Data Loading...
ORO2U Tools Catalogue - Section C - Suspension & Frame Tools
35 Downloads
3.72 MB
Twitter Facebook LinkedIn Copy link
RECOMMEND FLIP-BOOKS
ORO2U Tools Catalogue - Section E - Specialist Tools
T 1978 - 79 20 x 1.50 Right External 00-094 CB450 SC 1978 - 79 20 x 1.50 Right External 00-094 CM 45
ORO2U Dirt Catalogue - Section A - Tools
Black.Please note this stand is recommended by the manufacturer to be securely fastened to the groun
ORO2U Tools Catalogue - Section H - Electrics
6A Note; Charger comes with a Euro plug, therefore, will need an adaptor 00-8104 • BS60 - Pro Smart
ORO2U Tools Catalogue - Section G - Workshop
truck single step • Constructed from high quality steel • Mounts to hitch plate • Step size; 220mm x
ORO2U Tools Catalogue - Section D - Hand Held Tools
8 inch drive T-handle • Unique 2-step drive head offers swivel or fixed drive • Bearing mounted spin
ORO2U Tools Catalogue - Section A - Tyre, Chain & Wheel.
4oz Segments 11-3003.SI.MP 11-3003.SI.MP 11-3002.SI.MP 11-3005.BK.MP 11-3004.BK.MP WEB: ORO2U.COM PL
ORO2U Tools Catalogue - Section B - Engine, Carb & Exhaust
SX 2000 - 02 26x1.00 RH 00-231 250 SXF 2005 - 10 26x1.00 RH 00-231 525 EXC 2003 - 07 26x1.00
ORO2U ATV Catalogue - Section A - Race Box Tools
Black.Please note this stand is recommended by the manufacturer to be securely fastened to the groun
ORO2U Tools Catalogue - Full Catalogue - All Sections
4oz Segments 11-3003.SI.MP 11-3003.SI.MP 11-3002.SI.MP 11-3005.BK.MP 11-3004.BK.MP WEB: ORO2U.COM PL
ORO2U Tools Catalogue - Section I - Nuts and Bolts
6 2008 44.00 9.95 47.00 08-9659.041.HON HUSQVARNA Size (mm) Models FC 250 FE 250 FC 350 FE 350 FE 35
SECTION C INDEX
FORK AIR PUMPS FORK CAP TOOLS
C17
C12-14 C15-16 C10-11
FORK CAP WRENCHES FORK SEAL DRIVER TOOLS
FORK SERVICE TOOLS
C1-2
FORK TOOLS FRAME TOOLS
C1-10
C25 C18 C19
NITROGEN EQUIPMENT SHOCK SERVICE TOOLS SHOCK SPRING TOOLS
C22-24 C20-21 C26-28
SHOCK TOOLS
STEERING HEAD TOOLS
WEB: ORO2U.COM PLEASE VISIT THEWEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
FORK SERVICE TOOLS
TWIN CHAMBER FORK TOOL (TAG-Z) Tag-Z offers a brand new tool for working with Showa, KYB andWP Twin chamber forks. A high quality steel construction with a blue or red powder coated finish. This tool allows the technician to easily compress the fork spring and position the fork rod for easy disassembly. The tool eliminates damage to the fork rod, speeds up production and makes life much easier for a professional or home-shock tech.
Tag-Z Twin Chamber Fork Tool (Black/Blue) Tag-Z Twin Chamber Fork Tool (Black/Red)
33-524.BE/BK 33-524.RD/BK
Made in UK
33-524.RD/BKWorking
33-524.RD/BK
FORK TUBE U-BLOCK SETS (TAG-Z) Tag-Z fork tube ‘U’ block sets. Precision machined from billet aluminium, these quality 3 piece sets are handy, accurate and safe way to straighten and check fork tubes. Available in 3 sizes; 41-43mm, 44-46mm and 47-48mm.
33-570.43
Tag-Z Fork Tube U-Block Sets 41-43mm Tag-Z Fork Tube U-Block Sets 44-46mm Tag-Z Fork Tube U-Block Sets 47-48mm
33-570.43 33-570.46 33-570.48
33-570.48
Made in UK
33-570Working
SHAFT HOLDING TOOL (K&L) K&L shaft holding tool. Holds fork damping rods, cartridges, shock shafts, etc. while servicing. Constructed from solid aluminium.
K&L Shaft Holding Tool 20, 24 & 29mm (3in1)
00-1900.KL
For 20 & 25mm Fork Cartridges
K&L Shaft Holding Tool 32 & 35mm (2in1)
00-1901.KL
00-1901.KL
00-1900.KL
For 28 & 32mm Fork Cartridges
K&L Shaft Holding Tool 10, 12, 12.5 & 14 mm (4in1)
00-199.KL
For Damping Rods
K&L Shaft Holding Tool 14, 16 & 18mm (3in1)
00-202.KL
For Shock Shafts
00-202.KL
00-199.KL
Sample Image of Shaft Holding Tool Working
VISE SOFT JAWS INSERT Vise soft jaws insert. Aluminium soft jaw insert for vise. Ideal for holding cranks, suspension shafts etc safely without causing any damage. These vise inserts will hold shafts from 7mm to 15mm diameter.
CARTRIDGE ROD HOLDING PLATE (FIR) FIR cartridge rod holding plate tools. This tools allows you to easily disassemble Showa, Twin-Chamber, as well as most street cartridge forks. The tool holds back the spring allowing you to loosen or tighten the bottom nut or the fork cap on the cartridge rod. Plastic design keeps shafts from being marred. Size; Length 84mm, Width 38mm, Thickness 6mm.
Soft Jaws Vise
00-8048
FIR Cartridge Rod Holding Plate
00-7823
00-7823Working
00-7823
00-8048
WEB: ORO2U.COM PLEASE VISIT THEWEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
C1
FORK SERVICE TOOLS
FORK TUBE & CARTRIDGE ROD TOOL (FIR) Spec.: Holder: 102 X 102mm, I.D.: 56mm, Handle: 292mm X 2Pieces Plate; Length 84mm, Width 38mm, Thickness 6mm
• Used to assemble and disassemble fork tubes from fork bottoms • Perfect for disassembly and assembly of KYB / SHOWA twin chamber and most street cartridge forks • Designed to hold back the spring allowing you to loosen or tighten the bottom nut or the fork cap on the cartridge rod • Fits 10 to 12.5mm rods
00-0091.FIRWorking
00-0091.FIR
FIR Fork Tube & Cartridge Rod Tool
00-0091.FIR
SUSPENSION / PISTONVICE Suspension / Piston Vice. Ideal for servicing pistons or suspension. Soft jaws to protect your piston / fork from damage. Simply bolts to work top or in your vice. Working travel 30-65mm.
Suspension / Piston Vice
00-518
00-518
00-518Working
INNER DAMPER ROD HOLDING TOOL Inner fork damper holder drive 3/8”. Provides a positive means of holding the inner damper rod while removing the bolt from the bottom of the fork leg. Ideal tool to hold damper rod when disassembling and assembling front forks. It provides a secure method of holding the inner damper rod while removing the bolt from the bottom of the fork leg. Fits Kawasaki KDX/KX/KZ and Z series models. Size; 10mm - 18mm taper square.
