BARNES DIGITAL BROCHURE

BARNES DIGITAL BROCHURE

TABLE OF CONTENTS

INTRODUCTION

01 - 02

GALVANISED WIRE

03 - 04

BARBED WIRE

05 - 06

DIAMOND MESH

07 - 08

WELDED MESH

09 - 10

CONSTRUCTION

11 - 12

NETTING WIRE

13 - 14

FIELD FENCE

15 - 16

HARD DRAWN AND RIBBED WIRE

17 - 18

POSTS, STAYS AND GATES

19 - 21

OTHER PRODUCTS

22

ABOUT US

Barnes Fencing Industries (Pty) Ltd is a principal manufacturer of steel products, including wire and fencing for construction, mining, agriculture and hardware industries. Established in 1993, this multifaceted producer boasts a large network of clients in South Africa and abroad. Barnes Fencing Industries prides itself for possessing diverse, talented and passionate employees, from the front desk to the warehouse. On a monthly basis, Barnes Fencing Industries produces about 6000 tons of galvanised wire and products. As a result of its resources and expertise, the company has been able to manufacture quality fencing, wire and a wide range of steel products for the industry at large.

FENCING INDUSTRIES (PTY) LTD

02

GALVANISED WIRE

GALVANISED WIRE

Galvanised wire are supplied in rosette-pattern laid jumbo coils of which the coil weight could range between 300kg to 900kg.

AVERAGE COIL GEOMETRY (900kg COIL)

COIL HEIGHT (mm)

COIL OUTSIDE DIAMETER (mm)

COIL INSIDE DIAMETER (mm)

850

760

450

WIRE DIAMETER RANGE

MINIMUM WIRE DIAMETER (mm)

MAXIMUM WIRE DIAMETER (mm)

1.25mm ± 0.05

5.60 ± 0.10

TENSILE STRENGTH RANGES

Low Tensile

360MPa - 575MPa 600MPa - 900MPa 950MPa Minimum 1350MPa Minimum

Medium Tensile

High Tensile

Ultra-High Tensile

ZINC COATING RANGES SANS 10244 Class A - Heavy Galvanised SANS 10244 Class D - Lightly Galvanised

*Extra Heavy Galvanised - 366g/m 2

*See back page for extract SANS 10244. *Extra Heavy Galvanised offered upon request.

SPLIT AND TIED COILS

For ease of handling, a wide varierty of wire products are split into 50kg, 5kg, 2kg or 500g coils.

HIGH STRAIN FENCING WIRE

ZINC COATING (g / m 2 Min)

NOMINAL ROLL LENGTH (m)

COIL WEIGHT (kg)

WIRE DIAMETER (mm)

BREAK STRENGTH (kN) Min

HEAVY GALVANISED

LIGHTLY GALVANISED

2.00 2.24

3.3 4.2 4.3

215 230 230

40 45 45

2100 1650 1500

50

2.00 x 2.60 Oval

SPECIALITY WIRE

Barnes Fencing Industries also produces the following speciality wire products upon request: • Cotton Bailing Wire • Cable Armouring Wire (SANS 1411 - 6) • Paper Pulp Unitizing Wire

04

BARBED WIRE

BARBED WIRE

ROLL LENGTH (m)

ROLL WEIGHT (kg)

BREAKING STRENGTH (kN)

ZINC COATING (Min)

LINE WIRE (mm)

BARBED WIRE (mm)

PRODUCT

2.24 2.90

1.70 1.70

845 515 845 515 290 845 515 540 380 270 108 540 380 270 800 540 270 150 800 540 500 380 270 160 845 540 270

35.0 35.0 28.0 17.0 10.0 18.0 15.0 50.0 35.0 25.0 10.0 40.0 24.0 18.0 50.0 34.0 17.0 10.0 39.0 31.0 30.0 18.0 15.0 8.10 35.0 24.0 12.0

