react to pressure due to high steam volume and massive y also have high heat radiation and heat profile. Worn plates can damage crease edge crush.
Thin-Wall Hot Plates
t by peripheral drilled hot plates. anufactured out of special wear and nt steel, through which a continuous is drilled, with one inlet and one outlet. ecured by a massive steel frame.
CORR24usa.com
ance from steam to paper surface results in fast heat flow n higher plate surface temperature
Benefits
SupplyOne Acquires IC Industries, Continuing Growth In Florida Market Newtown Square, Pennsylvania, based SupplyOne, Inc. last week announced the acquisition of IC Industries, Inc., a privately-held corrugated converter and packaging com- pany headquartered in Hialeah, Florida. Founded in 1990 under the leadership of company president, Harvey Rothstein, IC Industries is a manufac- turer of corrugated boxes from its state-of-the-art Hialeah, Florida, facility and serves southern Florida manufacturers, retailers, growers and processors with custom corrugated and packaging products. “Joining forces with SupplyOne solidifies IC Industries’ position as a market leader in South Florida,” said Roth- stein. “SupplyOne’s decentralized operating structure en- sures that we will remain close to our clients. Access to additional services and product lines will mean growth op- portunities for our customers and our employees.” “The addition of IC Industries allows us to expand our converting capabilities in Florida to be more efficient, low- er costs, and provide enhanced custom corrugated pack- aging solutions to our customers,” said Bill Leith, CEO and President of SupplyOne, Inc. “IC Industries’ customers will benefit from expanded size and scale, and packaging au- tomation expertise that will help them be more profitable, as well.”
Box Shipments ( U.S. Corrugated Product Shipments) Industry Shipments In Billions of Square Feet Month September 2021
Year
Actual
Percent Change Avg Week Percent Change
2021 2020
34.261 34.901
-1.8
8.157 8.310
-1.8
Industry Total
Year-to Date
September 2021
Year
Actual
Percent Change Avg Week Percent Change
2021 2020
312.632 300.767
3.9
8.227 7.873
4.5
Industry Total
Containerboard Consumption (Thousands of Tons)
Year
Month
Percent Change Year-to-Date Percent Change
2021 2020
2.7786 2.8459
-2.4
25.4959 24.5672
3.8
Container Board Inventory - Corrugator Plants (Thousands of Tons)
Corrugator Plants Only
Date
Percent Change Weeks of Supply
Percent Change
Sept.
2.312
3.8
3.5 3.4
2.9
Aug
2.2272
Shipping Days
Year
Month
Year-to-Date
2021 2020
21 21
190 191
SOURCE: Fibre Box Association
Puhl custom designs systems to meet your needs. • Moving to a new facility? Puhl has experience moving entire plant systems all while minimizing down time in BOTH plants during the transition. • Below roof AND above roof systems custom designed to meet your needs. • New and Remanufactured Equipment (balers, blowers, separators, filters and more). Our Remanufactured equipment includes a warranty and offers significant savings. • NFPA and OSHA compliant systems designed by our NFPA trained engineering team. • Dust Briquetters, Certified Explosion Isolation Valves, Flame Front Diverters and more to control dust and meet NFPA requirements. • PLC Touch Screen Controls with Real Time Pressure Balancing and Real Time Remote Monitoring available on your smart phone or computer.
Balers • Shredders • Trim Collection Systems • Dust Collection Systems • Cyclones Trim Separators • Spiral Duct • Used Equipment • Filters • Briquetters 240 Airport Road | Gallatin, TN 37066 | 615.230.9500 | FAX 615.230.9590 | [email protected] | www.gfpuhl.com Follow us on LinkedIn
8
www.boardconvertingnews.com
December 6, 2021
AICC Member Milestone Program To Recognize Company’s Success AICC, The Independent Packaging Association, is accept- ing submissions to the Member Milestone Program. This is an annual opportunity to celebrate member companies, both Boxmaker and Associate, who are celebrating signif- icant anniversaries, such as 40, 50, 60, 70, 75, 80, 90, 100 (and so on) years of continuous operation. Members in good standing that wish to be included in this recognition should be celebrating an anniversary in 2022 and should provide a 2-3-minute video presentation featuring the history of their company and describing their growth. The members that submit qualifying videos by the deadline will be recognized during the closing general session of the 2022 Spring Meeting being held at the JW Marriott Desert Springs Resort, in Palm Desert, CA, April 6-8, 2022. The video compilation of all qualifying compa- nies will be shown and the member representatives will then be called on stage to receive a recognition plaque. AICC will also recognize the Milestone Members in a variety of ways, including a post-meeting news release in BoxScore , Board Converting News , on AICC’s social me- dia, and on the AICC website following the meeting. The deadline for submissions is Friday, February 11, 2022. Visit www.AICCbox.org/Milestone for full details and specifications.