15-25mm
10-18mm
Dirt Racing Inner Damper Rod Holding Tool K&L Inner Damper Rod Holding Tool
00-017.DR 00-017.KL
INNER DAMPER ROD HOLDING TOOL (FIR) Inner damper rod holding tool for Kawasaki. Provides a positive means of holding the inner damper rod while removing the bolt from the bottom of the fork leg. Ideal tool to hold damper rod when disassembling and assembling front forks. It provides a secure method of holding the inner damper rod while removing the bolt from the bottom of the fork leg on Kawasaki models (KX, Z and KZ). Size; 15mm - 25mm taper square.
00-0171.DR
00-017.KL
FIR Inner Damper Rod Holding Tool
00-0171.DR
FORK DAMPER ROD HOLDING TOOL (K&L) Holds damper rod when disassembling and assembling front forks. Provides a positive means of holding the inner damper rod while are moving the bolt from the bottom of the fork leg.
K&L Fork Damper Rod Holding Tool 24mm 24mmHex YM-01328 Yamaha 38mm Kayba Forks K&L Fork Damper Rod Holding Tool 30mm 30mmHex YM-01327 Yamaha 43mm Kayba Forks
00-7761
00-7761
00-7760
00-7760
K&L Fork Damper Rod Holding Tool 41mm 41mm Retainer Nut Wrench YM-01525 Yamaha
00-7762
00-7762
WEB: ORO2U.COM PLEASE VISIT THEWEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
C2
K-Tech
FORK TOOLS
Fork Clamping Tool (K-Tech) K-Tech front and rear specification suspension tools are designed to help suspension technicians to improve efficiency in there workshop. All tools are designed with experience of over twenty years in the suspension industry to enable users to work effectively and safely.
Note; You will need to also buy the inserts that you need separately.
K-Tech Fork Clamping Tool
00-0450.00.KT
00-0450.00.KT
Fork Clamping Tool Inserts (K-Tech) • Billet aluminium • CNC machined for perfect fit • Holds fork components without damage
K-Tech front and rear specification suspension tools are designed to help suspension technicians to improve efficiency in there workshop. All tools are designed with experience of over twenty years in the suspension industry to enable users to work effectively and safely.
Note; You will need to also buy the holding tool separately.
K-Tech Fork Clamping Tool Insert, 35mm K-Tech Fork Clamping Tool Insert, 36mm K-Tech Fork Clamping Tool Insert, 41mm K-Tech Fork Clamping Tool Insert, 43mm K-Tech Fork Clamping Tool Insert, 45mm K-Tech Fork Clamping Tool Insert, 46mm K-Tech Fork Clamping Tool Insert, 47mm K-Tech Fork Clamping Tool Insert, 48mm K-Tech Fork Clamping Tool Insert, 49mm K-Tech Fork Clamping Tool Insert, 50mm
00-0450.35.KT 00-0450.36.KT 00-0450.41.KT 00-0450.43.KT 00-0450.45.KT 00-0450.46.KT 00-0450.47.KT 00-0450.48.KT 00-0450.49.KT 00-0450.50.KT
00-0450.35.KT
00-0450.50.KT
Shock Absorber Piston Rod Vice Clamp (K-Tech) K-Tech shock absorber piston rod vice clamp 14/16/18mm.
K-Tech front fork and shock absorber tools are designed to help suspension technicians to improve efficiency in their workshops. All tools are designed with the experience of over twenty years in the suspension industry to enable users to work effectively and safely.
K-Tech Shock Absorber Piston Rod Vice Clamp 14/16/18mm
00-0458.KT
00-0458.KT
Fork Piston Rod Clamp (K-Tech) • Billet aluminium • Hard Black anodized finish • CNC machined for perfect fit • Holds fork components without damage • K-tech Logo
K-TECH Front and Rear Specification suspension tools are designed to help suspension technicians to improve efficiency in there workshop. All tools are designed with experience of over twenty years in the suspension industry to enable users to work effectively and safely.
00-0451.13.KT
00-0451.10.KT
K-Tech Piston Rod Clamp, 10.00/12.00mm K-Tech Piston Rod Clamp, 13.00mm K-Tech Piston Rod Clamp, 12.50/14.00mm
00-0451.10.KT 00-0451.13.KT 00-0451.14.KT
Front Fork Cartridge Tube Clamp (K-Tech) • One Piece Clamp • Billet aluminium
• Hard Black anodized finish • CNC machined for perfect fit • Holds fork components without damage
00-0451.14.KT
K-Tech Front and Rear Specification suspension tools are designed to help suspension technicians to improve efficiency in there workshop. All tools are designed with experience of over twenty years in the suspension industry to enable users to work effectively and safely.
K-Tech Front Fork Cartridge Tube Clamp, 24mm K-Tech Front Fork Cartridge Tube Clamp, 25mm K-Tech Front Fork Cartridge Tube Clamp, 27mm K-Tech Front Fork Cartridge Tube Clamp, 28mm K-Tech Front Fork Cartridge Tube Clamp, 29mm K-Tech Front Fork Cartridge Tube Clamp, 34mm K-Tech Front Fork Cartridge Tube Clamp, 36mm K-Tech Front Fork Cartridge Tube Clamp, 37mm
00-0452.24.KT 00-0452.25.KT 00-0452.27.KT 00-0452.28.KT 00-0452.29.KT 00-0452.34.KT 00-0452.36.KT 00-0452.37.KT
00-0452.25.KT
WEB: ORO2U.COM PLEASE VISIT THEWEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
C3
FORK TOOLS
Front Fork Cartridge Tube Clamp (K-Tech) • One Piece Clamp • Billet aluminium
• Hard Black anodized finish • CNC machined for perfect fit • Holds fork components without damage
K-Tech Front and Rear Specification suspension tools are designed to help suspension technicians to improve efficiency in there workshop. All tools are designed with experience of over twenty years in the suspension industry to enable users to work effectively and safely.
K-Tech Front Fork Cartridge Tube Clamp, 24mm K-Tech Front Fork Cartridge Tube Clamp, 25mm K-Tech Front Fork Cartridge Tube Clamp, 27mm K-Tech Front Fork Cartridge Tube Clamp, 28mm K-Tech Front Fork Cartridge Tube Clamp, 29mm K-Tech Front Fork Cartridge Tube Clamp, 34mm K-Tech Front Fork Cartridge Tube Clamp, 36mm K-Tech Front Fork Cartridge Tube Clamp, 37mm
00-0452.24.KT 00-0452.25.KT 00-0452.27.KT 00-0452.28.KT 00-0452.29.KT 00-0452.34.KT 00-0452.36.KT 00-0452.37.KT
00-0452.25.KT
FORK DAMPING ADJUSTING TOOL (FIR) This adjusting tools is flat and has a tip on the bottome so it easily fits between the handlebar and top of the fork tube on almost all setups.
