ORO2U Road Catalogue - Section D - Service and Control.

ORO2U Road Catalogue - Section D - Service and Control.

Section D

Index

ABS Wheel Bearing Kits

D150-151

Bearings

D152

Brake Hoses Brake Pedals Cable Clamps

D70

D173

D71 D43 D72

Cable Kits

Cable Maintenance

Cable Making Materials

D73-74

Cable Racks Clean Grips

D43

D12 Clutch Master Cylinder Rebuild Kits D40b Clutch Slave Cylinder Rebuild Kits D40a Control Cable Kits D43 Control Cables D42-70 Donuts D12 Easy Clutch D40 Foam Skins D40 Foot Peg Adaptors D182-183 Foot Pegs D179-184 Fork Bushings D107 Fork Bushing Repair Kits D108-111 Fork & Dust Seals Kits D78-105 Fork Seals D75-77 Fork Sliders D106 Ktech Fork Guide Bushes D112-119 Ktech Fork Slide Bushes D119a- 119j Gear Levers D174-175 Grip Accessories D12 Grip Wire & Glue D13 Handlebar Bar Ends D7-8 Handlebar Grips D9-11 Handlebars D1-6 Head Race Bearing Kits D157-172 Heated Grips D11 Inner Primary Bearings D153-156 Kickstart Rubbers D178 Kickstarts D176-177 Lever Adjusters D22 Lever Covers D40 Lever Perches D22 Lever, Cable & Grip Accessories D40 Levers D23-39 Lock Spray D13 Mud Scraper Kits D106 Push/Pull Throttles D14 Safety Wire Pliers D13 Shifterskins D175 Shock Bushes D128 Shock Spring Compressor D129 Shock Tools D129 Shocks D120-128 Single Pull Throttles D15 Speedo Cables D42 Speedos D41 Steering Damper D115 Swingarm Bearing & Seal Kits D130-132 Tachometers D41 Terminator Cables D70 Throttle Kits D18-20 Throttle Switches D21 Throttle Tubes D16-17 Throttles D14-21 Wheel Bearing & Seal Kits D133-152

www.oro2u.com

Tel: 01597 822 666

Fax: 01597 825 224

Handlebars

FIR Steel Bars

FIR Steel Handlebars

Technology: Tig welded X-bar and CNC precision bends, finished in a super-tough durable epoxy powder. Features: Constructed from thick steel carbon tube for high strength. Plastic end caps prevent bars from cutting through grips. 7/8” (22.2mm). Weight 2-2.6lbs. Made in UK (TAG-Z).

16-2810

FIR Road Steel Bars 7/8” (22mm) FIR Road ultra low handlebar. 7/8” Superbike Sports Universal. Designed with no crossbar for instruments. Emulates the 758-01 bend. Plastic end caps. Colours; Black, Blue, Green, Red Ultra Low Bar 16-2810

FIR Road Steel Bars 7/8” (22mm) FIR Road low handlebar. 7/8” Superbike Sports Universal. Designed with no crossbar for instruments. Emulates the 754-01 bend. Plastic end caps. Colours; Black, Blue, Green, Red Low Bar 16-2811

16-2811

FIR Road Steel Bars 7/8” (22mm) FIR Road medium handlebar. 7/8” Superbike Sports Universal. Designed with no crossbar for instruments. Emulates the 755-01 bend. Plastic end caps. Colours; Black, Blue, Green, Red Medium Bar 16-2812

16-2812

FIR Road Steel Bars 7/8” (22mm) FIR Road medium handlebar. 7/8” Superbike Sports Universal. Designed with no crossbar for instruments. Emulates the 756-01 bend. Plastic end caps. Colours; Black, Blue, Green, Red High Low Bar 16-2813

16-2813

FIR Road Steel Bars 7/8” (22mm) FIR Street-Fighter handlebar. 7/8” Superbike Sports Universal. Designed with no crossbar for instruments. Emulates the 789-02 bend. Plastic end caps. Colours; Black, Blue, Green, Red Street-Fighter Bar 16-2814

16-2814

FIR Road Steel Bars 7/8” (22mm) FIR Wide Low handlebar. 7/8” Street Sports Universal. Designed with no crossbar for instruments. Emulates the 749-02 bend. Plastic end caps. Colours; Black, Blue, Green, Red Wide Low Bar 16-2815

16-2815

Optional: 2mm / 2.5mm / 3.0mm thick steel Optional Features: Huge variety of bends (MX, Mini MX, Dirt, Road/Street and ATV bends). Available in 7/8” (22.2mm) and 1” (25.4mm). Optional Finish: Super-tough epoxy powder coated. Deep chrome plate. Range of colours; Black, Blue, Red, Orange, Green, Chrome. Available with or without crossbar pad.

*Please visit our website for current prices D1

E-mail: [email protected]

www.oro2u.com

Handlebars

FIR Steel Bars

FIR Steel Handlebars

Technology: Tig welded X-bar and CNC precision bends, finished in a super-tough durable epoxy powder. Features: Constructed from thick steel carbon tube for high strength. Plastic end caps prevent bars from cutting through grips. 7/8” (22.2mm). Weight 2-2.6lbs. Made in UK (TAG-Z).

FIR Road Steel Bars 7/8” (22mm) FIR Ace Cafe Racer, 7/8” Universal Handlebar. Designed with no crossbar for instruments. Emulates the DCC Originals (B01DJTDQX6) and 13025 DCC-SBar78 bend. Plastic end caps.

16-2818

Colours; Black Ace Racer Bar

16-2818

FIR Road Steel Bars 7/8” (22mm) FIR Flat Drag handlebars. 7/8” Super bike Universal Handlebar. Designed with no crossbar for instruments. Emulates the 658-02 bend. Plastic end caps. Colours; Black, Blue, Green, Red Flat Drag Bar 16-2816

FIR Road Steel Bars 7/8” (22mm) FIR Bobber handlebar. 7/8” Street Sports Universal Handlebar. Designed with no crossbar for instruments. Emulates the CML405128 bend. (Honda, Suzuki, Yamaha) Plastic end caps. Colours; Black, Blue, Green, Red Bobber Bar 16-2819

16-2816

16-2819

FIR Road Steel Bars 7/8” (22mm) FIR Clubman Style 7/8” Handlebars. Designed with no crossbar for instruments. Emulates the B004PQ0T8Y bend. Plastic end caps.

Colours; Black Clubman Bar

16-2820

16-2820

FIR Road Steel Bars 7/8” (22mm) FIR ClubmanStyle 7/8” Handlebars. Designed with no crossbar for instruments. Emulates the B004PQ0T8Y bend. Plastic end caps.

Colours; Black Clubman Bar

16-2821

16-2821

FIR Classic Road Steel Bars 7/8” (22mm) FIR Royal Enfield Classic, 7/8” Handlebar. Designed with no crossbar for instruments. Emulates the Royal Enfield bend. Can be used as a cafe racer bar, Plastic end caps. Colours; Black, Chrome Royal Enfield Bar 16-2822

16-2822

Optional: 2mm / 2.5mm / 3.0mm thick steel Optional Features: Huge variety of bends (MX, Mini MX, Dirt, Road/Street and ATV bends). Available in 7/8” (22.2mm) and 1” (25.4mm). Optional Finish: Super-tough epoxy powder coated. Deep chrome plate. Range of colours; Black, Blue, Red, Orange, Green, Chrome. Available with or without crossbar pad.