Board Converting News is read by more independent and integrated decision-makers in the corrugated and folding carton industries than any other weekly publication. LEVERAGE YOUR REACH. Expansive Reach
Len Prazych at 518-366-9017 [email protected]
Convey with Confidence ™ AES is a leading provider of integrated turnkey systems for scrap collection, baling, and dust control, with custom-built solutions designed to meet the unique challenges of your industry.
SCRAP COLLECTION & BALING SYSTEMS
NFPA-COMPLIANT DUST CONTROL SOLUTIONS
YOUR PARTNER IN PROCESS IMPROVEMENT
NEW & USED EQUIPMENT | VIRTUAL SITE VISITS | 24/7 EMERGENCY SERVICE
535 HAGEY ROAD, SOUDERTON, PA 18964 (800) 572-9998 | [email protected] | WWW.AESALES.NET CONVEY WI TH CONF IDENCE ™
10
www.boardconvertingnews.com
December 6, 2021
THE NEW RD115/135S
The NEW KOLBUS Hycorr RD115/135S Flexo Rotary Die Cutter represents years of investment by the KOLBUS engineering team in Rahden, Germany and the Hycorr technical team in Kalamazoo, Michigan. This cooperation, combined with the input from our customers, has resulted in the ultimate blend of quality, performance, and value. Designed with all corrugated markets in mind, the RD115/135S is well equipped for high throughput, quick make-ready, and high graphics print production. With a complement of new features and benefits to accompany.
KOLBUS America Inc. | 216-931-5100 | [email protected]
JB Machinery Expands, Cuts Ribbon On Opening Of Neenah Manufacturing Facility The leadership team of Westport, Connecticut based JB Machinery re- cently cut the ribbon at the grand opening of its expanded and updat- ed manufacturing facility in Neenah, Wisconsin. The 8-month project in- creased the functional space of the XDS facility, the design/engineering and manufacturing division of JB Machinery, nearly doubling the size to
Packaging ERP Algorithmic Scheduling Web-Based Access Online Customer Portals
Paperless Workflows Mobile Sales Systems Digital Signage Production Monitoring Mobile Logistics Management Analytics & Reporting Cloud Hosting IT Management Services Cyber Security Management
700+ Plants 60,000 Users North America Latin America Europe
30,000 square feet (9144 sqm). The expansion allowed XDS to streamline the manufacturing process, expand the Research and Development Lab and enhance the engineering and customer experience spaces. “We had simply outgrown our manufacturing space,” said JB President Warren Bird. “All of our floor space was taken up by manufacturing and the demand for JB products was taxing the capacity of the facility. In order to meet the growing demand for JB products, it was obvious to us there was a need to expand the physical aspects of our business.” In addition to providing more room to work, the expanded space al- lowed XDS to restructure their workflow to minimize footsteps and max- imize the efficiency from Engineering to Shipping. According to Jeff DeVries, President of XDS, “Every square foot of manufacturing space was filled with something. We often had to spread one project around another as workspace became available. Now our operation is structured for commonality of process with a streamlined workflow that allows us to optimize our time from order placement to order shipment, while creating a comfortable work environment for our employees.” Research and Development is an important part of JB’s business mod- el. “We are continually assessing our customers’ current and future needs, evaluating the direction of the industry and envisioning products to en- hance the efficiency, quality and safety of converting and finishing lines,” said Bird. “Expanding and updating our Research Lab was a top priority in the project. The new lab space provides more room for development and testing and will help us reduce time-to-market with new JB products.” The project included the addition of high efficiency industrial lighting throughout the manufacturing area and a state-of-the-art high efficiency, enhanced filtration HVAC system to maintain a comfortable, clean, and healthy environment for employees and product assembly. John Bird, center, cuts the ribbon at the grand opening of JB Machinery’s new facility in Neenah, Wisconsin. From left are Dave Burgess (JB), Bob Manders (XDS), Nathan Bird, Tanya (Bird) Rubin, John Bird, Warren Bird, Spencer Bird (JB), Don Wagner, Jeff Devries (XDS).
