MAC Trailer Newsletter - Dec. 2021

MAC Trailer Newsletter - Dec. 2021

We are about to close another successful year and we have each and every one of our dealers and customers to thank for that. Though this year was a vast improvement from the challenges that 2020 presented, 2021 was not to be outdone. We continue to face supply chain constraints, like in most industries, but we will persevere and keep moving forward. As we announced early in 2021, we acquired Beall Manufacturing in Portland, Oregon. We have spent the last year getting to know them and bringing them into the MAC Trailer family with great success. The team out there is doing a wonderful job meeting the MAC Trailer quality standards and providing much needed product in the Western United States and Canada. We are excited to have brought on multiple dealers over this past year, spreading our MAC Trailer brand throughout the nation. We appreciate your continued efforts to learn and grow our brand and we are looking forward to the future!

FROMTHE DESK OF THE SALES DEPARTMENT

Sincerely,

Bill McKenzie President of Sales MAC Trailer Enterprises, Inc.

"....we are looking forward to the future"

03

2022 EVENTS

LOCATIONS MAC TRAILER ENTERPRISES, INC. ALLIANCE, OH 44601 - HEADQUARTERS MAC TRAILER MANUFACTURING, INC. ALLIANCE, OH 44601 - ALUM. & STEEL DUMPS MACWASTE TRAILER, INC. ALLIANCE, OH 44601 - HALF ROUNDS, TRANSFERS, & CHIPPERS MAC MANUFACTURING, INC. SALEM, OH 44460 - PLATFORMS & PNEUMATIC TANKS MAC TRAILER OF OKLAHOMA, INC. DAVIS, OK 73030 - PLATFORMS, HALF ROUNDS, & DUMPS MAC TRAILER TEXAS, INC. HASLET, TX 76052 - PNEUMATIC TANKS & LIQUID TANKS

04

EMPLOYEE HIGHLIGHTS

05

SUPPLIER SPONSORS

06

DEALERWELCOME

07

PRODUCT UPDATES

09

DEALER RESOURCES

10

AFTERMARKET PARTS

11

COMPANY LOCATIONS

12

DEALER NETWORK

13

BEALL MFG

MAC LTT, INC. KENT, OH 44240 - LIQUID TANKS

14

CONTACT INFO

MAC LTT MANUFACTURING, INC. BILLINGS, MT 59101 - LIQUID TANKS MAC LTT STAINLESS DIVISION, INC. MT. PLEASANT, MI 48848 - STAINLESS STEEL LIQUID TANKS BEALL MANUFACTURING, INC. PORTLAND, OR - LIQUID AND PNEUMATIC TANKS

FOLLOWUS ON SOCIAL MEDIA

WPMA FEBRUARY 22-24 Las Vegas, NV

PCFS SEPTEMBER 6-8 San Diego, CA

TMC MARCH 7-10 Orlando, Fl MATS MARCH 24-26 Louisville, KY WASTE EXPO MAY 9-12 Las Vegas, NV

FARM SCIENCE REVIEW SEPTEMBER 20-22 Columbus, OH

NTTC DATES TBD

NTDA OCTOBER 12-14 Colorado Springs, CO

NARA OCTOBER 23-28 Dana Point, CA

Many of you know and have worked with these key members of the MAC Trailer sales team for years. We wanted to take this opportunity to highlight their years of dedication to MAC Trailer as they have hit major milestones in their careers. Join us in congratulating these valued employees

TIMGORMAN Outside Sales Representative 10 YEARS OF DEDICATION

NORMREGGI Outside Sales Representative 15 YEARS OF DEDICATION

DAVID EDWARDS Outside Sales Representative 20 YEARS OF DEDICATION

KEN BUTLER Director of Pneumatic Products 15 YEARS OF DEDICATION

Merry Christmas

- MAC TRAILER ENTERPRISES, INC.

We'd like to thank all of our dealerships and customers for their continued support and continued success in 2021! MAC Trailer is proud to continue to expand our dealer network and would like to introduce to you our newest dealers added in 2021! We wish you all the best in a successful partnership as we head into 2022!

NASH, TEXAS

FAIRFIELD, ILLINOIS

MOBILE, ALABAMA

ALBERTA BRITISH COLUMBIA MANITOBA

NEWREAR ENTRY STEP UP OPTION

The latest convenience and safety improvement for our MAC Trailer flatbeds is the rear entry step up. This simple-to-operate step system has a hinged lid that can be locked in the open or closed position. When the lid is in the open position, it provides a grab handle that can be used as a rail for safe entry up the newly designed MAC steps. This driver-friendly addition to the MAC Trailer lineup of value-added options can be spec'd on all flatbed products.

NEWDESIGNS The MAC Trailer 1000-Cube Pneumatic Trailer is the first to be offered with an open strut design and engineered for weight savings! All Pneumatic models are now available with BTI's latest in lightweight and low maintenance parts. The new BTI Ultra-Light Manhole Assembly saves up to 21 pounds over other standard assemblies. The redesigned lid with a self-aligning lid gasket prevents metal shavings from contaminating your load. Also, the BTI BlackMaxx™ Composite HD Handles are 25% lighter than aluminum, corrosion-resistant, and made in the USA.