*Please visit our website for current prices

D2

www.oro2u.com

Tel: 01597 822 666

Fax: 01597 825 224

Handlebars

FIR Steel Bars

FIR Steel Handlebars

Technology: Tig welded X-bar and CNC precision bends, finished in a super-tough durable epoxy powder. Features: Constructed from thick steel carbon tube for high strength. Plastic end caps prevent bars from cutting through grips. 7/8” (22.2mm). Weight 2-2.6lbs. Made in UK (TAG-Z).

FIR Classic Road Bars 7/8” (22mm) FIR Sweeping Classic Universal Bar. Designed with no crossbar for instruments. Can be used as a cafe racer bar. Custom bend.

16-2823

Colours; Black, Chrome Sweeping Classic Bar

16-2823

FIR Road Steel Bars 7/8” (22mm) FIR Retro Cool Classic Bar. Designed with no crossbar for instruments. Can be used as a cafe racer bar. Custom bend. Colours; Black, Chrome Retro Cool Bar 16-2824

16-2824

FIR Road Steel Bars 7/8” (22mm) FIR Old Style Classic Bar. Designed with no crossbar for instruments. Custom bend, can be used as a cafe racer bar.

Colours; Black, Chrome Old Style Classic Bar

16-2825

16-2825

FIR Road Steel Bars 7/8” (22mm) FIR Broomstick bar 7/8”. Straight lengths 700/750/800mm Colours; Black Broomstick Bar 16-2830

16-2830

FIR Road Steel Bars 1” FIR Broomstick bar 1”. Straight lengths 700/750/800mm Colours; Black Broomstick Bar 16-2831

*Please visit our website for current prices

E-mail: [email protected]

www.oro2u.com

D3

Handlebars

FIR Steel Bars

ATV Bars Honda ATV Honda ATV Kawasaki ATV

A B C D E F

Part No.

Cross Ref

OEM 53100-HP5-600 770 245 185 150 85 240 1

No No No No

16-2800 16-289

TRX300 Style

775 175 105 145 95 235 1 720 175 110 135 80 190 1 775 140 115 130 80 190 1

Kawasaki Models Suzuki LT Models

No No

Yes 16-302 Yes 16-300

Suzuki ATV ATV 7 1/4"

Yamaha YFM350/450 800 185 140 150 110 195 1

No No

16-288

ATV 6"

Yamaha YFZ450R

775 155 105 145 60 215 1 780 160 115 130 90 210 6

No No

Yes 16-291 Yes 16-2904

Raptor 700R ATV

REN 811-01

MX Bars Honda CR

Cross Ref REN 773-01 REN 672 -01

A B C D E F

Part No.

795 95 50 150 55 210 3 800 100 60 115 50 205 6 740 110 80 130 60 180 2

No No No

Yes 16-293 Yes 16-2900 Yes 16-297

KTM 7/8'' Bars School Boy Bar

60/65/80/85/100cc

MX Classic

23-92400

819 177 114 114

-

101 1 Yes Yes 16-284

Enduro Bars

Cross Ref REN 613-01

A B C D E F

Part No.

High Enduro

820 135 90 180 70 210 6 Yes Yes 16-299

Trials & Classic Bars Cross Ref

A B C D E F

Part No.

Trials Universal

Trials Universal

810 110 85 120 50 225 1 805 115 80 120 42 215 6 810 125 90 120 45 215 6

No No No

Yes 16-294 Yes 16-2902 Yes 16-2901

Trials 5.5''

REN 735-01 REN 768-02

Trials 6''

Classic Bend 6.5"

Classic Bend 6.5"

840 150 100 170 75 200 6 Yes Yes 16-295

Royal Enfield Classic 7/8” Sweeping Classic 7/8” Retro Cool Classic 7/8” Old Style Classic 7/8”

700 - 10 700 - 40

40 130 165 215 2 Yes 45 130 200 240 2 Yes

No No No No No No No No No No No No

16-2822 16-2823 16-2824 16-2825 16-285

740 30 80 140 200 220 2 Yes 680 65 115 135 210 220 2 Yes 880 150 100 130 130 255 2 Yes

Classic Cruiser 7/8”

Road/Street Bars

Cross Ref REN 758-01 REN 754-01 REN 755-01 REN 756-01 REN 749-02 REN 789-02 REN 658-02

A B C D E F

Part No.

Road Ultra Low

750 75 45 120 95 230 4 Yes 750 110 65 130 125 240 4 Yes 750 120 80 130 120 220 4 Yes 750 115 100 130 115 200 4 Yes 800 40 50 150 75 210 4 Yes 770 100 55 130 75 200 4 Yes 730 0 0 215 60 230 4 Yes

16-2810 16-2811 16-2812 16-2813 16-2815 16-2814 16-2816 16-2818 16-2819 16-2820 16-2821

Road Low

Road Medium

Road High

Road Wide Low

Streetfighter

Flat Drag

Ace Cafe Racer

DCC-SBAR78-GBPC 560 0 70 110 40 190 1 Yes No

Bobber

CML405128

815 55 45 160 65 225 4 Yes 730 100 100 240 135 235 1 Yes 730 100 100 240 135 235 1 Yes

No No No

Clubman Bend Clubman Angle

B 5697028439551 A 5697028439551

Broomstick Bar 7/8” (Straight bar in 700 / 750 / 800mm lengths) Broomstick Bar 1” (Straight bar in 700 / 750 / 800mm lengths)

-

-

-

-

-

-

1

No No

16-2830

-

-

-

-

-

-

1

No No

16-2831

* Note: Size in mm (+/- 3mm) *

*Please visit our website for current prices D4

www.oro2u.com

Tel: 01597 822 666

Fax: 01597 825 224

Handlebars

Steel Bars

Steel Chrome Handlebars

High quality deep chrome steel handlebars with high strength carbon tube. A variety of classic shapes available. 22.2 mm (7/8”) outer handlebar tube diameter, inside diameter 18mm (0.71”). Designed with fluid bends at precise angles for maximum comfort and control. Fits motorcycles from 50cc to 1800cc, custom classics to superbikes. Fits to OEM stock headstock clamps. Can be drilled for wires or mounting parts.

Medium Apehanger Steel Chrome Handlebar Length 89cm x Bend 24 cm x Height 30 cm (Dia 22mm)

High Apehanger Steel Chrome Handlebar Length 90cm x Bend 22 cm x Height 43 cm (Dia 22mm)

Description

Part No.

Description

Part No.

Medium Apehanger Steel Chrome Handlebar

16-264.CH

High Apehanger Steel Chrome Handlebar

16-265.CH

Hanger Steel Chrome Handlebar Length 80cm x Bend 17 cm x Height 20 cm (Dia 22mm)

Hanger Steel Chrome Handlebar Length 82cm x Bend 22 cm x Height 27 cm (Dia 22mm)

Description

Part No.