FIR Fork Damping Adjusting Tool
00-7822
00-7822
00-7822Working
WEB: ORO2U.COM PLEASE VISIT THEWEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
C4
FORK TOOLS
FORK ALIGNING TOOL (Motion Pro) • Quick and easy to use tool for aligning front forks to ensure they are parallel from top to bottom • Knurled adjustment screws for easy setup • Reduces stiction and improves the performance of your front suspension • Reduces seal and bushing wear • Fits most MX and Off-Road motorcycles (does not work on most sport bikes due to large brake rotor diameter and 17 inch wheel diameter) • Will work on 27 mm - 62 mm fork legs and tubes • Works on forks that are 140 mm to 220 mm on centre • Patented design . Motion Pro ForkTru Fork Aligning Tool 00-860
00-860
00-860Working
FORK TUBE TOOL KIT (Psychic) Psychic fork tube tool kit. It provides 7 different threaded plugs allowing you to use this single tool to reinstall the fork-clegs into the trees. Fast and easy on your Triumph, BSA or Norton motorcycle. Thread it into the fork tube and crank it down, pull the fork tube taper right into place in top triple tree. Driver Length; 300m , w/2pcs nut, 1 washer, 1 cover, 7 pcs holder 1-1/16” -28”, 1-1/16” -26. 1-1/16” -20, 1-1/8” -20, 1-3/16” -20, 1”-20, 15/16” -20.
Psychic Fork Tube Tool Kit
00-8066
00-8066
00-8066
FORK INTERNAL DRIVER TOOL (FIR) FIR Special 4 pin type driver used for forks.
Used to Adjust KTM shocks WP White Power Used to replace the inner fork spring
• • • • • • • • •
Damper Assembly tool
Go-through hole as socket sacks
Over All Length 180mm
Hex Drive 24mm
Centre Hole Bottom 12mm / Top 19mm
4 pins Dia. 4.8mm each
Made from Carbon Steel & BZP finish
FIR Fork Internal Driver Tool
00-8760.FIR
00-8760.FIR
SHOCK COMPRESSION ADJUSTER (FIR) FIR 4 pin type driver for adjusting the shock.
Used to Adjust KTM shocks WP White Power
• • • • • • • •
Shock Compression tool
Go-through hole as socket sacks
Over All Length 48mm Hex Drive 22mm Center Hole 13mm 4 pins Dia. 3mm each
Made from Carbon Steel & BZP finish
FIR Fork Internal Driver Tool
00-8490.FIR
00-8490.FIR
WEB: ORO2U.COM PLEASE VISIT THEWEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
C5
FORK TOOLS
FORK OIL LEVEL GAUGE Fir Fork Oil Level Tool. For checking and adjusting the oil level on all conventional and single chamber cartridge forks Adjustable ring will measure oil levels from 0 to 300mm in 0.5cm increments Syringe has a capacity of 60ml can be used on bicycles equipped with front suspension.
FIR Oil Level Gauge (Each)
00-802.FI.EACH 00-802.FI.PK10
FIR Oil Level Gauge (Trade Pack of 10)
00-802.FI
00-802.FI Working
FORK OIL LEVEL GAUGE (Motion Pro) Motion Pro Fork Oil Level Gauge.
• For checking and adjusting the oil level on all conventional and single chamber cartridge forks • Adjustable ring will measure oil levels from 0 to 300mm in 0.5cm increments • Syringe has a capacity of 60ml • Can be used on bicycles equipped with front suspension • Replaces HD® tool HD-590000-B, Buell® tool B-590000-B and Indian® OEM #PV-59000A • Motion Pro Oil Level Gauge (Each) 00-802.MP
00-802.MP
00-021.EAWorking
FORK OIL SYRINGE
Fork oil syringe. To add or remove oil accurately and easily. Ideal for forks and shocks. Accurate to 60ml.
FIR Fork Oil Syringe (Each)
00-021.EA
FIR Fork Oil Syringe (Trade Pack of 10)
00-021.PK10
OILER PEN Mini precision oil pen. For the exact replacement of oil or any other lubricant. Smooth actuator allows for greater control and placement of the lubricant. Generous reservoir, with a protective screw on cover to prevent leakage. Has a convenient pocket clip. Ideal for fine tuning forks.
Mini Precision Oil Pen Mini Precision Oil Pen
00-451.DR 00-451.F
00-451.DR
00-451.F
Sample Image of 00-451.DRWorking
WEB: ORO2U.COM PLEASE VISIT THEWEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
C6
FORK TOOLS
PEN OILER (Beta) Beta oiler syringe. Length; 280mm. Capacity; 500ml
Beta Oil Pen, 500ml
09-9176
09-9176
00-295
FORK OIL REPLACEMENT/REFILL KIT (K&L) K&L fork oil replacement kit, 8mm x 1.25 thread. Special clear plastic tube and fitting allows replacement of fork oil through the drain plug, without disassembling the fork and front end. Fork oil not included .
K&L Fork Oil Replacement / Refill Kit (Each)
00-295
00-295Working
SEAL MATE The easy way to keep your fork seals clean and debris free. Extract dirt or debris trapped between fork seal and tube. Will work on conventional an up-side down forks. (Sold Each)
Motion Pro Seal Mate
00-322.EACH
00-322Working
00-322
FORK SEAL HEAD TOOL This tool helps you to change fork springs without valve disassembly. This tool allows you to remove and replace the seal head assembly from the fork tube in 41mm and 43mm BPF.
Fork Seal Head Tool
00-8058
00-8058
WEB: ORO2U.COM PLEASE VISIT THEWEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
C7
FORK TOOLS
HOOK & PICK SET (5 Pcs) A 3.5” aluminium handle and four different types of picks. Straight tip, o-ring 90° tip, hook tip and an angled tip. Used for pulling seals, o-rings, wire clips and cotter pins quickly and easily. Comes as a 5 piece set. Handle includes a magnet in the end, ideal for recovering small items.
K&L Hook & Pick Set
00-057.KL
HOOK & PICK SET (4Pcs) Pick and Hook 4 Piece Set. Heat treated, chrome plated, chrome vanadium steel shafts and hard-grip handles. Set contains: Straight pick, 900 Hook, Full Hook and Offset 450 Hook.
00-057.KL
Hook & Pick Set
00-758.N
00-758.N
PROFESSIONAL HOOK & PICK SET (7Pcs) Professional Pick and Hook 7 Piece Set. Ideal for use separating wire, marking, punch, brake spring puller, removing small fuses & stuck parts, cotter pin extractor, O-ring puller, seals, cotter pins, bushes and retrieving lost washers or nuts.
Hook & Pick Set
00-8030
00-8030
00-8030
SEAL & O-RING PICK Seal & O-Ring Pick. Handy seal and o-ring pick, removes very small o rings without damage. Has a knurled aluminium handle. Length; 100mm.
Scriber Pick
00-940.E
00-940.E
SCRIBER PICK Double-ended, hardened steel engineers scriber. Knurled and blackened grip.