Additionally, MAC Vacuum trailers now offer a single inlet that eliminates the need to switch hoses from pressure to vacuum, making the driver's time spent more efficient and operation simple.

IMPROVED TAILGATE DESIGNS

MAC Trailer has made some significant improvements to safety and convenience! The innovative new ground control is now available on aluminum half rounds, MVP, and sheet and post dump trailers. This first-class engineered assembly allows the driver to remain safely on the ground while releasing the pin and opening the door of all side swing tailgates. Additionally, the tailgate and coal door hardware are standard with greaseless bearing blocks and stainless steel handles for reduced maintenance.

All

aluminum

dump

trailers

with

overslung gate assemblies now are fitted with a bronze bearing and a stainless steel pin to prevent corrosion and seizing of the assembly over time. This also includes a Nylatron seal to keep debris from entering the opening of the gate latch. hook and latch

REDUCEDMAINTENANCE AT EVERY TURN MAC Trailer knows the need for uptime and is rolling towards reducing the need for maintenance wherever possible. The high-tensile galvanized steel subframe now has bolted on spring and equalizer hangers. Also they have switched to a Nylatron bushing in the hardware bar bearing blocks and galvanized hardware bar to ensure ease of maintenance and simplify the serviceability of the trailer.

Also, now standard on all spring suspensions is the single bolt equalizer with a mechanical lock nut and pressed in bushing. This is an improved design over the past tapered bushing and double bolt design.

MAC Trailer Dealer Locator Warranty Registration Form Access link to MAC Trailer Website Contact Us form Social Media Links GENERAL PUBLIC ACCESS FEATURES: MAC Trailer has an app that is available to anyone from customers to dealers with specialized dealer access. If you don't already have this app, download it free TODAY!

A new tab has been added to the website to create a central location where you can email MACSoc support, download the MAC App, and fill out trailer warranty cards. This tab can be found under the Dealer tab at https://www.mactrailer.com/dealer- services.html Open your MACSoc account Select the trailer type you'd like to view by clicking on the image one time. Then right-click the trailer image and click the manual button that appears. The manual will open through FlippingBook, a secure software program that allows our dealers to view the training information. This information can not be downloaded, printed, or shared to ensure confidentiality is maintained. PASSWORD REQUIRED! Email marketing at [email protected] for the password All dealer training manuals are now stored in your MACSoc account. This ensures dealers have access to the trailer types they are authorized to sell, the content is always up to date, and the information is secure. TO ACCESS THE MANUALS:

View dealer stock trailers View schedules DEALER ACCESS FEATURES:

Open trailer specifications Read public announcements Regional rep. contact information Link to MACSoc user guide

To be granted dealer access, please use your MACSoc user credentials. If your login does not work or if you do not have MACSoc access currently, please contact [email protected]

USE PHONE CAMERA TO SCAN CODE https://qrco.de/MACTrailerAppStore

Available for both iPhone and Android

MAC TRAILER’S GOTWHAT YOU NEED!

The newly updated MAC Trailer Aftermarket Parts website has been modified to benefit our MAC Trailer Dealer Network. Features will include dealer list pricing, quantity discounts, and the ability to upload purchase orders into the system for online parts ordering. Additionally, the new website provides the option to order MAC Trailer merchandise and apparel directly, with a wide variety of size and style options available. Modifications will continue to be made in 2022 to better serve our Dealer Network. VISIT HTTPS://AFTERMARKET.MACTRAILER.COM/ TO LEARNMORE!

Special orders or need parts for another make trailer? NO Problem! We have you covered! Simply call us at 1-800-647-9424 Fax : 330-823-6883 | Email: [email protected] Web : https://www.mactrailer.com/aftermarket-parts-dept.html

Hours: Monday - Friday 8 am - 5 pm Saturday 8 am - 12 pm 12241 Rockhill Ave NE, Alliance, Ohio 44601

USE PHONE TO SCAN CODE

MANUFACTURING LOCATIONS

A NETWORK TO BE PROUD OF

PORTLAND, OREGON

A NEWLY ACQUIREDMAC TRAILER COMPANY

For over 100 years, Beall has earned a reputation for delivering high-performance designs and exceptional craftsmanship. Beall has fleet-proven, lightweight, and durable tank designs, ideal for the Western United States and Canada !

ALUMINUM PETROLEUM TANK TRAILERS Visit us at - https://beallmfg.com/ Email us at - [email protected]

ALUMINUM DRY BULK TANK TRAILERS

https://beallmfg.com/aluminum-petroleum-semi-trailers

https://beallmfg.com/aluminum-dry-bulk

WA | OR | ID

CA | NV | UT | AZ

Issue 2021/2022