Description

Part No.

Hanger Steel Chrome Handlebar

16-262.CH

Hanger Steel Chrome Handlebar

16-263.CH

Universal Street Steel Chrome Handlebar Length 80cm x Bend 17 cm x Height 20 cm (Dia 22mm)

Cow Horn Steel Chrome Handlebar Length 86cm x Bend 22 cm x Height 18 cm (Dia 22mm)

Description

Part No.

Description

Part No.

Universal Street Steel Chrome Handlebar

16-260.CH

Cow Horn Steel Chrome Handlebar

16-261.CH

Universal Street Steel Chrome Handlebar Length 86.4 cm x Bend 10.8 cm x Height 20.3 cm (Dia 22mm)

Flat Steel Chrome Handlebar Length 86cm x Bend 22 cm x Height 18 cm (Dia 22mm)

Description

Part No.

Description Handlebar Handlebar Handlebar

Part No.

Universal Street Steel Chrome Handlebar

16-285

Length 68 cm x Height 5 cm Length 74 cm x Height 8 cm Length 74 cm x Height 7 cm

16-266.CH 16-267.CH 16-268.CH

A = Length, B = Bend, C = Height

Description

A

B

C

Diameter

Part No.

Cow Horn Chrome Steel Handlebars Hanger Chrome Steel Handlebars

86 cm (33.85”) 82 cm (32.28”) 89 cm (35.04”) 90 cm (35.43”) 80 cm (31.49”) 90 cm (35.43”) 68 cm (26.77”) 74 cm (29.13”) 74 cm (29.13”)

22 cm (8.66”) 22 cm (8.66”) 22 cm (8.66”) 22 cm (8.66”) 17 cm (6.69”) 32cm (12.60”)

18 cm (7.08”) 27 cm (10.63”) 43 cm (16.93”) 43 cm (16.93”) 20 cm (7.87”) 14 cm (5.51”) 5 cm ( 1.97”) 7 cm (2.75”)

22.2 mm (7/8”) 22.2 mm (7/8”) 22.2 mm (7/8”) 22.2 mm (7/8”) 22.2 mm (7/8”) 22.2 mm (7/8”) 22.2 mm (7/8”) 22.2 mm (7/8”) 22.2 mm (7/8”)

16-261.CH 16-263.CH 16-264.CH 16-265.CH 16-262.CH 12-260.CH 12-266.CH 12-268.CH 12-267.CH

Medium Apehanger Chrome Steel Handlebars High Apehanger Chrome Steel Handlebars

Hanger Chrome Steel Handlebars

Unviersal Street Chrome Steel Handlebars

Flat Chrome Steel Handlebars Flat Chrome Steel Handlebars Flat Chrome Steel Handlebars

- - -

8 cm (3.15”)

*Please visit our website for current prices

E-mail: [email protected]

www.oro2u.com

D5

Handlebars

Alloy

Low Pro Series Alloy Ultima Aluminium Handlebar Length 71.2 cm x Bend 9.1 cm x Height 8.5 cm (Dia 22.2mm). Clamp gap 15 cm, 12 mm inner bore, -5 mm Tube. Available in Black, Silver, Blue, Gold or Red.

Sportsbike Cafe Racer Alloy Ultima Aluminium Handlebar Length 70 cm x Bend 5.5 cm x Height 0 cm (Dia 22.2mm) Clamp gap 23 cm, 14mm inner bore, -6 mm Tube. Available in Black or Silver

Description

Part No.

Description

Part No.

Handlebar - Black, Blue, Gold, Silver or Red

16-240

Handlebar - Black or Silver

16-242

Sportsbike Medium Alloy Ultima Aluminium Handlebar Length 74.6 cm x Bend 10 cm x Height 11.5 cm (Dia 22.2mm). Clamp gap 15.8 cm, 12 mm inner bore, -5mm Tube. Available in Black, Silver, Blue, Gold or Red.

Description

Part No.

Handlebar - Black, Blue, Gold, Silver or Red (Sold Each)

16-261.CH

A = Length, B = Bend, C = Height

Description

A

B

C

Diameter

Part No.

71.2 cm 74.6 cm

9.1 cm 10 cm 5.5 cm

8.5 cm 11.5 cm

22.2 mm (7/8) 22.2 mm (7/8) 22.2 mm (7/8)

16-240 16-241 16-242

Sportsbike Aluminium Low Handlebars Sportsbike Aluminium Medium Handlebars Sportsbike Aluminium Cafe Racer Handlebars

70 cm

N/A

*Please visit our website for current prices

www.oro2u.com

Tel: 01597 822 666

Fax: 01597 825 224

D6

Bar Ends

Handlebars

Alloy Ultima Billet CNC Bar Ends Alloy Ultima T6 Aluminium Billet Bar Ends.

CNC machined. Most alloy bars are 14mm, and Pro Taper type bars are 12mm. Helps reduce the vibration through the bars and stop the bars from punching a hole through your grips if dropped. Sold in pairs. Available in 3 sizes; 12, 14 and 18mm.

Available in 5 colours; Blue, Gold, Red, Silver and Titanium. *Please note not all sizes are available in all colours.

Alloy Ultima Biller CNC Bar Ends Description Fits most Twin Wall, Taper and Fat Bars

12-0112

Size

Part No.

12mm 12-0112

Fits most Aluminium Bars

14mm 12-0114

Fits Steel Bars

18mm 12-0118

12-0114

12-0114 Working

LED Bar Ends They mount into the ends of your handlebars featuring bright amber LEDs to bring more attention to your bike. The wiring allows them to perform in conjunction with your indicators. Each kit includes; • Pair of LED handlebar end marker lights • Allen wrench • Extra bullet wire terminals and covers (5 male, 5 female) • 45 in. of steel wire • Installation instructions Specifications: head diameter 1 1/16 in., length of head 1 1/8 in., overall length 1 1/16 in. Min Input: 8V/0.10A, Max Output: 15V/0.05S. Used with 7/8” bars.

Colours; Black or Silver LED Bar Ends - Black LED Bar Ends - Silver

44-9700.BK 44-9700.SI

44-9700.BK

44-9700.SI

Universal Steering Damper (FIR) • Steering damper with reservoir - adjustable. • Overall length 370mm • Maximum adjustable length 330mm from eye to eye of rose joints, body length 200mm Helps keep the bike tracking straight over difficult terrain such as ruts, rocks and sand, and also smooths out jolts through the handlebars at the end of jumps. They also reduce arm fatigue on longer rides by reducing the amount of effort needed to control the handlebars. FIR Universal Steering Damper (Black) 29-5981

29-5981

*Please visit our website for current prices

E-mail: [email protected]

www.oro2u.com

D7

Bar Ends

Handlebars

6mm Ultima Alloy Billet Bar Ends For OEM Handlebars Available in Silver, Blue, Red and Black Sold in sets of two

suzuki Models

HOnda Models

Years

Part No.

Years

Part No.