12
www.boardconvertingnews.com
December 6, 2021
“We can help you protect, adapt, and optimize with our proven, agile solutions.”
Cosmo DeNicola Chairman, Amtech Software
URGENT NEEDS
IMMEDIATE SOLUTIONS
Cyber Security
Move to the Amtech Cloud Network and Cyber Security Tools
Out-of-Date Pricing
Automated, Real-Time Costing Update
Customer Service Disruptions Remote Workforce Platform
Online Customer Ordering Portals
Paper-BasedWorkflows
Paperless, Electronic Document Management
“Forget months...great things can happen in weeks, days, and hours.”
Give us a call at: 215.639.9540 Reach out to: [email protected] www.amtechsoftware.com
AICC Announces Seminars Scheduled For December
erations that are critical, but sometimes overlooked when selecting new converting equipment. Milton Corsey, AchieveNEXT Relational Capital, will help leaders learn how to empower their teams and help others grow into their positions during “Empowering Oth- ers for Success” on Thursday, December 9. This webinar will work through the empowerment matrix, enable at- tendees to develop a dialogue to transfer power to others. In 2021, the U.S. EEOC announced that for the 11th year in a row, retaliation was the #1 basis of all charges filed. During “Workplace Retaliation: The Employment Boomer- ang” on Tuesday, December 14, Christine Walters, FiveL Company, will help attendees understand these charges and what they can do to avoid them. Understanding the customer will lead to more sales and profits. Attendees will learn to “Leverage the Voice of Your Customers to Grow Revenue” on Wednesday, De- cember 15, with popular AICC speaker, Mark Allen Rob- erts, OTB Solutions. Members can register for individual webinars or join them as part of the All Access Pass. Pass holders can use their promo code to register at no additional cost. One payment of $1,695 gives participating companies a code that all employees can use to register for every webinar scheduled through July 2022. Each company also re- ceives a recording of each webinar. With more than 50 webinars scheduled, the All Access Pass represents a val- ue of $12,500. Learn more at www.AICCbox.org/Pass .
AICC, The Independent Packaging Association, is host- ing webinars for sales, leadership, and HR this December. Also, the AICC Emerging Leaders will come together for two free virtual events. The first, the Q4 C-Suite Leader- ship Webinar on Wednesday, December 3, will focus on HR with Donna Roberts, SMC Packaging Group, bringing her experience and ideas to the discussion. On Tuesday, December 7, two Emerging Leader al- ums, Jeff Dietz of Kolbus and Bill Nolan of Standard Print- ing Company, will have an interactive discussion with the Emerging Leaders on business successes and challenges from the past year and how they are using this information to build their strategy for next year. These events are open only to AICC Emerging Leaders. The industry can support the next generation of leaders by encouraging their growth through leadership training and networking. Visit www.AICCbox.org/Leader for more info. Registration for the following webinars is available to all AICC members. Selecting a converting machine based on specifica- tions alone can lead to disappointment. In “Critical Con- siderations Overlooked When Selecting New Converting Equipment” on Wednesday, December 8, created with the support of Etra Corrugated, attendees will discuss consid-
14
www.boardconvertingnews.com
December 6, 2021
Cybersecurity, Sustainability & More Highlighted At 2021 PPC Fall Meeting Sustainability, cybersecurity, powering the future, curbing burnout, and the global economic outlook were just some of the critical topics discussed during PPC’s recent Fall Meeting & Leadership Conference in Savannah, Georgia. After more than a year of virtual meetings, nearly 200 folding carton industry executives came together for three days of insight, networking and camaraderie. In addition to exciting speakers, the meeting included a celebration of the 2021 North American Paperboard Packaging Competi- tion winners, as well as a special evening recognizing the lifetime achievement of former WestRock chief executive officer Steven Voorhees, who received PPC’s highest hon- or, the Robert T. Gair Award. The conference’s keynote address came from John
Gift, Chief Information Security Officer at WestRock, who discussed how to maintain resiliency and security in light John Gift, Chief Information Security Officer at WestRock.
