Nilkamal Cold Storage System

Nilkamal Cold Storage System

Cold Storage System

www.nilkamalmaterialhandling.com

WHY USE A NILKAMAL COLD STORAGE SYSTEM The material handling division of Nilkamal Limited specializes in the design and implementation of material handling system integration and solutions. We are a "One Stop Shop" and offer a Insulated chamber with continuous line PUF Insulated Panel Tongue & Groove type. successfully running Over 1000+ installations across India. 5MT to 50 MT each chamber capacity. A solution for everyone’s capacity.

Faster Installation 1000+ successfully running installations PAN India.

A solution for everyone’s capacity.

Conforming to FDA Standard

5MT to 50MT each chamber capacity.

Pan India with 24x7 Sales support

Customized Solution

The Domain Expertise of Cold Storage System extends across a wide spectrum of industries that include:

Agro Industries & Horticulture

Hotels & Restaurants

Meat Processing

Logistic

Dairy Food Processing

Pharmaceuticals

Ripening Chambers

E-commerce

Dry Fruit

Ice Cream

Sea Food

Panel Thickness 60mm 80mm

Temperature Range 2 0 C to 8 0 C

-50 C to -10 0 C -10 0 C to -18 0 C -18 0 C to -28 0 C -28 0C to -350 C

100mm 125mm 150mm

Panel density 40kg/mtr cube

EVAPORATING UNIT

Salient Features of Refrigeration Evaporator Units

- Superior quality cooling coil.

- Proper sizing for efficient cooling.

- Proper fin spacing.

- Imported IG-CU pipes with proper joining and brazing system.

- Fans with required CFM, premium and safety – inbuilt features.

CONDENSING UNIT

Features

- Proper sizing of condensing units

- Proper fin spacing, airflow, CFM, cooling to the compressor are the principle features of the Polfrost Condensing units.

- Superior quality in-house sheet metal from GI sheets and powder coated components.

- Service valves, accumulators, liquid receivers, suction accumulators, driers and oil separators if required, form the main parts of the condensing units.

- Safety & electrical protections, sophisticated wiring are the primary features of the condensing units.

CONTROL PANEL

For Temp. Controller Features

- Digital input for Pressure Cutout.

- Relay output : Compressor + Heater + Evap. Fan.

- HP/LP/OSS trip protection for compressor.

- Compressor protection algorithm.

- Auto/Man defrosting facility (Time/ Temp based).

TECHNICAL DETAILS

60, 80, 100, 125 & 150 mm

1 2

Thickness

GI Pre-Painted Sheet, GI Plain Sheet, Plain Galvanize Iron. (Inside & Outside different metal can be placed as per your requirement) (A) For Kota stone or Concrete floor, Puf Slab with both side tar felt coated. (B) For Kota stone or Concrete floor, both side metal surface panel in which each

Surface Material

3

Floor

side fits with lock and prevent temperature loss. (C) Aluminium Checkered Plate with Marine Ply.

Door

Offset Type Swing Door , Imported Hardware, Push Type Gasket & replaceable heater for easy door operation & long life Opening Size: 1000 x 2000, 1200 x 2200, 1500 x 3000, 1800 x 3000

4

Room Size

(A) Length & Width Minimum 1.5 mt and Bigger size 0.5 mt in multiples. As per requirement (B) Standard Height for 60 mm thickness 2.44 mt, 80 mm-2.44 mt, 100 mm-2.44 mt, 125 mm-2.44 mt, 150 mm-2.44 mt. Single Panel Height upto 12 mt and above as per your requirement.

5

6

Tempreture requirement as per product

Butter Vegetables Pharma Product Sweet

2 0 C to 8 0 C

Milk Fruit flower

0 0 C to 4 0 C

Cheese Frozen Fish Meat Ice Cream

-18 0 C -18 0 C to -29 0 C -20 0 C -20 0 C to -22 0 C

Head Office: Nilkamal Limited Nilkamal House, Plot No.77 & 78, Street No.14, M.I.D.C, Andheri (East), Mumbai - 400093

Toll Free Number: 1800 890 9115 Email: [email protected]

www.nilkamalmaterialhandling.com