GSX600F

1998 - 08 12-0162.SI 1995 - 05 12-0162.SI 1996 - 00 12-0162.SI 2005 - 13 12-0162.SI 1999 - 09 12-0162.SI 1998 - 03 12-0162.SI 1998 - 07 12-0162.SI 1990 - 00 12-0162.SI 2003 - 09 12-0162.SI 1998 - 03 12-0162.SI 1997 - 01 12-0162.SI 1989 - 98 12-0162.SI 1988 - 95 12-0162.SI 1996 - 06 12-0162.SI 1998 - 01 12-0162.SI

CBF500 CBF600

2004 - 07 12-0160 2004 - 13 12-0160 1987 - 13 12-0160 2003 - 12 12-0160 1998 - 13 12-0160 1998 - 13 12-0160 1992 - 04 12-0160 2002 - 08 12-0160 2004 - 13 12-0160 2000 - 04 12-0160

GSF600 Bandit

GSX-R600

CBR600F CBR600RR

GSF650 Bandit

SV650N, S

CB600F Hornet

GSX750 Inazuma

12-0160

VFR800FI CBR900RR

GSX750F GSX-R750 SV1000N, S

CB900F Hornet

CBR1000RR

TL1000R TL1000S

VTR1000 SP1, SP2

VTR1000F 1997 - 04 12-0160 CBR11000XX Blackbird 1997 - 08 12-0160 CB1100 X11 1999 - 00 12-0160 CB1300F 2003 - 10 12-0160

GSX-R1100 GSX1100F

GSF1200 N, S Bandit GSX1200 Inazuma

kawasaki Models Years Part No. ZX6R, ZX636, ZX6RR 1995 - 12 12-0161.SI ZZR600 1990 - 05 12-0161.SI ER6 N, F 2009 - 13 12-0161.SI Z750,S,R 2004 - 12 12-0161.SI ZR750 Zephyr 1991 - 00 12-0161.SI ZXR750R 1991 - 95 12-0161.SI ZX9-R 1994 - 03 12-0161.SI Z1000 2003 - 09 12-0161.SI GPZ11000 1995 - 97 12-0161.SI ZR1100 Zephyr 1992 - 97 12-0161.SI ZRX1100 1997 - 00 12-0161.SI ZZR1100 1990 - 01 12-0161.SI ZRX1200, R, S 2000 - 06 12-0161.SI

12-0161

yamaha Models

Years

Part No.

TZR125R TDR125 FZR600

1993 - 00 12-0163.SI 1993 - 03 12-0163.SI 1989 - 95 12-0163.SI 1992 - 03 12-0164.SI 1996 - 03 12-0163.SI 2006 - 13 12-0164.SI 1998 - 03 12-0164.SI 2004 - 12 12-0163.SI 1993 - 01 12-0163.SI 1991 - 02 12-0163.SI 2001 - 13 12-0163.SI 1995 - 03 12-0163.SI

XJ600N, S Diversion YZF600R Thundercat

YZF-R6

FZS600 zer

FZ6, zer YZF750R TDM850 TDM900

12-0162

XJ900S Diversion

FZS1000 zer

-

12-0163.SI

FZ1, zer YZF-R1

2004 - 12 12-0163.SI 1998 - 13 12-0164.SI

FZR1000 Exup 1989 - 95 12-0163.SI YZF1000R Thunderace 1996 - 03 12-0163.SI XJR1200, SP 1995 - 98 12-0163.SI XJR1300, SP 1999 - 13 12-0163.SI FJR1300 2001 - 13 12-0164.SI MT-01 2005 - 13 12-0163.SI

12-0163

12-0164

*Please visit our website for current prices D8

www.oro2u.com

Tel: 01597 822 666

Fax: 01597 825 224

Handlebars

Grips

Light Grey Soft Compound • Full diamond design • Feature synthetic rubber compounds specially formulated to achieve the optimum combination of strength, tackiness and shock absorption • Dimensions 9.8 x 2.9 x 2.9 inches Part No. 48-053.G147

48-053.G147

Medium Grey Medium Compound • Full diamond design • Feature synthetic rubber compounds specially formulated to achieve the optimum combination of strength, tackiness and shock absorption • The medium compound is a compromise between the firm and soft compounds • Dimensions 9.8 x 2.9 x 2.9 Inches Part No. 48-054.G148

48-054.G148

Dark Grey Firm Compound • Full diamond design • Feature synthetic rubber compounds specially formulated to achieve the optimum combination of strength, tackiness and shock absorption • The firm grip has the same feel as a stock grip, it is very strong and has very good

48-055.G149

resistance to tearing and abrasion • Dimensions 9.8 x 2.9 x 2.9 Inches Part No. 48-055.G149

Dual Layer Road Race Grips • All diamond, soft dual compound • Renthal dual compound grips with DuPont Kevlar brand resinare softer, tackier and longer lasting • As used by many of the top professional racers around the world • Available in 29 or 32mm • Sold in pairs Part No. 48-056.G174 (29mm) Part No. 48-057.G176 (32mm)

Kelvar Road Grips 29/32mm • All diamond, soft dual compound • Softest, tackiest and longest-lasting Renthal grips ever • Feature Kevlar-reinforced fibers • Last three times longer than regular soft grips Half-waffle design in natural color • Feature a smaller inner flange and a pre-cut hole in the end to for bar ends

• Fits 7/8” bars with twist throttle • Available in natural 29 or 32mm • Sold in pairs Part No. 48-058.G175 (29mm) Part No. 48-058.G177 (32mm)

48-056 / 48-057

48-058

Renthal Grip Glue Recommended for use on Renthal Grips, or any other type of standard grip where adhesive is required. Renthal Grip Glue 25ml 48-101.REN

Renthal Quick Bond Grip Glue A highly developed grip glue, specially formulated to give a secure bond without damaging the grip. Renthal quick bond grip glue is a fast acting liquid adhesive, chemically engineered to bond in just 3 minutes. Renthal Quick Bond Grip Glue 25ml 48-102

48-101.REN

48-102

*Please visit our website for current prices

E-mail: [email protected]

www.oro2u.com

D9

Handlebars

Grips

Grips • Diameter 22/24 • 128mm long

Grips • Diameter 22/24 • 128mm long • Comes complete with end caps • Available in: Black, Blue/Black, Red/Black, Silver/ Black,Gold/Black Part No. 12-383.BK (Black/Black) Part No. 12-383.BE (Blue/Black) Part No. 12-383.GD (Gold/Black) Part No. 12-383.RD (Red/Black) Part No. 12-383.SI (Silver/Black)

• Comes complete with end caps • Available in: Black, White or Gold Part No. 12-382.BK (Black) Part No. 12-382.GD (Gold) Part No. 12-382.WE (White)

Classic Grips • Classic plastic grips • Open ends • Diameter 22/24 • Length 128mm • Available in: Black Part No. 12-381

Grips • Diameter 22/24 • Length 128mm • With end caps • Available in: Black Part No. 12-380

Domino Street The MotoGP grip is designed purely for road race competition. This unique grip is a 2-color, dual compound system. The inner grip is a firm compound, while the outer is soft. Together, they provide a soft feel at the palm with a progressive firmness, not a soft spongy feel common on many grips. • This grip has been proven on some of the fastest MotoGP teams • Available in: Black/Red or Black/Grey • Made in Italy Part No. 12-4203

Domino XM2 Street The inner grip is a firm compound, which allows a soft feel at the palm with a progressive firmness, not a soft spongy feel common on many grips.

