Data Loading...
Johnsons Workwear - Product Catalogue
181 Downloads
57.82 MB
Twitter Facebook LinkedIn Copy link
RECOMMEND FLIP-BOOKS
Workwear garments
Including:
PROTECTION
WORKWEAR FOOD HEALTHCARE
V1.3-062022
TABLE OF
2
www.johnsonsworkwear.com
0800 592 254
CONTENTS
01 Protective Garments | Page 06 08 16
30
Anti-Static & Electro- Static Discharge
FR Anti-Static Coveralls, jackets, trousers, t-shirts and long johns.
Chemical Splash Coveralls, lab coats and coats.
Coats, polo shirt, trousers, t-shirt.
36
42
58
Cleanroom Coveralls, boots and hoods.
Electric Arc Coveralls, jackets, trousers, shirt, polo shirts, t-shirt and long johns.
High Visibility Waistcoats, polos, coveralls, sweatshirts, jacket, vests and trousers. Gryko® garments.
86
90
108
Molten Metal Marlan jackets and trousers.
Multi-Protection Gryko®, Cantex, Tera, Tranemo and Edge. Coveralls, jackets and trousers.
Aramid Inherent FR Coverall Made From Aramid Comfort Ripstop.
112
114
Paintroom Protection Coveralls.
Heat & Flame Coveralls, hoods, jackets, trousers, shirts, polo shirts, t-shirts and longjohns. Gryko®, Weldpro, Flamepro and Magma products.
3
TABLE OF
02 Essential garments | Page 152 154
188
192
Casual Fleeces, jackets, gilets, body warmers, sweatshirts, polos, t-shirts, sweatshirts and shorts.
Coats Gryko®, lab, cotton rich, and cotton drill.
Coveralls Gryko®, reflective and cotton rich.
202
212
Jackets Gryko®, cotton rich, reflective and zip.
Trousers Gryko®, cargo, knee
pocket, stretch boot cut, elasticated straight leg, knee pads and front crease.
4
www.johnsonsworkwear.com
0800 592 254
CONTENTS
03 Food garments | Page 236 238
242
252
Aprons Waist and bib.
Coats Contrast collar, knitted cuffs, butchers, no pockets, smock , upper and lower pockets.
Jackets Long length, no pockets, and 3 pockets.
254
256
259
Shirts Short sleeved, and long sleeved.
Coveralls No pockets and with pockets.
Trousers Elasticated waistband, no pockets and pockets.
04 Healthcare garments | Page 264 266 270
Gowns Reusable.
Scrubs Male, female and unisex.
5
01
m Protect gar en
6
www.johnsonsworkwear.com
0800 592 254
Protective workwear encompasses a wide variety of garments. We have the ultimate range to keep you safe and seen.
tive nts
Section includes:
Anti-static & Electro- static Discharge
Molten Metal
Multi-protect
FR Anti-static
Aramid Inherent FR Paintroom Protection against Heat & Flame
Cleanroom Chemical Splash Electric Arc
Hi-Vis, Hi-Vis FR, Hi-Vis Multi-protect, Hi-Vis Waterproof & Hi-Vis Railway
7
01 PROTECTIVE WORKWEAR
ANTI- STATIC
Anti-static &
(ESD) Electro-static Discharge
8
www.johnsonsworkwear.com
0800 592 254
CURRENT EUROPEAN NORMS
EN 1149-1:2006: Protective clothing - Electrostatic properties - Part 1: Test methods for surface resistivity. EN 1149-3:2004: Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay. EN 1149-5:2008: Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements. BS EN 61340-5-1:2007: Electrostatics - Protection of electronic devices from electrostatic phenomena. General requirements. (Test method IEC 61340-4-1)
FABRIC OPTIONS: ELECTRO-STATIC DISCHARGE
ElectroStatic Discharge (ESD) is a known cause of damage to sensitive electronic components during manufacture and handling and can cause failures to electronic systems during operation. Johnsons Workwear have a range of anti-static garments which are ideal for ungrounded applications where operators are manufacturing, assembling, installing or testing sensitive electronic equipment.
9
01 PROTECTIVE WORKWEAR
ANTI- STATIC
ANTI-STATIC ESD COAT
Concealed stud front fastening. Single breast pocket, 2 lower pockets. Plain hemmed sleeves with 1 stud adjuster.
Standards: EN 1149-3
BS EN 61340-5-1.
Weight:
175gsm
Fabric:
68% Polyester/ 30.5% Cotton/ 1.5%
Sizes:
S - 4XL Regular
Care:
Industrial Wash
Range:
Colour shown available from stock
10
www.johnsonsworkwear.com
0800 592 254
ANTI-STATIC ESD POLO SHIRT
Ribbed collar with 3 button fastening. 1 breast pocket. Hemmed sleeves
Standards: EN 1149-1
BS EN 61340-5-1.
Weight:
170gsm
Fabric:
98% Polyester / 2% Anti-Static
Sizes:
S – 2XL Regular
Care:
Domestic Wash
Range:
Colours shown are available from stock
11
01 PROTECTIVE WORKWEAR
ANTI- STATIC
ANTI-STATIC COAT
Concealed stud front fastening. Single breast pocket, 2 lower pockets. Plain hemmed sleeves with 1 stud adjuster.
Standards: EN 1149-3
Weight:
210gsm
Fabric:
64% Polyester/ 35% Cotton/ 1%
Sizes:
S - 4XL Regular
Care:
Industrial Wash
Range:
Colours shown are available from stock
12
www.johnsonsworkwear.com
0800 592 254
13
01 PROTECTIVE WORKWEAR
ANTI- STATIC
ANTI-STATIC TROUSER
Hook and bar fastening waistband with 7 beltloops. Metal zip fly. 2 side swing pockets in self fabric. One back hip pocket with Velcro fastening flap. 2 bellows thigh pockets with Velcro fastening flaps. Mobile phone pocket inside right thigh pocket.
Standards: EN 1149-3
Weight:
210gsm
Fabric:
64% Polyester/ 35% Cotton/ 1%
Sizes:
30 - 46 inch Regular Fits - 31 inch & Tall 33 inch
Care:
Industrial Wash
Range:
Colours shown are available from stock
14
www.johnsonsworkwear.com
0800 592 254
ANTI-STATIC ESD T-SHIRT
Knitted round neck collar. One breast pocket.
Standards: EN 1149-1
BS EN 61340-5-1.