Scriber Pick
00-182
00-182
FORK TUBE BRUSH Fork & Tube Brush Size; 65mm, Length; 120mm.
00-515.EACH
FORK TUBE BRUSH • Designed to help clean grit and residue from stantions when servicing forks • 28 inch long, vinyl covered wire for no scratch • Sure Grip dual density handle provide a positive grip • Sold straight but can be bent into any shape • Overall length 720mm Brush Dia. 40mm • This extra long brush allows you to reach them tight places • Nylon Medium to soft bristles, can be used with all types of cleaning fluids • Handy top loop for hanging up to dry after use • Fork & Exhaust Brush 00-531
00-515.EACH
00-531
WEB: ORO2U.COM PLEASE VISIT THEWEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
C8
FORK TOOLS
DAMPER ROD FORK TOOL This damper rod fork tool is two tools in one. It is designed for disassembly of most inverted Kayaba and Showa 41, 43, 45 and 47mm forks.
Dirt Racing Damper Rod Fork Tool Motion Pro Damper Rod Fork Tool
00-815.DR 00-815.MP
00-815.MP
Dirt Racing Damper Rod Fork Tool (XR400/DRZ) Motion Pro Damper Rod Fork Tool (XR400/DRZ)
00-824.DR 00-824.MP
00-824.MP
FORK DAMPER ROD LOCK TOOL Damper rod lock tool for hydraulic forks. • Provides a positive means of holding the inner damper rod while removing the bolt from the bottom of the fork leg • Square has fluted edges to grip the inner core of the damping rod • Hexagon shaft with hole on top • Finish BZP Gold
Available in two sizes; Point outer diameter from 5 to 13mm - Total length 340mm Point outer diameter from 14 to 17mm - Total length 600mm Buzzetti Fork Damper Rod Lock Tool (340mm) Dirt Racing Fork Damper Rod Lock Tool (340mm) Buzzetti Fork Damper Rod Lock Tool (600mm) Dirt Racing Fork Damper Rod Lock Tool (600mm)
Sample Image of 00-569 / 00-570Working
00-569.BUZ 00-569.DR 00-570.BUZ 00-570.DR
00-569.DR
00-570.DR
DAMPER ROD BLEED TOOL (Motion Pro) Motion Pro 5 in 1 damper rod bleed tool. Tool design allows for effortless retrieval of damping rod after spring installation • Perfect for working on Kayaba, Showa andWP inverted forks • One piece design means no lost parts • Rod includes downward facing bleed port to prevent oil splatter • Five thread sizes in one tool:M10 x 1.0, M10 x 1.25, M12 x 1.0, M12 x 1.25 and M14-1.0 • Precision billet aluminium construction with durable blue anodized finish and laser engraved markings
00-9630.MP
Motion Pro Damper Rod Bleed Tool
00-9630.MP
DAMPER ROD BLEED TOOL This tool design allows for effortless retrieval of damping rod after spring installation. Perfect for working on Kayaba, Showa andWP inverted forks. Rod is zinc plated with knurled handle for secure grip. Rod includes covered bleed port to prevent oil splatter. Four brass hex adapters are included; M10x1.0, M12x1.0, M12x1.25 and M14x1.0.
00-9630.MPWorking
Dirt Racing Damping Rod Bleed Tool
00-323.DR
00-323.MP
Motion Pro Damping Rod Bleed Tool
00-323.MP
FORK DAMPER ROD BLEED TOOL KIT (K&L) K&L fork damper rod bleed tool. This tool is used for threading to damper rod and allows better control of bleeding. Works on most Japanese applications. Kit includes; M9x1.0, M10x1.0 and M12x1.25.
K&L Fork Damper Rod Bleed Tool Kit
00-296
00-296
CUP BLEED TOOL (KYB) KYB cup bleed tool for rear shocks. (KYBST99).
KYB Cup Bleeder Tool
09-1029.KYB
09-1029.KYB
WEB: ORO2U.COM PLEASE VISIT THEWEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
C9
FORK TOOLS & FORK SEAL DRIVER
UNIVERSAL UPSIDE DOWN FORK ASSEMBLY TOOL Buzzetti universal upside down fork assembling / disassembling tool.
Universal Upside Down Fork Assembly Tool
00-571
00-571
FORK SEAL DRIVERS Designed for easy installation of most fork seals on either conventional or inverted forks in 26-45mm or 39-50mm configuration. Manufactured from plated carbon steel, featuring split design and weighted body. Sold individually.
Fork Seal Driver Tool (39-50mm) Fork Seal Driver Tool (26-45mm)
00-432.A 00-432.D
00-432.A
00-432.D
ADJUSTABLE FORK SEAL DRIVERS (K&L) Adjustable fork seal driver. Designed for easy installation of most fork seals.
K&L Adjustable Fork Seal Driver Tool (38-52mm) K&L Adjustable Fork Seal Driver Tool (26-36mm)
00-8560.KL 00-8561.KL
00-8560.KL
00-8561.KL
FORK OIL SEAL DRIVERS Designed for easy installation of most fork seals on either conventional or inverted forks in 39, 41, 43, 45, 46/47 and 49/50mm configuration. Manufactured from plated carbon steel, featuring split design and weighted body. Sold individually.
FIR 35/36mm Seal Driver FIR 43mm Seal Driver FIR 46/47mm Seal Driver FIR 48mm Seal Driver FIR 49/50mm Seal Driver Motion Pro 39mm Seal Driver Motion Pro 45mm Seal Driver
00-818
00-811.DR 00-813.FI 00-832.DR 00-814.FI 00-817.MP 00-812.MP
00-817.MP
00-817.MPWorking
WEB: ORO2U.COM PLEASE VISIT THEWEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
C10
FORK SEAL DRIVER TOOLS
RINGER FORK SEAL DRIVERS (Motion Pro) Innovative design makes tool easier and safer to use than old fashioned pin aligned drivers. Anodized aluminium locking ring features knurled finish for secure no-slip grip and positively locks body halves together during use. No more worrying about part of the tool falling off and damaging the fork leg. Perfectly weighted to drive seals. Body halves are machined from durable carbon steel and feature a high quality protective black-coat with laser engraved marking. Patent pending.
Motion Pro 35/36mm Seal Driver Motion Pro 37mm Seal Driver Motion Pro 39mm Seal Driver Motion Pro 41mm Seal Driver Motion Pro 43mm Seal Driver Motion Pro 45mm Seal Driver Motion Pro 46/47mm Seal Driver Motion Pro 48mm Seal Driver Motion Pro 49mm Seal Driver Motion Pro 50mm Seal Driver
00-7806 00-7807 00-7808 00-7809 00-7810 00-7811 00-7812 00-7813
00-7806
00-7806Working
00-7814.49 00-7814.50
FORK SEAL DRIVER SET Fork Seal Driver Set 9pc. The complete and ideal set for any workshop. A 9 piece fork seal driver set . Designed for easy installation of most fork seals on either conventional or inverted forks. Set includes driver sizes: 35/36, 39, 41, 43, 45, 46/47, 48, 49/50 and 54mm. Manufactured from carbon steel and finish is golden plate featuring a split design and weighted body.