• Available in: Black/Red or Black/Grey • Made in Italy Part No. 12-4204

Motion Pro Road Control Grips Ergonomic design with medium density TPR compound provides excellent feedback and control without sacrificing durability. • Full diamond pattern for unparalleled feel in both the wet and dry • Fits 7/8 bars and throttle sleeves • Available in: Black Part No. 12-410

*Please visit our website for current prices

D10

www.oro2u.com

Tel: 01597 822 666

Fax: 01597 825 224

Handlebars

Grips

Domino / Tommaselli Trials Replica Domino / Tommaselli trials grips - Classic Style • Soft compound rubber gives durability and the feel you need for the trials riding • Trials Handlebar Grips Ossa Montesa Cota Bultaco Sherpa • High flange for maximum control while riding • For use with 7/8 in. bars and twist throttles • Grip designed to reduce vibration, arm pump and fatigue • Available in: black Part No. 12-391

Street Style Grip Street Motorcycle Grips Classic Style. • Universal fitting for STD bars / throttle [22.2/25.1mm] [7/8” / 1”] • Made to last and give very good grip in all conditions • Excellent control and comfort for all motorcycle riders • Rubber [TPR] compound, very long lasting and hard wearing • Minimum diameter for gripping power • Grip length overall 120mm • Dual Wall grip with an inner-ribbed air chamer for soft feel • Available in: black Part No. 12-3932.BK.FIR

Street Style Grip Good for restoring that old classic or and affordable replacement for your everyday bike. Street Motorcycle Grips Classic Style. • Universal fitting for STD bars / throttle. [22.2/25.1mm] [7/8” / 1”] • Made to last and give very good grip in all conditions • Excellent control and comfort for all motorcycle riders • Rubber [TPR] compound, very long lasting and hard wearing • Minimum diameter for gripping power • Grip length overall 120mm • Available in: black Part No. 12-3933.BK. FIR

Street Style Grip Good for restoring that old classic or and affordable replacement for your everyday bike. Street Motorcycle Grips Classic Style. • Universal fitting for STD bars / throttle. [22.2/25.1mm] [7/8” / 1”] • Made to last and give very good grip in all conditions • Excellent control and comfort for all motorcycle riders • Plastic [PVC] compound, very long lasting and hard wearing • Minimum diameter for gripping power • Grip lenght overall 120mm • Dual Wall grip with an inner-ribbed air chamer for soft feel • Available in: black Part No. 12-3931.BK.FIR

Street / Road Classic Grips These are perfect replacements for any airhead with open end grips or they can be used if you’re installing bar end weights, bar end turn signals, or bar end mirrors. They made of a durable yet soft rubber that’s long lasting. Perfect for custom applications or if you just want a different look and feel. • Specification: 7/8” + 1”, open end grip design with 2 separate end caps. • Available in: Black Part No. 12-411.BK

Foam Grips The most comfortable grip, which moulds to the shape of your hand for maximum grip. Available in: Black, Blue or Red

Please note; not recommended for motocross

Part No.

12-392

Street Style Grip Heaters Grip heaters with road style grips. Complete with wires and connectors. Adjustable heat switch with four settings also included. Fits 7/8 handlebars, 12A/35W, 12.6V. Grip Heaters 12-004

Grip Heaters Keep your hands warm with a self adhesive pad that sticks to each side of the handlebar and allows you to slip the grip of your choice over the pad. Includes, HI, LO and Off control. Grip Heaters 44-100.PR Trade Pack of 6 44-100_PK/6

*Please visit our website for current prices

E-mail: [email protected]

www.oro2u.com

D11

Handlebars

Grip Accessories

Renthal Grip Donuts These Renthal Grip Donuts not only make your bike look “Factory” they will help save the inside of your hands from blisters late into a moto-x allowing you to charge to the last lap. Available in 3 colours Red, Blue and Grey. Renthal Donuts 13-123

ProTaper Blister Busters (Grip Donuts) ProTaper Blister Busters. Helps prevent blisters from forming on the thumb. Constructed from soft, comfortable Neoprene. ProTaper Blister Busters 13-121.PRO

Pro Grip Donuts Pro Grip Anti-Blister foam donuts. Give your knuckles a break, add a pair of these thermo formed foam pads to any pair of off road grips for an extra layer of protection. Available in 6 colours: Blue, Black, Green, Orange, Red and Silver. Sold in pairs. Pro Grip Donuts 13-119

Psychic Grip Donuts (Blister Beaters) Psychic grip donuts. Helps prevent blisters from forming on the thumb. Constructed from soft, comfortable Neoprene. Available in 6 different designs: Blue / Yamaha logo, Black / Skull images, Green / Kawasaki logo, Orange /KTM logo, Red / Honda logo and Yellow / Suzuki. Blue Yamaha Donuts 13-130.BE Black Skull Donuts 13-130.BK Green Kawsaki Donuts 13-130.GN Orange KTM Donuts 13-130.OR Red Honda Donuts 13-130.RR Yellow Suzuki Donuts 13-130.YE Trade Pack Of 10 13-130_PK10

13-118.BK

13-118.MON

Grip Donuts Super Soft Grip Donuts. Give your knuckles a break, add a pair of these to any pair of off road grips for an extra layer of protection. Available in 2 designs: Super Soft of Monster Energy. Sold in pairs. Super Soft Donuts 13-118.BK Monster Energy Donuts 13-118.MON

48-010.PRO

48-010.BB

48-010.HRC

48-010.RT

Clean Grips Keeps your grips clean while your mechanic works on the bike. Velcro fastened, manufactured from lightweight synthetic fabric. Power-wash proof permanent graphics. Used by top factory teams. Blackbird Racing Clean Grips 48-010.BB Blackbird HRC Clean Grips 48-010.HRC ProTaper Clean Grips 48-010.PRO RaceTech Clean Grips 48-010.RT

Renthal Clean Grips Keeps your grips clean while your mechanic works on the bike. Velcro fastened, manufactured from lightweight synthetic fabric. Power-wash proof permanent graphics. Used by top factory teams. Renthal Clean Grips 48-010.REN

*Please visit our website for current prices

www.oro2u.com

Tel: 01597 822 666

Fax: 01597 825 224

D12

Handlebars

GripWire & Glue

Safety Wire Kit An ideal starter kit for wiring bolts, drain plugs, grips etc. to eliminate loosening. An easy to use tool, together with 30 Mt. of safety wire.

Safety Wire Kit. Trade Pack of 10

00-460

00-460

00-460.PK/10

Safety Wire Pliers For a professional finish when wiring grips, bolts & screws. A powerful set of pliers with a locking mechanism, which grips the wire, with a built in spinner to evenly coil the wire.

Locking Pliers Trade pack of 5

00-370

00-370.PK5

00-370

Grip Wire Stainless steel wire for securely fastening on handle bar grips, or wiring bolts, etc. Very important with the power output of today’s bikes. Wire is 0.8mm thick.