Weight:
195gsm
Fabric:
51% polyester 48% Cotton 1% Anti-Static
Sizes:
S – 2XL Regular
Care:
Domestic Wash
Range:
Colours shown are available from stock
15
01 PROTECTIVE
WORKWEAR FR ANTI-STATIC
FR Anti- stat
16
www.johnsonsworkwear.com
0800 592 254
CURRENT EUROPEAN NORMS
EN ISO 11612 :2015 Protective clothing to protect against heat and flame. • Limited flame spread (code letter A). • Convective heat (code letter B). • Radiant heat (code letter C). • Molten aluminium splash (code letter D). • Molten iron splash (code letter E). • Contact heat (code letter F). EN ISO 11611 : 2015 Protective clothing for use in welding and allied processes • Limited flame spread (code letter A). • Impact of welding spatter (Class 1 or 2). • Heat transfer (Class 1 or 2). • Electrical resistance. EN 1149-5-2008 Protective clothing – Electro-Static properties. Material performance and design requirement. EN 61482-1-1: 2009 Test method – determination of the arc rating. (ATPV or EBT) EN 61482-1-2-2014 Test method – determination of arc protection class (Box test) Class 1 – 4KA / Class 2 – 7KA. IEC 61482-2-2009 Protective clothing against the thermal hazards of electric arc - requirements.
tic
FIRE RETARDANT ANTI- STATIC PERSONAL PROTECTION
FR Anti-Static is to be used in an area where there is a risk of hazardous sparks caused by electrostatic discharge that could result in fire and/or explosion. The Anti Static properties are there to reduce the build-up of Electrostatic Discharge. The fire retardant properties are there to protect the wearer against heat & Flame caused by Static build up. The Anti Static fabric used will always incorporate flame protection properties, either inherent or as a chemical finish.
17
01 PROTECTIVE
WORKWEAR FR ANTI-STATIC
FR ANTI-STATIC COVERALL
Concealed stud front fastening. 2 breast pockets with concealed stud fastening flaps. Set in sleeves. Action back and side waist elastication. 2 side swing pockets in self fabric with trouser access. Rule pocket to right leg FR reflective tape over shoulders around sleeves and legs.
Standards: EN ISO 11612:2015 A1, B1, C1, F1.
EN ISO 11611:2015 Class 1 A1.
EN1149-5:2008 EN1149-3:2004.
IEC 61482-2 Class 1 4kA / ATPV = 8.9cal/cm.
Weight:
290gsm
Fabric:
75% FR Cotton, 24% Polyester, 1% Anti-static, with FC finish to EN 13034
Sizes:
S - 4XL. Reg 29”, Tall 31”
Care:
Industrial wash. Special laundering conditions apply for garments with reflective tape Colours shown are available from stock
Range:
18
www.johnsonsworkwear.com
0800 592 254
TOP: Radio loop is positioned above the right breast pocket flap.
BOTTOM: Retro reflective tape is positioned around the sleeves and legs to give 360 0 visibility.
MODEL: Wears an FR belt.
19
01 PROTECTIVE
WORKWEAR FR ANTI-STATIC
FR ANTI-STATIC COVERALL
Concealed stud front fastening. 2 breast pockets with concealed stud fastening flaps. Set in sleeves. Action back and side waist elastication. 2 side swing pockets in self fabric with trouser access. Rule pocket to right leg.
Standards: EN ISO 11612:2015 A1, B1, C1, F1.
EN ISO 11611:2015 Class 1 A1.
EN1149-5:2008 EN1149-3:2004.
TOP: Radio loop is positioned above the right breast pocket. LEFT: Icon guide. A clear view of EN certification for which the garment complies.
Weight:
290gsm
Fabric:
75% FR Cotton, 24% Polyester, 1% Anti-static, with FC finish to EN 13034
Sizes:
S - 4XL. Reg 29”, Tall 31”
Care:
Industrial Wash
Range:
Colours shown are available from stock
20
www.johnsonsworkwear.com
0800 592 254
FLAMEPRO COVERALL
Two-way concealed front zip with storm flap. Two chest pockets with zip closure and storm flaps. One sleeve pocket. Action back pleats. Two radio loops. Elasticised waistband. Two back pockets. Two side pockets with hidden exterior-to-interior access. Internal knee pad pockets. Tool pocket on right leg. Concealed press stud on cuffs. 2 50mm wide reflective FR striping around arms, legs and over the shoulders.
Standards: EN ISO 11612 A1 + A2, B1, C1, F1:
IEC 61482-1-2, HRC2 11cal:
EN ISO 1149-5:
EN ISO 11611 A1
Weight:
350gsm
Fabric:
Daletec 98% Pyrovatex treated Cotton 2% Carbon Fibre
Sizes:
36 - 60 Regular 32.5 Inside Leg
Care:
Industrial Wash
Range:
Colours shown are available from stock
21
01 PROTECTIVE
WORKWEAR FR ANTI-STATIC
CLASSIC NORDIC COVERALL
Coverall has two zipped chest pockets and centre front fastening. Left sleeve has radio pockets, and legs have knee pad pockets.
Standards: EN ISO 11611:2015 A1, A2, B1, C2, F1.
EN 11611 Class 2 A1 A2
EN 1149-5:2018
IEC 61482 1-2-:2018 Arc Thermal Protection Value (ATPV) 10.2 Cal/cm2 = PPE 2 CAT 2 ELIM 9.7 Cal/cm2 Arc Protection Class (ACP) 1 (former Class 1) = 4KA
TOP: Nordic style retro reflective tape is positioned across the shoulder to increase visibility from above. BOTTOM: Back hip patch pocket on right side. Tow side swing pockets for comfort, and stud fastening cuffs.
Weight:
320gsm
Fabric:
80% cotton, 19% polyester, 1% anti-static
Sizes:
UK34 - UK60 I/L 31 Longer Leg. Lengths are available on request
Care:
Industrial Wash
Range:
Colours shown are available from stock
22
www.johnsonsworkwear.com
0800 592 254
23
01 PROTECTIVE WORKWEAR
ANTI- STATIC
FR ANTI-STATIC JACKET
TOP: Icon guide. A clear view of EN
certification for which the garment complies
Concealed stud front fastening. 2 breast pockets with concealed stud fastening flaps. Set in sleeves. Action back.
LEFT: Two breast pockets with Flap.
RIGHT: Breast pocket has stud fastening for additional security.
Standards: EN ISO 11612:2015 A1, B1, C1, F1.