Fork Seal Driver Set
00-896
00-896
FORK SEAL BULLET SETS (Motion Pro) Protect the fork seal and wiper of inverted forks from damage by the bushing groove during installation. Saves time by eliminating the need to wrap the fork tube with tape. Set includes all 7 sizes. Each size is a different colour.
Kit Includes; 36mm Bullet Seal (Red) 41mm Bullet Seal (Blue) 43mm Bullet Seal (Green) 45mm Bullet Seal (Yellow) 46mm Bullet Seal (Black) 47mm Bullet Seal (White) 48mm Bullet Seal (Orange)
00-287 00-288 00-289 00-293 00-291 00-292 00-320
Motion Pro Fork Seal Bullet Set
00-796
00-796
00-287
00-288
00-291
00-292
00-293
00-289
00-320
00-796Working
FORK SEAL BULLET (Motion Pro) • Protects the fork seal and wiper of inverted forks from damage by the bushing groove during installation • Eliminates the need to wrap the fork tube with tape • Fitment size is marked on each bullet for easy identification
Motion Pro Fork Seal Bullet 49mm
00-0089.MP
00-0089.MP
00-0089.MPWorking
WEB: ORO2U.COM PLEASE VISIT THEWEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
C11
FORK CAP TOOLS
Motion Pro
FORK CAP TOOL FOR KYB (Motion Pro) Motion Pro 2 piece, fork cap tool. For removing the fork cap and compression cartridge on twin chamber KYB forks found on late model Honda, Husqvarna, Kawasaki, and Yamaha off-road motorcycles. Outer ring fits 49 mm octagonal fork cap Inner body holds cartridge so it can be removed from fork cap. Outer ring can be clamped in vise to hold fork cap securely while cartridge is being removed. Provides more secure grip on fork cap and cartridge and reduces risk of damage during disassembly. Easier and faster to use than any other tool now available. Billet 6061 aluminium construction with anodized blue finish 1/2 inch square drive. (Sold Each)
00-8071Working
Motion Pro Fork Cap Tool (KYB 49mm)
00-8071
00-8071 (Sold Each)
FORK CAP TOOL FOR SHOWA (Motion Pro) Motion Pro 2 piece, fork cap tool for Showa forks. For removing the fork cap and compression cartridge on twin chamber Showa forks found on late model Honda, Kawasaki, and Suzuki off-road motorcycles. Outer Ring fits 50mm octagonal fork cap. Inner body holds cartridge so it can be removed from fork cap. Outer ring can be clamped in vise to hold fork cap securely while cartridge is being removed. Provides more secure grip on fork cap and cartridge and reduces risk of damage during disassembly. Easier and faster to use than any other tool now available. Billet 6061 aluminium construction with anodized blue finish. 1/2” square drive. (Two Piece Set)
Motion Pro Fork Cap Tool (Showa 50mm)
00-867
00-867
00-867Working
FORK CAP TOOL FOR SHOWA SSF (Motion Pro) Motion Pro 2 piece, fork cap tool for Showa SSF forks. For removing the fork cap and compression cartridge on Showa SSF forks Outer ring fits 50mm octagonal fork cap. Inner body holds cartridge so it can be removed from fork cap. Outer ring can be clamped in vise to hold fork cap securely while cartridge is being removed. Provides more secure grip on fork cap and cartridge and reduces risk of damage during disassembly. Easier and faster to use than any other tool now available. Billet 6061 aluminium construction with anodized blue finish. 1/2 inch square drive. (Two Piece Set)
Motion Pro Fork Cap Tool (Showa SSF 50mm)
00-868
00-868Working
00-868
FORK CAP TOOL FOR SHOWA SSF (Motion Pro) MP Showa fork tool 22mm (SSF). Removes the lower sealing bolt from Showa SFF Fork Non- marking 6061 billet aluminium construction. Anodized finished.
Motion Pro Fork Cap Tool (Showa SSF 22mm)
00-869
00-869
00-869Working
SHOWA BPF ROD GUIDEWRENCH (Motion Pro) Motion Pro Showa BPF rod guide wrench. Used to remove internal rod guide on Showa BPF 43mm forks. 12 point design for positive engagement in rod guide. Black oxide finish.
Motion Pro Showa BPF Rod GuideWrench
00-062.41_43.MP
FIR Showa BPF Rod GuideWrench
00-062.FIR
00-062.41_43.MP
WEB: ORO2U.COM PLEASE VISIT THEWEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
C12
FORK CAP TOOLS
SHOWA BPF FORK CAP SOCKET (Motion Pro) • Used to remove aluminium fork cap on Showa BPF 43mm forks • Fits 8 sided 45mm fork cap • Durable blue anodized finish • Replaces Honda oem tool 07AMA-MGPA100 • Replaces Kawasaki oem tool 57001-1741 • Replaces Suzuki oem tool 09941-53670-LPT
00-061
Motion Pro Showa Fork Cap Socket
00-061
00-061Working
WP4CS FORK CAP SOCKET (Motion Pro) • Fits 2014 KTM XC models and all 2013-2014 Husaberg with WP 4860 4CS forks • For removing and installing LH and RH adjustable fork caps • Allows you to properly torque the fork cap assemblies during installation • 17 mm hex head • Made from billet 6061 T-6 aluminium. Anodized finish with laser engraving
09-1009.MP
09-1009.MP
Motion ProWP4CS Fork Cap Socket
09-1009.MP
Sample Image of 09-1009.MPWorking
FORK COMPRESSION BOLT DRIVER Compression bolt removal tool. Will fit KTM SX/SX-F 2007-2010. White power (WP) forks. For removing and installing the compression valve assembly from the fork cap. 17mm hex head. Made from billet 6061 T-6 aluminium.
Motion Pro Fork Compression Bolt (Blue)
00-581.MP
00-581Working
FORK COMPRESSION BOLT DRIVER Compression bolt removal tool. Fits; KTM SX/SX-F 2007-2013, KTM XC / XCF 2008-2013, Husaberg FX/SM 2010-2011, FE 2011-2013. • Allows you to properly torque the compression valve assembly during installation • Constructed from billet 6061 T-6 aluminium, with silver, hard anodized, finish • Hexagon End 17mm • Allows you to properly torque the compression valve assembly during installation
Dirt Racing Fork Compression Bolt (Silver)
00-581.DR 00-581.FIR
00-581.MP
00-581.FIR
FIR Fork Compression Bolt (Silver)
FORK CAP REMOVER (Motion Pro) •
Versatile design features a 22mm hex and 3/8” square drive
• Precision design prevents damage to the retainer ring after peened stakes have been removed by drilling • Replaces the OEM Honda tool to remove and replace the rear wheel bearing / seal retainer ring, part number 41231-430-000 • For use on: CR250R 78-83, CR450R 81, CR480R 82 • This tool allows removal and replacement of the accessory fork cap KTM part# 48600074S • The tool is slotted to allow removal and replacement of caps with the11-0081 Micro Bleeders
00-214Working
Motion Pro KTM Fork Cap Remover Tool
00-214
00-214
WEB: ORO2U.COM PLEASE VISIT THEWEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
C13
FORK CAP TOOLS
FORK COMPRESSIONVALVE TOOL (Motion Pro) Fork compression valve removal tool. For use with YZ125/250 2005, and YZF250/450 2005. Replaces Yamaha OEMYM-01500. For removing the compression valve from cartridge. 19mm drive hex / 36mm octagon. Manufactured out of billet 6061 T-6 aluminium.