Grip Wire 30 metres Trade Pack of 10 450g Workshop Roll

00-395

00-395.PK/10 00-395_450g

00-395

00-395_450g

MP Grip Glue & Multi Purpose Adhesive This versatile adhesive bonds quickly and securely to a wide variety of materials in a broad range of temperatures, but not so fast you can’t get your grips on in time, a problem with a lot of other adhesives used for grips. Motion Pro grip glue remains flexible after it cures, it’s waterproof, and is easily removable when it comes time to change grips. This glue is also an excellent general purpose adhesive applicable to a number of other uses.

MP Grip Glue & Adhesive

01-201

01-201

Grip Glue 36g Tube The biggest tube of grip glue we stock! 36g tube, ideal for use on all types of grip.

Grip Glue 36g

01-200

Griplock Pack of 10

01-200.PK/10

Pro*Clean Grip Lock Spray Grip Lock is the easiest way to fit your grips EVER. Ditch the mess of super glue, and the spray paint, Grip Lock is affordable, and really works!

Pro*Clean Grip Lock 70ml

72-203

Three Bond Grip Lock Specifically formulated to vulcanize rubber grips to the handlebar. 28.35g (1oz).

01-200

72-203

Griplock

01-102

01-102

*Please visit our website for current prices

E-mail: [email protected]

www.oro2u.com

D13

Throttles

Push/Pull

Push/Pull Throttle Opens carburettors up to 38mm. Perfect for smooth-bore conversions on street and race bikes. Special cables available to fit most conversions. • Die cast aluminium housing with Black epoxy finish or Chrome finish • Injection moulded throttle tube • Push Pull throttle

Motion Pro Throttle Assembly (Black) FIR Throttle Assembly (Black) FIR Throttle Assembly (Chrome)

12-076.BK 12-059.BK 12-059.CH

Replacement Sleeve Universal Cable Pull Universal Cable Push

12-206

14-709.A 14-709.B

Universal Push/Pull Throttle Universal 4-Stroke push/pull throttle. Will fit almost all 4-strokes.

• Aluminium throttle housing • Injection moulded throttle tube

• Push Pull throttle • 180 0 turn throttle

Universal Push/Pull Throttle Assembly 12-039.EA Pack Of 10 Throttles 12-039.PK/10

4-Stroke Push/Pull Throttle Domino 4-Stroke push pull throttle. • Aluminium throttle housing • Injection moulded throttle tube • Stroke 28mm/90° - 36mm/112° • Push Pull throttle • Includes Domino Victor Half Waffle Grips Part No. 12-098

Quick Action Push/Pull Throttle Domino quick action push pull 4-Stroke throttle.

• Aluminium throttle housing • Injection moulded throttle tube • 90 0 turn throttle • Push Pull throttle • Includes Domino Dually Grips Part No. 12-094

*Please visit our website for current prices

www.oro2u.com

Tel: 01597 822 666

Fax: 01597 825 224

D14

Single Pull

Throttles

PSYCHIC

600A Venhill Dual Throttle All new improved Venhill dual rate twistgrip. Replacing the 312 throttle. The 600A features a new CNC machined body; with improved aluminium diverter

Magura ‘314’ Style Throttle Reinforced Polycarbonate housing seals well against mud or water. This throttle integrates 2 opening ratios in one housing; can be easily adjusted from fast opening moto-x ratio to that of a moderate progressive enduro ratio. • Opens 28-40mm carburettors • Turn can be easily changed from 90 0 to 100 0 turn in minutes

roller and rotor for positive location and feel. You can easily change settings by simply hooking up the cable to the alternative position on the rotor; Ideal if you want to change from Race (68 deg.) to Enduro (80 deg.) of rotation. • CNC machined throttle housing • Turn can be easily changed from 68 0 to 80 0 turn in minutes.

Psychic ‘314’ Style Throttle Assembly

12-060.C

Venhill 600A Dual Throttle Assembly

12-314

Pack Of 6 Throttles

12-060.C/PK6

Replacement Adjuster

12-312_A

Universal cable to fit ‘314’ Bing/Delorto Carb

14-702

Universal cable to fit ‘314’ Bing/Delorto Carb

14-702

Quick Action Throttle Domino quick action throttle. Includes throttle housing cover. • Aluminium throttle housing • Injection moulded throttle tube • Quick action • Quickness 1.9 0 /mm, Stroke 50mm • Domino Grips Included Part No. 12-091

90 0 Quick Action Throttle Cemoto universal throttle with grips included. • Injection moulded housing & throttle tube • 90 0 Quick action throttle • Grips Included Part No. 12-042

180 0 Universal Throttle Cemoto universal throttle with grips included. • Injection moulded housing & throttle tube • 180 0 turn throttle • Grips Included Part No. 12-047

225 0 Universal Throttle Cemoto universal throttle with grips. • Injection moulded twist-grip & throttle tube • Forward facing adjuster • 225 0 turn throttle • Grips Included Part No. 12-044

Universal Quick Action Throttle Universal quick action throttle with full waffle grip set. • Aluminium throttle housing • Injection moulded throttle tube • Forward facing adjuster • Single pull cable • Grips Included Part No. 12-036

Vintage Aluminium Throttle Magura vintage aluminium twist throttle. • Polished aluminium throttle housing with trap door cover and adjusting screw for twist regulation • Injection moulded throttle tube • Single pull cable

• 38mm Stroke • Grip Included Part No.

12-0603.MAG

*Please visit our website for current prices D15

E-mail: [email protected]

www.oro2u.com

Throttles

Throttle Tubes

ducati Models

Years

Part No.

748

1999 - 02 2000 - 02 2000 - 02 2003 - 06 2004 - 06 2003 - 06

12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511

748 R 748 S

749

749 R 749 S

FIR Throttle Tubes

Supersport 900

2002

• This throttle tube is a smart replacement for your worn out or busted twist throttle • Featuring a 3 piece interchangeable 24 tooth cam system, you have full customization at your fingertips • Includes a quick turn race cam to reduce overall rotation, allowing you to go full throttle without adjusting your grip • Whether you have a single or dual cable throttle this tube does it all

996

1999 - 01 1999 - 00 1999 - 01

996 S

996 SPS

996 R

2001

998

2002 - 04

998 FE

2004 2002 2002

998 R 998 S

999

2003 - 06 2004 - 06 2004 - 06 2003 - 06 2007 - 08 2008 - 09

999 R 999 S

Supersport 1000

1098

1098 R

1098 RTB

2009

1098 S

2007 - 08 2004 - 07 2006 - 07 1999 - 03 2004 - 05

ST3

12-0511

ST3 S

ST4

ST4 S

Aprilia Models

honda Models

Years

Part No.

Years

Part No.