EN ISO 11611:2015 Class 1 A1.
EN1149-5:2008
EN1149-3:2004.
Weight:
290gsm
Fabric:
75% FR Cotton, 24% Polyester, 1% Anti-static, with FC finish to EN 13034
Sizes:
S - 4XL Regular
Care:
Industrial Wash
Range:
Colour shown available from stock
24
www.johnsonsworkwear.com
0800 592 254
FR ANTI-STATIC TROUSER
Hook and bar fastening waistband with 7 belt loops. Metal zip fly. 2 side swing pockets.
Standards: EN ISO 11612:2015 A1, B1, C1, F1.
EN ISO 11611:2015 Class 1 A1.
EN1149-5:2008
EN1149-3:2004.
Weight:
290gsm
Fabric:
75% FR Cotton, 24% Polyester, 1% Anti-static, with FC finish to EN 13034 EN13034:2005+A1:2009.
Sizes:
30 - 46. Reg 31”, Tall 33”
Care:
Industrial Wash
Range:
Colours shown are available from stock
TOP: Side swing pocket. Icon guide. A clear view of EN certification for which the garment complies.
25
01 PROTECTIVE
WORKWEAR FR ANTI-STATIC
Concealed one-way, black high density polyester coil zip with brass snap closure. Two chest pockets with flaps, one with a separate mobile phone pocket. Gas detector and pen pocket on left sleeve. Action back pleats for freedom of movement and comfort. Two large side pockets. Adjustable waistband. Concealed press button on cuffs. 2 50mm wide reflective FR striping around arms and over the shoulders. ANTI-STATIC FR JACKET
Standards: EN ISO 11612 A1 + A2, B1, C1, F1:
IEC 61482-1-2, HRC2 11cal:
EN ISO 1149-5:
Weight:
350gsm
Fabric:
Daletec 98% Pyrovatex treated Cotton 2% Carbon Fibre
Sizes:
S - XXXL
Care:
Industrial Launder
Range:
Colours shown are available from stock
26
www.johnsonsworkwear.com
0800 592 254
FR ANTI-STATIC TROUSER
Two deep side pockets. Two back pockets, one with flap. Large cargo pocket with separate mobile phone pocket on left leg, Double tool pocket on right leg, 2 50mm wide reflective FR striping around legs.
Standards: EN ISO 11612 A1 + A2, B1, C1, F1:
IEC 61482-1-2, HRC2 11cal:
EN ISO 1149-5:
Weight:
350gsm
Fabric:
Daletec 98% Pyrovatex treated Cotton 2% Carbon Fibre
Sizes:
30-50 Regular or Tall
Care:
Industrial Launder
Range:
Colours shown are available from stock
27
01 PROTECTIVE
WORKWEAR FR ANTI-STATIC
UNDERWEAR FR ANTI-STATIC T-SHIRT
Inherent Flame Retardant t-shirt underwear with long sleeves in a soft tricot. Round neck and long sleeves.
Standards: EN ISO 11612 A1 B1 C1 F1,
IEC 61482-2 CL.1 ARC RATING: 7.0cal/cm2, EN 1149-5
Weight:
235g/m 2
Fabric:
Cantex JX, 235g/m 2 , LOI: 30.1%
Sizes:
XXS - 3XL, 5XL,7XL
Care:
Industrial Wash
Range:
Colour shown available from stock
28
www.johnsonsworkwear.com
0800 592 254
UNDERWEAR FR ANTI-STATIC LONG JOHNS
Inherent Flame Retardant long johns in a soft tricot. Elasticated waist.
Standards: EN ISO 11612 A1 B1 C1 F1,
IEC 61482-2 CL.1 ARC RATING: 7.0 cal/cm2, EN 1149-5
Weight:
235g/m 2
Fabric:
Cantex JX, 235g/m 2 , LOI: 30.1%
Sizes:
XXS - 3XL, 5XL, 7XL
Care:
Industrial Wash
Range:
Colour shown available from stock
29
01 PROTECTIVE WORKWEAR
CHEMICAL SPLASH
Chemical splash
30
www.johnsonsworkwear.com
0800 592 254
CARE OF LIMITED CHEMICAL SPLASH PROTECTION Limited chemical splash garments are treated with a fluorocarbon (FC) finish which prevents penetration by water, oil and certain mild chemicals. But it is not permanent. In order to maintain the protection levels, the following guidelines should be observed during laundering: • Wash separately to garments with a standard type of finish. • To reactivate the finish dry in a tunnel dryer, ensuring the temperature does not exceed 160 o C (recommended temperature is 130 o C to 160 o C) • If the garments are dried in a tumble dryer, the inlet air temperature of the tumbler should attain at least 120 o C. This ensures the ‘reactivation’ of the finish and increases the repellent performance.
LIQUID CHEMICAL SPLASH PROTECTION Certain common forms of chemicals, such as reduced concentrations of acids and alkalis, are encountered by operators working in a wide range of industry sectors. The risks can be diverse, depending on the substances being handled, so it is essential that a risk assessment is carried out to determine the most appropriate type of protection required. This risk assessment will give important indications about the most suitable type of material, clothing design and composition of the most effective solution, e.g. combination with other types of PPE or other items of chemical protective clothing.
• Tumble drying at low temperatures and line drying should be avoided.
• The lifetime of the finish can be increased further by rinsing the garments with a fluorocarbon- based rinsing agent in the final rinse of the wash cycle. • The re-treatment of limited chemical splash garments can be carried out after every wash cycle for maximum performance. However, a treatment every 5 wash cycles should suffice, if accompanied by adequate drying conditions to reactivate the FC finish properly.
31
01 PROTECTIVE WORKWEAR
CHEMICAL SPLASH
CHEM SPLASH COVERALL
Concealed stud front fastening. 2 breast pockets with concealed stud fastening flaps. Set in sleeves. Action back. 2 side swing pockets in self fabric with trouser access. Rule pocket.
Standards: Fabric used is certified to EN13034 Weight: 270gsm Fabric: 100% Polyester Sizes: 92cm-140cm, 8cm increments- Reg 29inch, Tall 31inch. Care: Industrial Wash
Range:
Colour shown available from stock
32
www.johnsonsworkwear.com
0800 592 254
TOP: Pocket flaps are 2cm larger than pockets to stop any unwanted ingression and have a secure stud closure. RIGHT: Elasticated side waist gives comfort and flexibility.