of ransomware attacks. Gift, a dedicated and experienced cybersecurity professional, leads all domestic and international security func- tions at WestRock. Throughout his presenta- tion, Gift reiterated, “Cybersecurity is an eco- system because its impact touches just about every employee, supplier, and customer with- in an organization’s business network.” Knowing this, when putting together a cy- bersecurity preparedness strategy, Gift said it’s imperative to not only represent your orga- nization, but include your supply chain as well. Gift also made it clear that cyberattacks are on the rise. “There has been a 109 percent increase in ransomware attacks since 2020, and the global cost of ransomware attacks last year alone was $11 billion.” According to the FBI, cyberattacks, ran- somware, and supply chain threats on the manufacturing industry specifically, have in- creased threefold. “It’s no longer a matter of if, it’s a matter of when an attack takes place, and that makes preparation an essential task. Improving your incidence response proto- cols, business continuity measures, and crisis management techniques is your best defense again widespread cyber-attacks.” Gift was just one knowledge leader who presented during PPC’s Fall Meeting & Leader-
DESIGNS THAT INCREASE PRODUCTION
ASDI offers: • 34 years of experience with separators, cyclones and conveyors • Sequential, Zero-Defect and various types of Scrap Systems • Each system is guaranteed to meet customer specifications • Turnkey Systems-handling all grades of paper and paperboard • In ground and overhead return conveyor systems direct to balers • Replace your undersized or aging cyclone over a two or three-day weekend • Representing a complete line of shredders, wet scrubbers and filters • NFPA compliant systems, ISN Network
ship Conference. Addition- ally, Kathi Rowzie, president of Two Sides North Ameri- ca, showcased the impor- tance of improving com- munication of sustainability practices when promoting
Air Systems Design Inc .
50 East Court Mandeville, La 70471
Ph: 985-875-7777 Fx: 985-875-7778
\
Kathi Rowzie
email: [email protected] • www.airsystemsdesign.com
paperboard products; Dr. Ann Bowers-Evan- gelista presented to PPC women leaders on
CONTINUED ON PAGE 18
16
www.boardconvertingnews.com
December 6, 2021
Increase Productivity by 15% in 30 Days* *Actual results may vary and could be even higher.
IMMEDIATE RESULTS Improve Efficiency Increase Visibility Motivate Crews
START TODAY Install It Yourself Remote Training Bring Your Own TV
Affordably Priced: $5,000/Machine
Any Machine, Any Box Software, Anywhere. ScoreKeeper
[email protected] | 215.639.9540 | www.amtechautomation.com
PPC Fall Meeting (CONT’D FROM PAGE 16)
the buzz-term, “burnout,” and why there’s been a dramatic increase of burnout amongst women due to the pandemic; Michael Housley, president of Leg- acy Energy, reiterated that market disruptions and energy spikes will continue to occur and they can happen just about anywhere in the United States; and professor Jeff Rosensweig of Emory University presented his economic roadmap that showcased the significance of the global economic outlook, along with a forecast of what’s expected to come. PPC’s 2022 Spring Outlook & Strategies Conference Dr. Ann Bowers-Evangelista
will take place on March 9-11, 2022, in Denver, Colorado. During the Spring Outlook, in addition to programming that will provide in- novative ways to help folding car- ton organizations succeed in the marketplace, PPC will also cele- brate the finalists of the 2021 Stu- dent Design Challenge, a competi-
ProfessorJeff Rosenswieg
tion hosted by The Paperboard Packaging Alliance (PPA), a joint initiative between the American Forest & Paper As- sociation (AF&PA) and the PPC.