RS50

1999 - 04 1999 - 04

12-0511 12-0511

RC51 RC51

2004 - 06 2008 - 09

12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511

RS250

Dorsoduro 750

2010 - 11 12-0511

GROM 125 CBR600 F2 CBR600 F2 CBR600 F3 CBR600 F4 CBR600 F4i

2014 1992

Shiver 750 ETV1000 RST1000 RSV1000R

2008 - 11 2002 - 07 2001 - 05 2004 - 06 2000 - 04 2003 - 04 2005 - 11 2011 - 13

12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511

1993 - 94 1995 - 98 1999 - 00 2001 - 06

SL1000

Tuono 1000 Tuono 1000R Dorsoduro 1200

CB600 F CB600 F

2004

2006 - 07 2003 - 14

CBR600 RR CBR600 SE RVF 750 R

FALCO R

1998

2003

RSV4

1995 - 09 2002 - 08 1995 - 00

2010 - 11

RSV4 R

CB900 F

2011

RSV MILLE RSV MILLE R

CBR900 RR CBR900 RR CBR929 RR CBR954 RR

1999 - 03 2000 - 03

2004

2000 - 01 2002 - 03

bmw Models

CB1000

1995 1994

CB1000 R CB1000 R

Years

Part No.

2011 - 14 1993 - 96 2004 - 14 2000 - 06 1997 - 03

S1000R S1000RR

2014

12-0511 12-0511

CBR1000 F CBR1000 RR RVT1000 R CBR1100 XX

2009 - 14

buell Models

Years

Part No.

1125CR

2009 - 10 2008 - 10 2000 - 09 1998 - 02 2002 - 10 1996 - 10

12-0511 12-0511 12-0511 12-0511 12-0511 12-0511

ktm Models

1125R

Years

Part No.

Blast

690 990

2008 - 10 2007 - 10 2009 - 11

12-0511 12-0511 12-0511

Cyclone Firebolt Lightning

1190

*Please visit our website for current prices

D16

www.oro2u.com

Tel: 01597 822 666

Fax: 01597 825 224

Throttles

Throttle Tubes

kawasaki Models Years

FIR Throttle Tubes

Part No.

Ninja 250R Ninja 300 Ninja 500 Ninja 500R ZZR600 Ninja 650 Versys 650 Ninja 650R

1992 - 12 2013 - 14 1992 - 96 1997 - 09 2003 - 08 2012 - 14 2008 - 13 2006 - 11 2006 - 11

12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511

• This throttle tube is a smart replacement for your worn out or busted twist throttle • Featuring a 3 piece interchangeable 24 tooth cam system, you have full customization at your fingertips • Includes a quick turn race cam to reduce overall rotation, allowing you to go full throttle without adjusting your grip • Whether you have a single or dual cable throttle this tube does it all

suzuki Models

Z750

Years

Part No.

Z750 R Z750 S

2011

2005 - 06 1995 - 06 2011 - 14 2003 - 14 1999 - 00 2001 - 05 2002 - 05 2004 - 05 2008 - 14 2009 - 10 1995 - 02 1995 - 14 2003 - 06 1992 - 05 1992 - 03 1996 - 97 1995 - 03 2004 - 14 1992 - 01 2000 - 05 2006 - 11 2012 - 14 2000 - 03

RF900 R

1995 - 97 2001 - 09 2011 - 14 2003 - 04 2003 - 05 2003 - 07 1998 - 03 1997 - 01 2002 - 09

12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511

Concours 1000

GSXR1000 GSXR1000 GSXR1000 Z

Ninja 1000

Z1000

ZRX1100 ZRX1200 ZZR1200

SV1000

SV1000 S TL1000 R TL1000 S

ZRX1200 R Concours 14

VSTROM 1000 VSTROM 1000 VSTROM 1000

ER-6N

2012 2014 1992

Ninja ZX6 Ninja ZX6R Ninja ZX6RR Ninja ZX7 Ninja ZX7R Ninja ZX7RR Ninja ZX9R Ninja ZX10 R Ninja ZX11 Ninja ZX12R

GSXR1100

GSXR1100 W BANDIT 1200 GSX1250 FA BANDIT 1250 S

1993 - 98 1997 - 05 2011 - 12 2007 - 09 1999 - 09 2011 - 14

HAYABUSA HAYABUSA

B-KING

2008

Boulevard

2005 - 14

Ninja ZX14

Ninja ZX14 R

triumph Models

ZR7S

Years

Part No.

Daytona 600 Daytona 650 Daytona 675 Daytona 675 R

2003 - 04

12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511

suzuki Models

2005

2006 - 14 2011 - 14 1997 - 98

Years

Part No.

Banit 600 GSXR 600 GSXR 600

1996 - 03 1997 - 09 2011 - 14 1992 - 93

12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511

Daytona Daytona

2002

Speed Triple Speed Triple Speed Triple R

1995 - 14 2007 - 14 2013 - 14

GSXR 600 W GSXR 600 M GSXR 600 X GSXR 600 Z GSXR 600 Z Katana 600

2002 2005 2001 2003

yamaha Models

1995 - 05 1995 - 97 2008 - 09

Years

Part No.

RF600 R

FZR600

1992

12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511 12-0511

Katana 650 Katana 650

FZR600 R YZF600 R YZF750 R FZR1000 YZF1000 YZF1000 R

1992 - 99 1995 - 07 1994 - 98 1992 - 95

2012 2009

SFV650 SFV650

2013 - 14 1999 - 09 2003 - 09 2008 - 09 1999 - 09

SV650

1997 1997

SV650 A SV650 F SV650 S SV650 S SV650SF

FJR1300

2003 - 05 2009 - 14 2001 - 14

V MAX 1700

2012

FZ1

2008 - 09 2004 - 09 2011 - 14 1997 - 09 2011 - 14

FZ09

2014

VSTROM 650 VSTROM 650

FZ6

2004 - 09 2009 - 14 2011 - 13 1998 - 14

FZ6R

GSXR750 GSXR750 GSXR750X Katana 750

FZ8

YZF R1

2005

YZF R1 S

2001

1992 - 06

YZF R6

1999 - 14

YZF R6 S YZF R6 S

2001

2006 - 09

YZF R7

1999

*Please visit our website for current prices

E-mail: [email protected]

www.oro2u.com

D17

Throttle Kits

Rev2

The Most Advanced Variable Rate Throttle In The World.

Motion Pro Rev2 TM Throttle Kit • The second generation of Motion Pro’s innovative reel changing system lets you tailor the throttle rate to riding conditions and rider preference. • New ultra compact housing with snap-together elbows make it easy to install and change reels. • Sleek new design requires less handlebar space for lever clearance and throttle position. • Use smaller reels for slower throttle rate and larger reels for faster throttle rate. • Included cam reel provides progressive throttle response preferred by some riders. • Unique reel design allows fast reel changes. • Cable boot keeps dirt and dust out for reliable and smooth operation. • Billet aluminium in-line cable adjusters for easy installation and adjustment. • Lower section of cables use 5mm housing with PTFE liner for reduced friction, increased routing flex - ibility and lighter weight. • Upper section of cables use 6mm housing to provide solid support of adjusters. • Simple to install and maintain. • Designed by Motion Pro. • Patent pending. . Kits Include: • Complete Rev2™ Throttle Assembly with throttle tube (MX/Off-road kits Include Titan™ Throttle Tube).