33
01 PROTECTIVE WORKWEAR
CHEMICAL SPLASH
Concealed stud front fastening with exposed stud to shoulder and collar. Stand collar. Single internal lower patch pocket. Long sleeves with knitted cuffs. Finished length: 110cm. CHEM SPLASH HOWIE LAB COAT
Standards: Fabric used is certified to EN 13034 Weight: 245gsm Fabric: Polyester / Cotton with DFC Finish Sizes: 92 - 140cm 8cm increments Care: Industrial Wash
Range:
Colour shown available from stock
TOP: Asymmetrical front neck studded closure. BOTTOM: Flexible comfort knit cuff.
34
www.johnsonsworkwear.com
0800 592 254
TOP: Coat has a breast pocket with pen divider section. BOTTOM: Centre back vent.
CHEM SPLASH COAT
Concealed stud front fastening. Single breast patch pocket with pen pocket. 2 lower patch pockets. Side access slits. Plain hemmed sleeves. Back Vent. Finished length: 112cm.
Standards: Fabric to EN13034 or equivalent, garment is not certified to EN13034 Weight: 245gsm Fabric: 65% Polyester/ 35% Cotton with DFC Sizes: S - XXL, Regular Care: Industrial Wash
Range:
Colour shown available from stock
35
01 PROTECTIVE WORKWEAR
CLEAN ROOM
Clean
room
The basic requirements for cleanroom fabric is that it should be non-linting and have good filtration efficiency to prevent particles from being released within the controlled environment. All garments in our Cleanroom range are manufactured using densely woven barrier fabrics to ensure the highest standard of particle control. For use in ISO Class 3 Cleanrooms. A superior anti-static performance is achieved by a conductive carbon yarn which controls the risk of static build up. The carbon yarn is woven into the fabric therefore makes the anti- static properties permanent and can withstand the demands of the specialist cleaning processes in an Industrial laundry.
36
www.johnsonsworkwear.com
0800 592 254
CLEANROOM COAT
Concealed zip front fastening. Stand collar. Raglan sleeves with knitted cuffs. All edges are heat sealed before sewing. Seams are twin needle stitched.
Standards: Fabric Conforms to EN 1149-1:2006 EN 1149-3 (NFPA 99) Weight: 105gsm Fabric: 98% polyester filament yarn, 2% anti-Static grid Sizes: Small to 3XL- Regular Fit Care: Industrial Wash
Range:
Colour shown available from stock
37
01 PROTECTIVE WORKWEAR
CLEAN ROOM
CLEANROOM COVERALL
Concealed plastic zip front fastening. Stand collar. Raglan sleeves. Adjustable stud fastening cuffs and ankles. All edges are heat sealed before sewing. Seams are twin needle stitched.
LEFT: Centre front zip with guard and stud closure ensuring complete coverage. RIGHT: Adjustable stud, cuff fastening.
Standards: Fabric tested to EN1149:1 and EN1149-3: NFPA 99 Weight: 105gsm Fabric:
98% polyester filament yarn, 2% anti-static grid
Sizes:
Small to 3XL Regular Fit
Care:
Industrial Wash
Range:
Colour shown available from stock
38
www.johnsonsworkwear.com
0800 592 254
39
01 PROTECTIVE WORKWEAR
CLEAN ROOM
CLEANROOM BOOT
Calf length boot with elasticated top hem. Two stud adjustment at the front and two ties attached to the heel to ensure a comfortable fit. Dissipative flat sole. All edges are heat sealed before sewing. Seams are twin needle stitched.
Standards: Fabric tested to EN 1149:1 and EN 1149-3: NFPA 99 Weight: 105gsm Fabric: 98% polyester filament yarn, 2% anti-static Sizes: Small to 3XL Regular fit Care: Industrial Wash
Range:
Colour shown available from stock
40
www.johnsonsworkwear.com
0800 592 254
CLEANROOM HOOD
Adjustable stud front fastening. Stud adjustment at the back for improved fit. All edges are heat sealed before sewing. Seams are twin needle stitched.
Standards: Fabric tested to EN1149:1 and EN 1149-3: NFPA 99 Weight: 105gsm Fabric:
98% polyester filament yarn, 2%
Sizes:
S - 3XL Regular
Care:
Industrial Wash
Range:
Colour shown available from stock
41
01 PROTECTIVE WORKWEAR
ELECTRIC ARC
Electric arc
CURRENT EUROPEAN NORMS
Electric Arc is essentially an electric discharge that produces plasma discharge between two conductors. The arc is the spark that jumps between any gap created in an electrical system. This can be a bolt of lightning jumping between a cloud and a point on earth, or more commonly the tiny spark that can occur when a light switch is flicked on or off. Our Electric Arc garments cover a wide range of sectors industrial
EN 61482 – 1-1:2009: Test Method – Determination of the arc rating (ATPV or EBT). EN 61482 – 1-2:2007: Test Method – Determination of arc protection class (box test) Class 1 – 4kA Class 2 – 7kA.
EN ISO 11612-2008: Protective Clothing - Protection against heat and flame. EN ISO 11611-2007: Protective Clothing – For use in welding and allied processes. IEC 61482 – 2:2009: Protective Clothing – Against the thermal hazards of an electric arc – requirements.
electrical, power generation, Rail, Windpower, Utilities and petrochemical.
42
www.johnsonsworkwear.com
0800 592 254
CLASSIC NORDIC COVERALL
Coverall has two zipped chest pockets and centre front fastening. Left sleeve has radio pockets, and legs have knee pad pockets.
Standards: EN ISO 11611:2015 A1, A2, B1, C2, F1.
EN 11611 Class 2 A1 A2
EN 1149-5:2018
IEC 61482 1-2-:2018 Arc Thermal Protection Value (ATPV) 10.2 Cal/cm2 = PPE 2 CAT 2 ELIM 9.7 Cal/cm2 Arc Protection Class (ACP) 1 (former Class 1) = 4KA
Weight:
320gsm
Fabric:
80% cotton, 19% polyester, 1% anti-static
Sizes:
UK34 - UK60 I/L 31 Longer Leg. Lengths are available on request
Care:
Industrial Wash
Range:
Colours shown are available from stock
43
01 PROTECTIVE WORKWEAR
ELECTRIC ARC
FR ANTI-STATIC COVERALL
Concealed stud front fastening. 2 breast pockets with concealed stud fastening flaps. Set in sleeves. Action back and side waist elastication. 2 side swing pockets in self fabric with trouser access. Rule pocket to right leg FR reflective tape over shoulders around sleeves and legs.