FIR Fork Compression Tool
00-391.FIR
00-391_MP
00-391.FIR
Motion Pro Fork Compression Tool
00-391_MP
FORK COMPRESSIONVALVE TOOL (SCAR) WP fork compression valve removal tool (2in1). Special 2 in 1 tool for removing compression valves on WP CC 48 and 4CS. CNC Machined and anodized for long lasting finish.
SCAR Fork Compression Tool
00-5810.SCAR
00-5810.SCAR
OHLINS FORK CAP TOOL (K&L) K&L fork cap tool. Special tool for Ohlins brand forks with pin-type fork caps. Rubber cushion prevents damage when removing and installing the cap.
K&L Fork Cap Tool
00-7763.KL
00-7763.KL
00-7763.KLWorking
FORK CAP REMOVER (FIR)
FIR 32mm Fork cap removal tool. This pin spanner is a dual purpose tool for the Showa SFF Air TAC Fork. This tool allows you to properly remove the fork cap as well as the compression base at the bottom of the fork. (Sold Each)
FIR Fork Cap Remover Tool
00-8761.FIR
00-8761.FIR
Sample Image of 00-8761.FIRWorking
Fork Cap Pin Spanner Wrench
• Unique curved billet aluminum arms provide clearance and ease of use • Stainless steel shoulder bolt pivot • Replaceable hardened tool steel pins • Includes 4 mm and 3 mm pins
• Low profile pins provide added clearance on fork caps • Durable blue anodized finish with laser engraved markings • Designed for use on many forks and shock absorbers • For low torque use only
00-014.MP
FIR Fork Cap Remover Tool
00-014.MP
WEB: ORO2U.COM PLEASE VISIT THEWEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
C14
FORK CAPWRENCHES
DUAL CHAMBER FORK CAPWRENCHES (FIR) This tool has a12mm slot for holding the damper rod for removing the rebound bolt. This allows for the removal of the cartridge from the lower fork leg. Sold Each. 50mm dual chamber fork cap wrench used on late model KTM’s. 6 point box wrench for removing the fork cap. Thickness: 6mm, Length: 260mmWP 4860 MXMA dual chamber closed cartridge (WP USD 48 mm) forks on late-model KTM. Dirt Racing 50mm Dual Chamber Fork CapWrench 00-872.DR 49mm dual chamber fork cap wrench. 8pt box wrench for removing the fork cap on dual chamber closed cartridge forks on late-model Yamaha’s. Dirt Racing 49mm Dual Chamber Fork CapWrench 00-873.DR
00-873.DR
00-872.DR
DUAL CHAMBER FORK CAPWRENCHES (Motion Pro) This tool has a12mm slot for holding the damper rod for removing the rebound bolt. This allows for the removal of the cartridge from the lower fork leg. Sold Each. 50mm dual chamber fork cap wrench used on late model KTM’s. 6 point box wrench for removing the fork cap. Thickness: 6mm, Length: 260mmWP 4860 MXMA dual chamber closed cartridge (WP USD 48 mm) forks on late-model KTM.
Motion Pro 50mm Dual Chamber Fork CapWrench
00-872.MP
00-872.MP
49mm dual chamber fork cap wrench. 8pt box wrench for removing the fork cap on dual chamber closed cartridge forks on late-model Yamaha’s.
Motion Pro 49mm Dual Chamber Fork CapWrench
00-873.MP
00-872.MPWorking
FORK CAPWRENCH (SCAR) SCAR fork cap wrench. Specialist wrenches for disassembling Kayaba, Showa andWP forks. Manufactured from stainless steel and aluminium (Kayaba) and aluminium (WP and Showa) WP. Please see website for fitments listings. Sold Each.
SCAR Fork CapWrench 50mm (Orange) SCAR Fork CapWrench 50mm (Red) SCAR Fork CapWrench 49mm (Silver)
09-1133.SCAR 09-1134.SCAR 09-1135.SCAR
09-1133.SCAR
09-1134.SCAR
09-1135.SCAR
SLIM FORK CAPWRENCH (SIFAM) Wrench key for steering column and fork cap.
Heavy-Duty Long Arm lock nut wrench with reinforce vinyl grip handle to remove lock nuts easy and safely. Fits into narrow gaps wear sockets and Spanners are not able to. Overall Length 12” (300mm).
Sifam Slim Fork CapWrench 32mm Sifam Slim Fork CapWrench 34mm Sifam Slim Fork CapWrench 39mm Sifam Slim Fork CapWrench 41mm
00-7909 00-7910 00-7911 00-7912
00-7909
WEB: ORO2U.COM PLEASE VISIT THEWEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
C15
FORK CAPWRENCHES
FORK CAPWRENCH (Motion Pro) Tool for removing the caps on Showa MX Forks. One end is 46mm, the other is 50mm. Can be used for the removal of the compression stack. CNC machined for precise fit and tolerance. 6061 aluminium material is non-marring on fork caps.
Motion Pro Fork CapWrench
00-0052.MP
00-0052.MP
00-0052.MPWorking
FORK CAPWRENCH
Fork CapWrench 45 x 49mm (Sold Each)
00-7829
FIR Fork CapWrench 46 x 50mm (Sold Each)
00-825.FIR
FIR Fork CapWrench 46 x 50mm ( Trade Pack of 10)
00-825.DR/PK10
FIR Fork CapWrench 49 x 50mm (Sold Each)
00-7828
00-7829
00-7828
KTM FORK CAPWRENCH KTM Fork cap wrench. For use on KTM models with WP fork cap. Wrench has 4 piece pin designed specifically for the job.
KTM Fork CapWrench
00-7827
00-7827
00-825.FIR
FORK CAPWRENCH (Motion Pro) •
For use on Showa 49mm Twin Chamber MX Forks 50mm, 8-point box wrench for removing fork cap 6-point box wrench for removing base valve from cartridge
• •
• 14 mm slot for holding the damper rod for removing the rebound bolt. This allows for the removal of the cartridge from the lower fork leg • CNC machined for precise fit and tolerance • Constructed of 6061-T6 aluminium material that is non-marring on fork caps • Durable blue anodized finish with laser engraved markings
Motion Pro Fork CapWrench
00-825_MP
09-1136.MP
POLYAMIDES (PA) FORK CAPWRENCHES Fork CapWrench. Wrench is made from Polyamides (PA) with fibre that will allow you to remove your fork cap without damaging it. Available in four different sizes, and are suitable for use on road and off road machines. Please see our website for full fitments listings.