• High quality Motion Pro black vinyl cables (specifically designed for your bike). • 5 interchangeable reels: 35, 40, 45, 50mm and cam reel (MX/Off-Road: gray). • Set of Motion Pro Grips (MX/Off-road kit: DirtControl™ grips). • Rev2™ Throttle Equipped decal set. • Printed colour instructions.

See pages D11a-D11b for full applications

Rev2 TM Replacement Parts:

Rev2.1 Throttle Housing • Replacement throttle housing for Rev2 throttle kit. • Made from durable cast aluminium. • Can only be used with Rev2 reels and cables. • Works with Titan Throttle Tube P/N 12-254 and Rev2 Street Throttle Tube P/N 01-1217. • Patent pending. Part No. 12-253

Rev2 Throttle Cables, Push-Pull Set • Snap-together elbows make it easy to install and change reels. • Cable boot keeps dirt and dust out for reliable and smooth operation. • Billet aluminium inline cable adjusters for easy installation and adjustment. • Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight. • Upper section of cables use 6 mm housing to provide solid support of adjusters.

Rev2 Reels • Replacement reels for Rev2 throttle. • Unique lightweight design. • High wall keep cables securely on reel. • Colour coded and marked for easy identification. • Heavy-duty nylon composite for increased strength and smooth operation.

35mm Reel (Black) 40mm Reel (Blue) 45mm Reel (Red) 50mm Reel (Yellow) Cam Reel (Off Road)

12-255_35.BK 12-255_40.BE 12-255_45.RD 12-255_50.YE 12-255_CAM.MX

• Simple to install and maintain. • Motion Pro Rev2™ black vinyl cables specifically designed for your bike.

*Please visit our website for current prices

D18

www.oro2u.com

Tel: 01597 822 666

Fax: 01597 825 224

Throttle Kits

Rev2

bmw Models

CC

Years

Part No.

S1000RR

1000

2009 - 14

14-K352.REV2

ducati Models

CC

Years

Part No.

848 SBK

0848 0848 0848 1098 1098 1098 1098 1198 1198 1198 1198 1198

2008 - 10 2011 - 13 2012 - 13

14-K353.REV2 14-K353.REV2 14-K353.REV2 14-K353.REV2 14-K353.REV2 14-K353.REV2 14-K353.REV2 14-K353.REV2 14-K353.REV2 14-K353.REV2 14-K353.REV2 14-K353.REV2

848 SBKEVO

848 SBKEVO Corsa SE

1098 SBK

2008 2009

1098R Bayliss SBK

1098R SBK 1098S SBK 1198 SBK

2008 - 09

2008

2009 - 11

1198R Corse SBK 1198S Corse SBK

2010 2010

1198S SBK 1198SP SBK

2009 - 10

2011

Motion Pro Rev2 TM Throttle Kit • The second generation of Motion Pro’s innovative reel changing system lets you tailor the throttle rate to riding conditions and rider preference. • New ultra compact housing with snap-together elbows make it easy to install and change reels. • Sleek new design requires less handlebar space for lever clearance and throttle position. • Use smaller reels for slower throttle rate and larger reels for faster throttle rate. • Included cam reel provides progressive throttle response preferred by some riders. • Unique reel design allows fast reel changes. • Cable boot keeps dirt and dust out for reliable and smooth operation. • Billet aluminum in-line cable adjusters for easy installation and adjust- ment. • Lower section of cables use 5 mm housing with PTFE liner for reduced friction, increased routing flexibility and lighter weight. • Upper section of cables use 6 mm housing to provide solid support of adjusters. • Simple to install and maintain. • Designed by Motion Pro. • Patent pending.

honda Models

CC

Years

Part No.

CBR600RR CBR600RR CBR1000RR CBR1000RR

0600 0600 1000 1000

2003 - 06 2007 - 19 2004 - 07 2008 - 16

01-2735 01-2734 01-2733 01-2732

kawasaki Models

CC

Years

Part No.

ZX 600N ZX 600P ZX 600R ZX 636C ZX 636D ZX 636E ZX 636EF ZX 1000D ZX 1000E ZX 1000J ZX 1000JF ZX 1400A ZX 1400C

0600 0600 0600 0636 0636 0636 0636 1000 1000 1000 1000 1400 1400

2007 - 08 2009 - 12 2005 - 06

14-K362.REV2 14-K363.REV2 14-K356.REV2 14-K356.REV2 14-K364.REV2 14-K364.REV2 14-K358.REV2 14-K359.REV2 14-K360.REV2 14-K360.REV2 14-K365.REV2 14-K365.REV2 14-K365.REV2

2006

2013 - 14 2015 - 17 2006 - 07 2008 - 09 2011 - 14

2015

2006 - 07 2008 - 11 2012 - 14

Foot Note 134 - Special order only! Closed Course Race application only. Stock XR1200 uses 1” handlebar. Must use 7/8” handlebars. No replacement RH switch that features RH t/s,start/stop and start button. 140 - For use with stock throttle bodies/ carburetors and Rev2 throttle assembly only. IMPORTANT - The Rev2 throttle does not have the starter and kill switch wiring or switches that are built into your stock throttle assembly. Use of the Rev2 Throttle requires an after market kill switch and starter button assembly (pn 11-0098) not included in kit. Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation. Installation should be done by a qualified mechanic and carefully checked for proper function. Warning: Improper installation could result in great bodily injury or death. 142 - Off road Rev2 throttle kits require a minimum of 200 mm of handlebar length in order to provide sufficient clearance between Rev2 throttle housing and hydraulic brake lever. 143 - For use with stock throttle bodies. Rev2 throttle kit for BMW S1000RR. Vehicle production date range 09/08 - 03/12. Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer aftermarket handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation. Installation should be done by a qualified mechanic and carefully checked for proper function. Warning: Improper installation could result in great bodily injury or death. 144 - Rev2 Kits have cables specifically designed for fitment on specific models, but the Rev2 throttle itself is not model specific. Therefore, in some situations, the Rev2 kit may not be a direct bolt on installation due to space limitations on the stock handlebar. In some installations, it may be necessary to move other control components on the stock handlebar, shorten the Rev2 throttle tube and grip, install longer after market handlebars, or possibly all of the above. It is up to the end user to determine the best method for fitment on their motorcycle, and ensure that the Rev2 kit is installed properly and with the correct clearances for safe operation. Installation should be done by a qualified mechanic and carefully checked for proper function. Warning: Improper installation could result in great bodily injury or death. 145 - 01-2765 Rev2 throttle kit features throttle cable set 01-1270 that is 3 inches longer than throttle cable 01-1269 included in Rev2 throttle kit 01-2764. 146 - Rev2 cables can only be used with stock throttle body (or carburetor where applicable) and Rev2 throttle. 147 - Designed to fit BMW S1000RR production date range 09/08 - 08/12. Rev2 cables can only be used with stock throttle bodies (or carburetor where applicable) and Rev2 throttle. 148 - 3 inches longer than standard length Rev2 throttle cable part number 01-1269. Rev2 cables can only be used with stock throttle body (or carburetor where applicable) and Rev2 throttle.

*Please visit our website for current prices

E-mail: [email protected]

www.oro2u.com

D19