Standards: EN ISO 11612:2015 A1, B1, C1, F1.
EN ISO 11611:2015 Class 1 A1.
EN1149-5:2008 EN1149-3:2004.
IEC 61482-2 Class 1 4kA / ATPV = 8.9cal/cm.
Weight:
290gsm
Fabric:
75% FR Cotton, 24% Polyester, 1% Anti-static, with FC finish to EN 13034
Sizes:
S - 4XL. Reg 29”, Tall 31”
Care:
Industrial wash. Special laundering conditions apply for garments with reflective tape Colours shown are available from stock
Range:
44
www.johnsonsworkwear.com
0800 592 254
FLAMEPRO COVERALL
Two-way concealed front zip with storm flap. Two chest pockets with zip closure and storm flaps. One sleeve pocket. Action back pleats. Two radio loops. Elasticised waistband. Two back pockets. Two side pockets with hidden exterior-to-interior access. Internal knee pad pockets. Tool pocket on right leg. Concealed press stud on cuffs. 2 50mm wide reflective FR striping around arms, legs and over the shoulders.
Standards: EN ISO 11612 A1 + A2, B1, C1, F1:
IEC 61482-1-2, HRC2 11cal:
EN ISO 1149-5:
EN ISO 11611 A1
Weight:
350gsm
Fabric:
Daletec 98% Pyrovatex treated Cotton 2% Carbon Fibre
Sizes:
36 - 60 Regular 32.5 Inside Leg
Care:
Industrial Wash
Range:
Colours shown are available from stock
45
01 PROTECTIVE WORKWEAR
ELECTRIC ARC
Concealed two way polyester zip. Two chest pockets with concealed zip closure. Mobile phone and pen pocket is positioned on the sleeve, two radio loops and internal chest pocket. Action back for ease of flexibility. Two swing pockets for exterior-to-interior access through pocket lining. Rule and tool pocket on right leg, internal knee pads pockets. Cuffs are concealed snap fastenings. SHIPPING COVERALL
Standards: EN ISO 11612 A1 + A2, B1, C1;
IEC 61482-1-2Electric Arc Flash
Weight:
290gsm
Fabric:
Daletec 75/25% Pyrovatex Treated Cotton/Polyester
Sizes:
36 - 60 Regular
Care:
Suitable for industrial laundering, special laundering conductions apply for garments with reflective tape Colours shown are available from stock
Range:
46
www.johnsonsworkwear.com
0800 592 254
WELDPRO COVERALL Front button closure. Two chest pockets. Elasticised waistband. Two side pockets, Ruler and tool pocket on right leg. Internal knee pad pockets knee pads sold separately.
Standards: EN ISO 11612 A1 + A2, B1, C1, F1;
IEC 61482-1-2;
EN ISO 11611, Class 2 Class 1
Weight:
450gsm
Fabric:
Daletec 100% Pyrovatex Treated Cotton
Sizes:
36 - 60 Regular 32.5 inside leg
Care:
S uitable for industrial laundering, special laundering conductions apply for garments with reflective tape Colours shown are available from stock
Range:
47
01 PROTECTIVE WORKWEAR
ELECTRIC ARC
ANTI-STATIC FR JACKET
Concealed one-way, black high density polyester coil zip with brass snap closure. Two chest pockets with flaps, one with a separate mobile phone pocket. Gas detector and pen pocket on left sleeve. Action back pleats for freedom of movement and comfort. Two large side pockets. Adjustable waistband. Concealed press button on cuffs. 2 50mm wide reflective FR striping around arms and over the shoulders.
Standards: EN ISO 11612 A1 + A2, B1, C1, F1:
IEC 61482-1-2, HRC2 11cal:
EN ISO 1149-5:
Weight:
350gsm
Fabric:
Daletec 98% Pyrovatex treated Cotton 2% Carbon Fibre
Sizes:
S - XXXL
Care:
Industrial Launder
Range:
Colours shown are available from stock
48
www.johnsonsworkwear.com
0800 592 254
FR ANTI-STATIC TROUSER
Two deep side pockets. Two back pockets, one with flap. Large cargo pocket with separate mobile phone pocket on left leg, Double tool pocket on right leg, 2 50mm wide reflective FR striping around legs.
Standards: EN ISO 11612 A1 + A2, B1, C1, F1:
IEC 61482-1-2, HRC2 11cal:
EN ISO 1149-5:
Weight:
350gsm
Fabric:
Daletec 98% Pyrovatex treated Cotton 2% Carbon Fibre
Sizes:
30-50 Regular or Tall
Care:
Industrial Launder
Range:
Colours shown are available from stock
49
01 PROTECTIVE WORKWEAR
ELECTRIC ARC
MAGMA FR JACKET
Flame Retardant jacket in a comfortable fabric with the highest protection against molten aluminium. The fabric also has good properties against other molten metals. Concealed front zip and button closing. High collar and extended back for extra protection. Chest pockets with flaps, concealed keyring holder under right flap. Strap for pen/tools. Roomy side pockets with flaps. Adjustable cuffs with press studs. Reflective stripes on sleeves and over shoulders.
Standards: EN ISO 11612 A1+A2 B1 C1 D3 E3 F1, IEC 61482-2 CL.1 ARC RATING: 9.5 cal/cm 2 EN ISO 11611 Cl.2, ISO 9185
Weight:
370g/m 2
Fabric:
Magma C, 370 g/m 2 , Cl.2, ISO 9185 Cryloite, LOI: 25.9%, Fluorescent, Magma HV, 375 g/m 2 XS - 4XL Male and Female fit available on request
Sizes:
Care:
Industrial Wash
Range:
Colour shown available from stock
50
www.johnsonsworkwear.com
0800 592 254
MAGMA FR TROUSERS Flame Retardant trousers with shoe protection in a comfortable fabric with the highest protection against molten aluminium. The fabric also has good properties against other molten metals. Front pockets. Hip pocket with flap. Strengthened ruler pocket with flap. Shoe protection and heavy protection on the lower front of the legs. Thin reflective stripes on the back of the legs.
Standards: EN ISO 11612 A1+A2 B1 C1 D3 E3 F1,
IEC 61482-2 CL.1 ARC RATING: 9.5 cal/cm 2 EN 11611 Class 2 A1 A2
Weight:
370g/m 2
Fabric:
M agma C, 370 g/m 2 , Fluorescent, Magma HV, 375 g/m 2
Sizes:
30-50R, 32-40T, 30-48S
Care:
Industrial Wash
Range:
Colour shown available from stock
51
01 PROTECTIVE WORKWEAR
ELECTRIC ARC
TOP: Inherent flame retardant fabric, contrast back yoke and top sleeve to increase visability.