24mm Fork CapWrench 30mm Fork CapWrench 32mm Fork CapWrench 35mm Fork CapWrench
00-7844 00-7843 00-7842 00-7841
00-7844
WEB: ORO2U.COM PLEASE VISIT THEWEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
C16
FORKWRENCHES / FORK AIR PUMPS
FORK CAPWRENCH (FIR)
- This professional grade, motorcycle tool for use on front forks. - Fork CapWrench 48mm KYB Dual chamber cartridge fork, With rod stoper end. - The large end is for removing the top cap screw from the fork leg and the forked end is for holding the rebound adjusters, there's also a cool bottle opener in the middle. - Material: Aluminum 6061-T6. - Surface Processing: Hard black Anodized coating finish. - Open wrench design for easy operation in small spaces. - Opposite end of the wrench is rod stopper to hold piston rod when removing piston inner cartridge. - This tool will allow you to remove the front fork cap without damage. - Sold Each. - FIR-BRAND products are a high quality. Tools, Accessories and Part all carries our guarantee of your satisfaction. KTM SX SXF 125/250/350/450/530 2007-2015 Note. The EXC with its 4CS forks are different.
00-7765.FIR
Fork Cap Wrench
00-7765.FIR
FORK CAPWRENCHES (FIR)
- This professional grade, motorcycle tool for use on front forks. - Fork CapWrench, Dual chamber With rod stoper end. - Material: Steel, Heat Treatment for durability.
- Surface Processing: Hard black electro coating finish. - Open wrench design for easy operation in small spaces. - Opposite end of the wrench is rod stopper to hold piston rod when removing piston inner cartridge. - Socket hole available for torque wrench.( Socket size is 9.5 sq = 3 / 8 inch ). - This tool will allow you to remove the front fork cap without damage. - Sold Each. - FIR-BRAND products are a high quality. Tools, Accessories and Part all carries our guarantee of your satisfaction. Please see web publishing for full fitment list
00-7766.FIR
48mm WP 49mm KYB
00-7768.FIR 00-7766.FIR 00-7767.FIR
50mm Showa / KYB / WP
FORK AIR PUMP (PSYCHIC) • Large digital LCD display •
Universal swivel valve for Fatbar and standard bar access Flexible hose attached to a 360 degree pivot system
• • • • • • • •
Micro adjust air bleed button
0.5psi/1.0psi increments below/above 100psi
00-2641.DR
0-300psi/0-20.69 bar operating range
psi, bar, kg/cm pressure scales Auto start and auto shut off
Aluminium 6063 T6 Extrusions, Hard anodised finish
Fits;
Honda CRF250R 2015-16 KTM SX 50/65 2017- 18 Honda CRF 450R 2013-15 KTM SX 85 2018 KTM SX 125/150 2016- 18 Kawasaki KX450F 2013- 18 KTM SX-F 250/350/450 2016- 18
Suzuki RM-Z250 2016- 18 Husqvarna TC 50/65/85 2018 Suzuki RM-Z450 2015-17 Husqvarna TC/FC 125/250/350/450 2017- 18
00-2641.DRWorking
Psychic Fork Air Pump
00-2641.DR
FORK AIR PUMP • Specially designed gauge 3.5 bar/50psi for motorcycle suspension • Universal swivel valve for Fatbar and standard bar access • Flexible hose attached to a 360 degree pivot system • Micro adjust air bleed button • Long stroke barrel • Anti-air loss valve • Kayaba PSF (pneumatic spring forks) • Fits Honda CRF 450R 2013-2015, and Kawasaki KXF 450 2013-2014.
00-8068
Fork Air Pump
00-8068
00-8068Working
WEB: ORO2U.COM PLEASE VISIT THEWEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
C17
NITROGEN EQUIPMENT
NITROGEN SHOCK GAUGE (Motion Pro) Motion Pro precision pressure gauge calibrated to 300psi. Comes complete with bleeder valve and T-handle plunger pin chuck. This gauge unit will accurately read nitrogen gas pressure within a rear shock without loss of gas. Swivel head chuck has 12” of flexible hose. Instructions included.
Motion Pro Shock Gauge
00-072
Motion Pro Replacement Schrader Valve Extension
00-060.MP
00-072
00-060.MP
NITROGEN NEEDLE Nitrogen needle used to charge shocks fitted with a self sealing rubber valve, i.e. some Yamaha Ohlin Shocks. Adapter for use with the above nitrogen gauge (00-072), or can be used with most other nitrogen gauges. Comes complete with instructions.
Dirt Racing Nitrogen Needle & Adaptor
00-075.DR
00-075.MP
Motion Pro Nitrogen Needle & Adaptor Motion Pro Replacement Needle Only
00-075.MP 00-077.MP
00-075.MP Assembled
00-075.MP
NITROGEN PRESSURE GAUGE (KYB) Allows easy and accurate charging of forks and shocks. High pressure gauge reads up to 200psi. Comes with a handy storage case. 0-15 bar pressure gauge.
Nitrogen Pressure Gauge
00-030.KYB
00-030.KYB
REGULATED NITROGEN FILLING SYSTEM (K&L) K&L custom built set features an actual regulator to precisely control pressurisation. A high pressure schrader extension is included to allow access to recessed schrader valves. 350 psi maximum output is limited by an ASME certified relief valve. Pressure is supplied through vinyl covered steel braided line to help protect painted surfaces. A no-loss high pressure schrader adapter completes the system. Standard cores should not be used in suspension applications due to their 200 psi rating limit. Nitrogen tank is not included, available through your local welding supplier.
K&L Regulated Nitrogen Filling System
00-464
00-464
WEB: ORO2U.COM PLEASE VISIT THEWEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
C18
SHOCK SERVICE TOOLS
BENCH MOUNTED SHOCKSWORK STAND (K&L) Bench mounted work stand mounts to any flat surface (bolts not included ) with a 4x4 base. It is 8 inch tall and 26inch long fully open. Fully adjustable and designed to hold and to grip components of all shapes. Round stanchins, sliders, shocks, pistons, etc. can be held safely and securely. The 360 degree rotation of the clamp makes servicing from all angles a breeze, The work stand clamp also features fully adjustable clamping pressure for components up to 4inch in diameter or width. None marring, replaceable jaw inserts provide a firm grip on items up to 80lbs.
K&L Bench Mounted ShocksWork Stand
00-303 00-4990
K&L Replacement Jaw Covers
00-303
Sample Image of 00-303Working
00-4990
WORKSHOP FLOOR STAND (K&L) K&L Work Stand. Height Adjusts from 50 to 60”. Includes aluminium tool tray. Note: Base not included. The Work Stand is designed to safely and securely hold odd shaped components such as fork stanchions, sliders, carbs, rear shocks, pistons, etc. The 360° rotation of the clamp makes servicing from all angles a breeze. These Work Stands feature adjustable clamping pressure for components up to 4 inches (100mm) in diameter. Non-marring, replaceable jaw inserts provide a firm grip on items up to 80 lbs. (Floor base not included.)