4.2 6.9

SINGLE STRAND

SINGLE STRAND BABY

2.00

1.70

3.2

SINGLE STEEL LIGHT DUTY

1.57

1.47

2.0

2.50

1.70

4.9

SANS 10244-2:2011 Heavy Galvanised - Class A Lightly Galvanised - Class D

2.20

1.70

3.8

DOUBLE STRAND (IOWA)

2.00

1.80

3.1

1.70

1.60

2.3

REVERSE TWIST HIGH TENSILE

1.57

1.47

4.1

06

DIAMOND MESH

DIAMOND MESH (CHAIN LINKED FENCE)

Design your own combination by selecting one item per catagory: i.e. A=2.00mm / B=Heavy Galvanised / C=75mm / D=1200mm / E=30m *Note: PVC coating (Tennis court wire) is available upon request

1.80

2.00

2.20

2.50

3.15

A. Wire Diameter (mm)

Lightly Galvanised (SANS 10244 Class D)

Heavy Galvanised (SANS 10244 Class A)

B. Zinc Coating

50

65

75

90

C. Aperture Size (mm)

900

1200

1800

2400

3000

3600

4000

D. Roll Height (mm)

25

30

E. Roll Length (m)

08

WELDED MESH

WELDED MESH

INDUSTRIAL MESH

1.60

2.0

A. Wire Diameter (mm)

Lightly Galvanised (SANS 10244 Class D)

B. Zinc Coating

13 x 25

25 x 25

25 x 25

25 x 25

100 x 100

C. Aperture Size (mm) D. Roll Height (mm)

900

1200

1800

30

E. Roll Length (m)

FENCING MESH

2.50

3.15

A. Wire Diameter (mm)

Lightly Galvanised (SANS 10244 Class D)

B. Zinc Coating

50 x 25

50 x 50

75 x 75

100 x 50

100 x 100

C. Aperture Size (mm) D. Roll Height (mm)

900

1200

1800

2400

25

30

E. Roll Length (m)

MINING MESH (ROLLS)

3.15

A. Wire Diameter (mm)

None - Black Hard Drawn Wire

Lightly Galvanised (SANS 10244 Class D)

B. Zinc Coating

75 x 100

100 x 100

100 x 50

C. Aperture Size (mm) D. Roll Height (mm)

900

1200

2400

30

35

E. Roll Length (m)

MINING MESH (SHEETS)

3.15

4.00

5.60

or choose a combination of diameters “Combo”

A. Wire Diameter (mm)

3.15 x 5.60

3.15 x 4.00

4.00

Lightly Galvanised (SANS 10244 Class D)

Heavy Galvanised (SANS 10244 Class A)

Extra Heavy Galvanised (366g/m 2 Min)

B. Zinc Coating

75 x 100

75 x 75

100 x 100

100 x 150

C. Aperture Size (mm) D. Sheet Width (mm) E. Sheet Length (m)

900

1200

1500

1800

2400

1 to 6

10

CONSTRUCTION

CONSTRUCTION

FABRICATED REINFORCING MESH

888

747

617

500

395

311

245

193

100

MRM Reference Number

8.88 200 200

7.46 200 200

6.17 200 200

5.0

3.95 200 200

3.11 200 200

2.45 200 200

1.93 200 200

1.00 200 200

Kg / m 2

200 200

Main (mm) Cross (mm) Main (mm) Cross (mm)

Mesh Pitch

Wire Pitch

12

11

10

9.0

8.0

7.1

6.3

5.6

4.0

Wire Size

12

11

10

9.0

8.0

7.1

6.3

5.6

4.0

Cross Section Area Per Meter Width

566

475

393

318

251

198

156

123

63

REINFORCING BAR / SMOOTH BAR

Actual Wire Diameter (mm)

12.0 0.89 5.32

10.0 0.62 3.70

8.0

7.1

6.3

6.0

5.6

4.0

Diameter Kg / m Kg / 6m

0.39 2.37

0.31 1.86

0.24 1.47

0.22 1.33

0.19 1.16

0.10 0.59

SMOOTH BAR

REINFORCING BAR

SPECIALISED MESH (SHEETS)