MAGMA FR SHIRT
Non-metal and Inherent Flame Retardant shirt made from a comfortable fabric with the highest protection against molten aluminium. The fabric also has good properties against other molten metals. Double button placket and concealed press studs. Chest pockets with flaps. Ventilations on the back. Adjustable cuffs with press studs.
Standards: EN ISO 11612 A1+A2 B1 C1 D3 E3 F1, IEC 61482-2 ARC RATING 8.3 cal/cm 2 Weight: 310g/m 2 Fabric:
M agma S, 310 g/m 2 , Fluorescent, LOI: 27.8%
Sizes:
XS - 4XL
Care:
Industrial Wash
Range:
Colour shown available from stock
52
www.johnsonsworkwear.com
0800 592 254
Long sleeve polo shirt with button fastening neck. Double layer reinforcement at shoulders. LONG SLEEVE POLO SHIRT
Standards: EN ISO 11612:2015 A1, B1, C1, F1.
EN 1149-5: 2008. EN 1149-3: 2004. EN 61482-2: 2009.
EN 61482-1-2: 2007 Class 1 4kA ATPV = 11.6cal/cm 2 , not suitable for welding
Weight:
220gsm
Fabric:
86% Cotton Proban 12% Nylon / 2% Anti-
Sizes:
S - 2XL Regular
Care:
Industrial wash.
Range:
Colour shown available from stock
53
01 PROTECTIVE WORKWEAR
ELECTRIC ARC
Non- metal, inherent flame retardant shirt with hi visibility fabric positioned across back shoulders and sleeve head. A small strip of retro reflective tape is positioned on the upper sleeve to increase visibility. Shirt collar and concealed front closing with stud fastening. Two chest pockets with stud flap closure and adjustable stud fastening cuffs. FR PRO SHIRT 5770 91
TOP: Inherent flame retardant fabric, contrast back yoke and top sleeve to increase visability.
Standards: EN ISO 11612 A1 B1 C1 F1
IEC 61482-2 Class 1 Arc rating 5.2 cal/cm2 EN 1149 – 5
Weight:
160g/m 2
Fabric:
C antex Pro and Florescent
Sizes:
XS - 4XL
Care:
Industrial Wash
Range:
Colour shown available from stock
54
www.johnsonsworkwear.com
0800 592 254
55
01 PROTECTIVE WORKWEAR
ELECTRIC ARC
UNDERWEAR FR ANTI-STATIC T-SHIRT
Inherent Flame Retardant t-shirt underwear with long sleeves in a soft tricot. Round neck and long sleeves.
Standards: EN ISO 11612 A1 B1 C1 F1,
IEC 61482-2 CL.1 ARC RATING: 7.0cal/cm2, EN 1149-5
Weight:
235g/m 2
Fabric:
Cantex JX, 235g/m 2 , LOI: 30.1%
Sizes:
XXS - 3XL, 5XL,7XL
Care:
Industrial Wash
Range:
Colour shown available from stock
56
www.johnsonsworkwear.com
0800 592 254
UNDERWEAR FR ANTI-STATIC LONG JOHNS
Inherent Flame Retardant long johns in a soft tricot. Elasticated waist.
Standards: EN ISO 11612 A1 B1 C1 F1,
IEC 61482-2 CL.1 ARC RATING: 7.0 cal/cm2, EN 1149-5
Weight:
235g/m 2
Fabric:
Cantex JX, 235g/m 2 , LOI: 30.1%
Sizes:
XXS - 3XL, 5XL, 7XL
Care:
Industrial Wash
Range:
Colour shown available from stock
57
01 PROTECTIVE WORKWEAR
HIGH VISIBILITY
High
visibilit
CURRENT EUROPEAN NORMS
EN 20471: 2003: Hi Visibility Test Methods and Requirements. RIS -3279-TOM:
EN 11611: 2015: Protective Clothing for use in Welding & Allied Processes EN 11612: 2015 Protective Clothing to protect against Heat & Flame. EN 343: 2003+A1:2007/AC:2009: Protective Clothing to protect against Rain.
(formerly GO/RT 3279) Rail Industry standard for High Visibility Clothing.
58
www.johnsonsworkwear.com
0800 592 254
HIGH VISIBILITY PROTECTION
Johnsons Workwear offers a range of High Visibility garments which meet various standard requirements. Hi Visibility garments shall consist of a fluorescent background material to provide conspicuity during daylight conditions, and retro-reflective tape which ensures visibility under illumination of headlights in the dark. A garment shall have 360° visibility. This is achieved by encircling the body, arms and legs with horizontal fluorescent material and retro-reflective tape. There are three classes of high visibility garment based on the total area of fluorescent material and retro-reflective tape. Class 3 provides the highest level of conspicuity against most backgrounds, and Class 1 provides the lowest level. Selection should be based on a risk assessment in the required location or situation. All protective clothing must be kept in a clean condition in order to function correctly. This is particularly relevant with high visibility clothing. The visual performance of the garment will be affected by any soiling on the surface, and the wearer may be at risk. The importance of regular cleaning cannot be overstated. But the wearer must carefully select the washing and drying processes used for high visibility garments. Incorrect processing may permanently damage the fluorescent material and the retro-reflective tape. CARE OF A HIGH VISIBILITY GARMENT
ty
59
01 PROTECTIVE WORKWEAR
HIGH VISIBILITY
GRYZKO ® HI-VIS CONTRAST COVERALL
2 bands of reflective tape around chest, sleeves and legs. Nordic tape positioning over shoulders. 2 breast pockets with concealed stud fastening flaps. One internal smart phone pocket. 1 back hip pocket. Brass zip front fastening with concealed stud fastening storm flap. 2 external full width adjustable knee pad pockets with Velcro fastening. 2 side swing pockets. 2 cargo pockets. Action back. Side waist elastication. Twin stitching throughout. Contrast front and back yokes, pocket flaps, lower sleeves and lower legs. knee pads sold separately GZKP100.