Let’s Tell Our Recycling Story
Investment, Jobs Created, Tons Produced
Rick Van Horne, Director of Creative Marketing [email protected] Corrugated Supplies Corp. LLC
18
www.boardconvertingnews.com
December 6, 2021
Unbox new opportunities
Make the move to digital – and unbox your business with the power of just-in-time jobs, fast-cycle proofs and prototypes, and customized campaigns. With the EFI TM Nozomi C18000 Plus digital press for corrugated packaging and POS, you can offer endless creative opportunities with VDP, white ink, and more. And personalize runs from one to infinity at higher margins and with lower costs – all in a single pass. Let’s build your brilliant future. Together. Visit nozomi.efi.com/bcn to learn how corrugated converters and packaging printers are opening up new opportunities.
AICC Canada Celebrates Holidays With ‘Maskerade’ Party In Toronto On Saturday, November 20, more than 65 AICC Canada members came together for a holiday “Maskerade” par- ty at the Sheraton Toronto Airport Hotel and Convention Center. It was a triumphant return of sorts as the popular event was canceled last year due to the pandemic. Frank Fortunato of Flint
It was another event of elegance, entertainment and good friends celebrated in the spirit of the season. AICC wants to thank AICC Canada for its hospitality and extends its thanks to the event sponsors, Cascades,
Inks served as the emcee for the evening and kept things lively, as he always does. AICC International Canadian Board mem- ber Terri-Lynn Levesque from Royal Containers welcomed the guests, followed by remarks from AICC Canada President Don Duplantis, also of Royal Containers. Don in- troduced AICC Chairman Gene Marino from Akers Packaging, who carried on
Kim Nelson, left, of Royal Con- tainers and Peter Moore of Moore Packaging Corporation.
Krueger, Atlantic Packaging, Independent Corrugator, Flint Group, Niagara Sheets, Quest Inks, Royal Containers, Sun Chemical, Sheraton and the Nobleton Lakes Golf Club. AICC Canada President Don Duplantis, left, and AICC Pres- ident Mike D’Angelo capture a moment in the photo booth.
the tradition of the AICC Chair commencing the meal. The excellent dinner was followed by dancing, casino games, prize drawings and the ever-popular photo booth.
Serving the North American Corrugated and Folding Carton Industries Since 1985
...IS ALSO ONLINE! Visit: www.boardconvertingnews.com
20
www.boardconvertingnews.com
December 6, 2021
PCMC To Open New Packaging Innovation Center In Green Bay Green Bay, Wisconsin based Paper Converting Machine Company (PCMC), part of Barry-Wehmiller, announced it will open a new Packaging Innovation Center at its head- quarters in Green Bay, Wisconsin. The multi-purpose space is more than 4,700-square-feet in size and will serve as a hub for demonstrations, training, education, industry trials, and research and development. The Packaging Innovation Center will be the home of a Fusion C flexographic press, Hudson-Sharp’s Ares 400- SUP stand-up pouch machine, a Meridian Elite laser an- ilox cleaner, an ELS-MAX inline press and the ION digital printing platform. These machines will be available for demonstrations, as well as for hands-on learning and train- ing opportunities. The state-of-the-art center also features industry-leading tools and supplies for anilox sleeves, plate-mounting, color-proofing, plate and print inspection, sleeve-cleaning, and plate sleeves and tapes. “We’re excited to be able to welcome printing and con- verting customers into our facility to experience our inno- vations firsthand,” said Rodney Pennings, PCMC’s Direc- tor of Sales–Printing, Coating and Laminating. “Our new Packaging Innovation Center is a vision that we’ve had for several years, and it’s rewarding to see it finally be com- pleted.”
The Packaging Innovation Center will allow Hud- son-Sharp customers to complete trials in person on our equipment,” said Scott Romenesko, PCMC’s Director of Sales–Bag Converting. “It will be a valuable tool for our customers as they evaluate the best equipment to meet their needs.” An open house and ribbon cutting ceremony will be held in the spring of 2022. Additional partnerships and ed- ucational events will be announced in the coming months.
Bay Cities Hosts Open House, Ribbon Cutting In Bentonville
Pico Rivera, California based Bay Cities hosted an Open House and Ribbon Cutting on Tuesday, November 30, at its new offices in Bentonville, Arkansas. The Open House included a tour where participants: • Experienced emerging technologies in the innovation center, designed to challenge brands to stay relevant in the fast-paced retail landscape; • Explored Bay Cities’ manufacturing, >Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30 Page 31 Page 32 Page 33 Page 34 Page 35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44
Made with FlippingBook - Online magazine maker