K&LWorkshop Floor Stand
00-3031.KL
Base Not Included
Base Not Included
00-3031.KL
Sample Image of 00-3031.KLWorking
PIVOT SUSPENSIONVISE (Motion Pro) Designed to make suspension service simple and quick. Holds shocks and forks securely while you change oil, re-valve, or change seals. Pivoting head holds parts in any position, with mechanical stops every 45°. Aluminium Soft Jaw Vise holds cylindrically shaped parts utilizing a 4 point grip system. Large side holds 39 mm to 69 mm diameter parts. Small side holds 14 mm to 39 mm diameter parts. Steel Frame is rigid yet has a small footprint, with 4 pre-drilled holes in the base for secure mounting to a bench. Movable fluid catch pan with mesh insert, and threaded drain bung. Please see website for more information on how this tool works on forks and shocks.
Motion Pro Pivot Suspension
00-9995.MP
00-9995.MPWorking
00-9995.MP
DELUXE SUSPENSION BEARING SERVICE TOOL (Motion Pro) Designed for quick and easy removal and precise installation of suspension linkage and swing arm pivot bearings. Designed for use on 20 & 22mm ID bearings. Fits most off- road motorcycles & ATVs. Includes blind bearing collet for removal of 20mm blind bearings. Kit includes Blind Bearing Puller Adapter. Anodized aluminium mandrels reduce the possibility of damaging bearing surfaces. Laser etched markings for easy size identification. Eliminates the need for a shop press. Protective blow moulded case for easy storage.
00-360.MPWorking
Motion Pro Suspension Bearing Service Tool
00-360.MP
WEB: ORO2U.COM PLEASE VISIT THEWEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
C19
SHOCK TOOLS
SHOCK BUSHING DRIVER TOOL SET Race bushing driver tool set. Used to install shock shaft bushings into the seal head. 4 drivers included in the set: 18mm, 16mm, 14mm and 12.5mm. Storage holder is also included.
Race Bushing Driver Tool Set
00-8043
00-8043
00-8043
00-8043Working
SHOCK SEAL BULLET TOOL (K&L) K&L shock seal bullet tool. “Bullet tools”make the seal head installation onto the shafts quick and easy. Most importantly, the seal will not get damaged on sharp edges when sliding it onto the shaft.
00-107
00-109
00-108
00-107Working
K&L 12.5x10mm Shock Seal Bullet K&L 14x12mm Shock Seal Bullet K&L 16x12mm Shock Seal Bullet K&L 18x16mm Shock Seal Bullet K&L 18x12mm Shock Seal Bullet
00-107 00-108 00-109
00-1091.KL 00-1092.KL
00-1091.KL
00-1092.KL
SHOCK SEAL HEAD INSTALLATION KIT Shock Seal Head Installation Set. Sizes: 12.5x10mm, 14x12mm, 16x12mm, 18x16mm and 18x12mm.
This tool protects the shock shaft seal when installing the seal cone head onto the shaft. It makes for quick removal and installation of seal assemblies.
Shock Seal Head Installation Kit
00-7824
00-7824
00-7824Working
00-7824
00-378.MP
00-9454.MP Front
00-9454.MP Back
WP Shock Clevis Jam Nut Socket (Motion Pro)
WP SHOCK RESERVOIR PIN SOCKET (Motion Pro) This tool removes the shock reservoir cap on all WP shock absorbers. Positive fit and engagement protects reservoir cap from damage. Allows application of extra torque to remove frozen reservoir caps. Allows use of torque wrench when re installing reservoir cap. Durable hardened tool, constructed of steel.
Designed for removal of oval-profile clevis jam nut common on WP Shock Absorbers. Open-end design allows for removal of clevis and service to rebound adjuster without disassembly of shock. Durable heat-treated alloy steel construction Black oxide finish.
Motion ProWP Shock Clevis Jam Nut Socket 00-378.MP
Motion ProWP Shock Reservoir Pin Socket
00-9454.MP
WEB: ORO2U.COM PLEASE VISIT THEWEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
C20
SHOCK TOOLS
FOLDING SAG SCALE (Motion Pro) Motion Pro folding sag scale. New and improved version of the original Motion Pro folding sag scale. Can be used to check front or rear sag. New swing out design is compact and fits in most tool boxes. Adjustable zero set point for direct scale reading (no subtracting requirement). Cone shaped axle location pin fits hollow axles up to 20mm with repeatable precision. Inch and metric scales. Works on mini and full size motorcycles. Made from 6061-T6 aluminium with durable blue anodized finish and laser engraved markings. Extended length 28 3/8” (720mm) and folded length 15 3/4” (400mm).
Motion Pro Folding Sag Scale
00-012.MP
00-012.MP
00-012.MP
00-012.MPWorking
SHOCK NEEDLE REMOVAL DRIVER (PSYCHIC) Psychic shock needle removal driver. Its special pin designed working for WP PDS shock body, to remove the compression needle from the shock. Fits KTM’s with White Powder PDS shocks. 15mmx 2.4mm. 72.5mm long, Hexagon 19mm, Central hole 11.5mm.
Psychic Shock Needle Removal Driver
00-8060
00-8060
SHOCK SPANNER PUNCH (Motion Pro) Motion Pro shock spanner punch. Ideal tool for turning hard to reach lock ring and pre load ring on rear shocks. Angled brass tip gives secure bite and protects ring from damage. Heavy duty construction. Long shaft to reach hard to get at shocks.
Motion Pro Shock Spanner Punch
00-7815
00-7815
Heavy Duty Pin Spanner
• Designed for removal and installation of shock reservoirs, screw-in seal heads, fork caps, and bearing retainers • Freely pivoting arms span a range of 10.5mm to 150mm • Interchangeable 3mm, 4mm, and 5mm hardened steel pins • Integrated 3/8” square drive for use with a breaker bar or torque wrench • Curved, low profile arms easily fit tight areas • Billet heat treated steel construction for increased strength, rigidity and durability
00-014_HD.MP
• Durable black oxide finish with laser engraved markings • Replacement pins available (part number 00-014_HD.PINS) • Maximum torque rating of 70 lbs-ft • Patented • Lifetime limited warranty on body of tool (warranty excludes pins)
FIR Fork Cap Remover Tool
00-014_HD.MP
Replacement Pin Set
00-014_HD.PINS
SHOCK BLADDER PULLER (FIR) FIR shock bladder puller. This tool attaches to the shock reservoir schrader valve, protecting its fine threads and making the bladder removal easy. Does not work on shocks with an angled schrader valve such as current Yamaha YZ models.
FIR Shock Bladder Puller O.D25mm (Red) FIR Shock Bladder Puller O.D19mm (Blue)
00-980.LRG.FIR 00-980.SML.FIR
00-980.LRG.FIRWorking
00-980.LRG.FIR
00-980.SML.FIR
WEB: ORO2U.COM PLEASE VISIT THEWEBSITE FOR UP TO DATE PRICES
CALL: 01597 822 666
C21