Standards: EN ISO 20471:2013 Class 3
Weight:
270gsm / 300gsm
Fabric:
HV - 85% polyester / 15% cotton, Contrast - 65% polyester / 35% cotton
Sizes:
S - 4XL. Reg 29 inch, Tall 31inch
Care:
Industrial wash. Special laundering conditions apply for garments with reflective tape Colours shown are available from stock
Range:
60
www.johnsonsworkwear.com
0800 592 254
TOP: Concealed brass zip fastening with stud closure, contrast guard. LEFT: Breast pocket with contrast pocket flap secured with stud closure. RIGHT: Retro reflective tape gives 360 0 visibility around chest, arms and legs.
61
01 PROTECTIVE WORKWEAR
HIGH VISIBILITY
GRYZKO ® HI-VIS CONTRAST JACKET
TOP: Breast pockets have secure stud flap fastening. Each pocket flap is wider than the pocket to prevent it being tucked in. LEFT: Contrast fabric across the shoulders with Nordic style retro reflective tape to increase visibility from above.
2 bands of reflective tape around chest and arms with Nordic tape positioning over shoulder. 2 mitred breast pockets with concealed stud fastening. One internal smart phone pocket to left as worn. Chunky zip front fastening with concealed stud fastening stormflap. Sidewaist elastication and action back. Twin stitching. Contrast front and back yoke and pocket flaps.
Standards: EN ISO 20471:2013 Class 2
Weight:
270gsm
Fabric:
HV - 85% polyester / 15% cotton, Contrast - 65% polyester / 35% cotton
Sizes:
S - 4XL Regular
Care:
Industrial wash. Special laundering conditions apply for garments with reflective tape
Range:
Colour shown available from stock
62
www.johnsonsworkwear.com
0800 592 254
GRYZKO ® HI-VIS CONTRAST TROUSER
2 external full width adjustable knee pad pockets with concealed Velcro fastening to top. 2 front swing pockets, 1 back hip pocket. 2 cargo pockets with flaps,2 bands of reflective tape around legs. Twin stitching. Contrast front and lower back of legs. Knee pads sold separately GZKP100.
Standards: EN ISO 20471:2013 Class 1
Weight:
270gsm
Fabric:
HV - 85% polyester / 15% cotton, Contrast - 65% polyester / 35%
Sizes:
30 - 46 Regular 31inch & Tall 33inch
Care:
Industrial wash. Special laundering conditions apply for garments with reflective tape Colours shown are available from stock
Range:
63
01 PROTECTIVE WORKWEAR
HIGH VISIBILITY
HI-VIS EXECUTIVE WAISTCOAT Hi Vis executive waistcoat. Front zip fastening. Reflective bands & braces. 2 large front pockets with flaps. Mobile phone pocket with Velcro fastening flap. Pen & pencil pockets. Transparent ID pouch pocket.
TOP: Mobile phone pocket with flap for security.
LEFT: Large front pocket with top entrance and flap for security, side entrance comfort pocket.
Standards: EN ISO 20471:2013 Class 2
Fabric:
100% Polyester
Sizes:
M – 4XL Regular
Care:
Domestic Wash
Range:
Colour shown available from stock
64
www.johnsonsworkwear.com
0800 592 254
TOP: Retro reflective tape is positioned around the body to give 360 0 reflection. BOTTOM: Navy trim and contrast colour, comfort collar and sleeve cuffs.
TWO TONE POLO
Short sleeve. 3 Button placket. Navy trim on collar and sleeve cuffs. Reflective tape.
Standards: EN ISO 20471:2013 Class 2
Fabric:
100% Polyester
Sizes:
M – 4XL Regular
Care:
Domestic Wash
Range:
Colours shown are available from stock
65
01 PROTECTIVE WORKWEAR
HIGH VISIBILITY
HI-VIS POLO
Short sleeve. 3 Button placket. Navy trim on collar and sleeve cuffs.
Standards: EN ISO 20471:2013 Class 2
Fabric:
100% Polyester
Sizes:
M – 4XL Regular
Care:
Domestic Wash
Range:
Colours shown are available from stock
66
www.johnsonsworkwear.com
0800 592 254
GRYZKO ® HI-VIS POLO
3 stud neck fastening. Complete with two band and brace reflective tape.
Standards: EN ISO 20471:2013 Class 2
Weight:
185gsm
Fabric:
55% Cotton / 45% Natura
Sizes:
S - 2XL Regular
Care:
Industrial wash. Special laundering conditions apply for garments with reflective tape
Range:
Colour shown available from stock
67
01 PROTECTIVE WORKWEAR
HIGH VISIBILITY
HI-VIS COVERALL Concealed stud front fastening. Set in sleeves. 2 breast pockets with stud fastening flaps. 2 side swing pockets with access to trousers. Hip and rule pockets. 2 bands of reflective tape around chest, sleeves, legs, and over shoulders. Action back. Self-fabric pocket bags.
Standards: EN ISO 20471:2013 Class 3
TOP: Retro reflective tape is positioned across the chest and over the shoulder to increase reflective vis-ability. LEFT: Breast pocket with stud fastening for security.
GO/RT 3279 Orange Only
Weight:
270gsm
Fabric:
85% Polyester / 15% Cotton
Sizes:
92cm - 140cm Regular & Tall, 8cm increments Industrial wash or dry clean. Special laundering conditions apply for garments with reflective tape. Colours shown are available from stock
RIGHT: Icon guide. A clear view of EN
Care:
certification for which the garment complies.
Range:
68
www.johnsonsworkwear.com
0800 592 254
HI-VIS SWEATSHIRT
Anti-pill fleece fabric. 2 bands of Reflective tape across chest, sleeves and over shoulder.
Standards: EN ISO 20471:2013 Class 3.
RIS-3279-TOM GO/RT 3279 - only Hi Vis Orange
Weight:
280gsm
Fabric:
Anti Pill Fleece Fabric
Sizes:
S - 6XL Regular
Care:
Domestic Wash
Range:
Colours shown are available from stock
69
01 PROTECTIVE WORKWEAR
HIGH VISIBILITY FLAME RETARDANT
GRYZKO ® HI-VIS FR CONTRAST COVERALL
2 bands of FR reflective tape around chest, sleeves and legs. Nordic tape positioning over shoulders. 2 breast pockets with concealed stud fastening flaps. One internal smart phone pocket. Plastic zip front fastening with concealed stud fastening storm flap. 2 external full width adjustable knee pad pockets with Velcro fastening. 2 side swing pockets. 2 cargo pockets. Action back. Side waist elastication. Twin stitching throughout. Contrast front and back yokes, pocket flaps, lower sleeves, lower legs and pocket facings.
Standards: EN ISO 20471:2013 Class 3.
EN ISO 11612:2015 A1 B1 C1 F1. Not suitable for welding
Weight:
300gsm / 365gsm
Fabric:
HV - 50% FR Cotton / 50% polyester. Contrast - 75% FR Cotton / 25%
Sizes:
S - 4XL. Reg 29 inch, Tall 31 inch
Care:
Industrial wash. Special laundering conditions apply for garments with reflective tape
Range:
Colour shown available from stock
70
www.johnsonsworkwear.com
0800 592 254
HI-VIS FR COVERALL Concealed stud front fastening. Set in sleeves. 2 breast pockets with stud fastening flaps. 2 side swing pockets with access to trousers. Hip and rule pockets. 2 bands of reflective tape around chest, sleeves, legs, and over shoulders. Action back. Self-fabric pocket bags.
Standards: EN ISO 20471:2013 Class 3
RIS-3279-TOM GO/RT 3279
EN ISO 11612 :2005 A1 B1 C1 & F1 (not suitable for welding)
Weight:
300gsm
Fabric:
50% FR Cotton / 50% Polyester
Sizes:
92cm - 140cm Regular & Tall 8cm Increments Industrial wash or dry clean. Special laundering conditions apply for garments with reflective tape.
Care:
Range:
Colour shown available from stock
71
01 PROTECTIVE WORKWEAR
HIGH VISIBILITY MULTI PROTECT
HI-VIS MULTI-PROTECT JACKET
Heavy duty zip fastening. Storm flap fastened with plastic studs. Two lower pockets with plastic stud fastening flaps. Detachable hood with adjustable drawstring. Segmented reflective tape to body, sleeves and over shoulders.
Standards: EN ISO 20471:2013 Class 3.
EN ISO 11612:2015 A1, B2, C2.
EN ISO 11611:2015 Class 1 A1, A2.
EN1149-5:2008 EN1149-3:2004.
IEC 61482-2:2009 Class 1 ATPV - 28.0 cal/cm 2 EN343-2003+A1:2007 Class 3/3
Weight:
410gsm
Fabric:
M odacrylic, Cotton, FR Viscose, Polyester, Aramid, Anti-Static
Sizes:
S – 2XL Regular
Care:
Domestic wash at 40 o C. Do not tumble dry
Range:
Colours shown are available from stock
72
www.johnsonsworkwear.com
0800 592 254
HI-VIS MULTI-PROTECT TROUSER Over trouser with fully elasticated waist. No pockets. Segmented reflective tape around lower trouser legs.
Standards: EN ISO 20471:2013 Class 3.
EN ISO 11612:2015 A1, B2, C2.
EN ISO 11611:2015 Class 1 A1, A2.
EN1149-5:2008 EN1149-3:2004.
IEC 61482-2:2009 Class 1 4kA, ATPV =
Weight:
410gsm
Fabric:
Modacrylic, Cotton, FR Viscose,
Sizes:
S – 2XL Regular
Care:
Domestic wash at 40 o C. Do not tumble dry
Range:
Colour shown available from stock
73
01 PROTECTIVE WORKWEAR
HIGH VISIBILITY MULTI PROTECT
Non-metal Flame Retardant Hi-Vis jacket in double weave fabric with comfort finish on the inside, developed for the railway industry. Extended back. Concealed front zip and press stud. Arm ventilation. Chest pockets with flaps. Loop for radio/gas monitor under right chest MULTI PROTECT EDGE JACKET
Standards: N ISO 11612 A1 B1 C1 F1 ,
IEC 61482-2 CL.1 ARC RATING: 8.7cal/cm 2 EN 1149-5, EN 1149-5 : 2008
pocket flap. Side pockets with flaps. Two inside pockets with flaps. Inside mobile phone pocket. Draw cord at the bottom of the jacket. Adjustable cuffs.
EN ISO 11611 CL.2 A1
EN 13034 type PB 6 Special wash instructions apply EN ISO 20471 CL.3
RIS-3279-TOM
Weight:
355g/m2
Fabric:
Edge HVO, 355g/m 2 , EN ISO 11612 D1 E3, LOI: 27.5%
Sizes:
XS- 4XL
Care:
Industrial Wash
Range:
Colour shown available from stock
74
www.johnsonsworkwear.com
0800 592 254
MULTI PROTECT EDGE TROUSER
Non-metal Flame Retardant Hi-Vis trousers in double weave fabric with comfort finish on the inside, developed for the railway industry. Front pockets. Hip pockets with flap. Cargo pockets with flaps. Shaped knees with adjustable inside kneepad pockets.
Standards: EN ISO 11612 A1 B1 C1 F1 ,
IEC 61482-2 CL.1 ARC RATING: 8.7cal/cm2, EN 1149-5,
EN ISO 11611 CL.2 A1,
RIS-3279-TOM
EN ISO 20471 CL.2
Weight:
355g/m2
Fabric:
Edge HVO, 355g/m2, EN ISO 11612 D1 E3, LOI: 27.5%
Sizes:
30-50R, 32-40T, 34-48S
Care:
Industrial Wash
Range:
Colour shown available from stock
75
01 PROTECTIVE WORKWEAR
HIGH VISIBILITY MULTI PROTECT
EDGE COVERALL
Non-metal Flame Retardant Hi-Vis boilersuit in double weave fabric with comfort finish on the inside, developed for the railway industry. Concealed front zip and press stud closing. Arm ventilation. Left chest vertical pocket with zip. Right chest pocket with flap and loop for radio/ gas monitor. Side pockets with flaps and hidden access. Cargo pockets with flaps to legs. Shaped knees with adjustable inside kneepad pockets. Hip pockets with flaps. Adjustable waistband. Adjustable cuffs. Zip in legs from knee to ankle.
Standards: EN ISO 11612 A1 B1 C1 F1 ,
IEC 61482-2 CL.1 ARC RATING: 8.7cal/cm2, EN 1149-5,
EN ISO 11611 CL.2 A1,
EN 13034 type PB 6, Special wash instructions apply EN ISO 20471 CL.3
RIS-3279-TOM
Weight:
355g/m2
Fabric:
Edge HVO, 355g/m2, EN ISO 11612 D1 E3, LOI: 27.5%
Sizes:
S - 5XL, M - 3XL Tall
Care:
Industrial Wash
Range:
Colour shown available from stock
76
www.johnsonsworkwear.com
0800 592 254