3.15 or 4.00

A. Wire Diameter (mm)

None - Black Hard Drawn Wire

B. Zinc Coating C. Aperture Size

50 x 50

100 x 50

1200 2400

D. Sheet Width (mm) E. Sheet Length (mm)

BRICKFORCE

1.8 - 2.8

A. Wire Diameter B. Zinc Coating C. Aperture Size D. Sheet Length (m)

None - Black Hard Drawn Wire

Lightly Galvanised SANS 10244 Class D

75

110

150

230

15

20

12

NETTING WIRE

NETTING WIRE (HEXAGONAL MESH)

CONSTRUCTION

ZINC COATING

HEAVY GALVANISED 10244 CLASS A

LIGHTLY GALVANISED 10244 CLASS D

ROLL LENGTH

APERTURE (mm)

WIRE DIAMETER (mm)

5m 10m 50m

13

0.7

25

0.9

50

1.0

75

1.8

90

1.8

ROLL HEIGHT AVAILABLE (mm)

600

900

1200

1800

14

FIELD FENCE

FIELD FENCE

STANDARD

LINE WIRE

STAY / CROSS WIRE

EDGE WIRE

2.24

2.50

2.90

WIRE DIAMETER (mm) ZINC COATING (g / m 2 )

Heavy Galvanised 10244 Class A or Lightly Galvanised 10244 Class D

4.2

2.4

6.9

BREAKING STRENGTH (kN)

LIGHT DUTY

LINE WIRE

STAY / CROSS WIRE

EDGE WIRE

2.0

2.0

2.50

WIRE DIAMETER (mm) ZINC COATING (g / m 2 )

Lightly Galvanised 10244 Class D

3.3

1.5

5.1

BREAKING STRENGTH (kN)

*Available in 7 line and 10 line

HEIGHT (mm)

75 90 100

117

126

140

155

178

200

230

230

230

230

6 LINE WIRES 900mm HIGH (LIVESTOCK)

7 LINE WIRES 1130mm HIGH (LIVESTOCK)*

8 LINE WIRES 1150mm HIGH (LIVESTOCK)

9 LINE WIRES 980mm HIGH (LIVESTOCK)

10 LINE WIRES 1180mm HIGH (LIVESTOCK)*

13 LINE WIRES 1870mm HIGH (GAME / BOUNDARY)

14 LINE WIRES 2100mm HIGH (GAME / BOUNDARY)

16

HARD DRAWN AND RIBBED WIRE

HARD DRAWN AND RIBBED WIRE

Hard drawn wire of various chemical compositions are supplied in coils weighing approximately 300kg.

AVERAGE COIL GEOMETY (300kg COIL)

COIL HEIGHT (mm)

COIL OUTSIDE DIAMETER (mm)

COIL INSIDE DIAMETER (mm)

300 - 500

700

500

WIRE DIAMETER RANGE

MINIMUM WIRE DIAMETER (mm)

MAXIMUM WIRE DIAMETER (mm)

1.25 ± 0.02

5.60 ± 0.05

RIBBED WIRE

Ribbed wire are supplied in layer wound coils of which the coil weight varies between 500kg - 2000kg.

AVERAGE COIL GEOMETRY (1000kg COIL)

COIL HEIGHT (mm)

COIL OUTSIDE DIAMETER (mm)

COIL INSIDE DIAMETER (mm)

900

800

630

WIRE DIAMETER RANGE

MINIMUM WIRE DIAMETER (mm)

MAXIMUM WIRE DIAMETER (mm)

4.00 ± 0.05

12.0 ± 0.08

18

POSTS, STAYS AND GATES

POSTS, STAYS AND GATES

STANDARD POST

POST

WALL THICKNESS (mm)

LENGTH (mm)

FINISH

STAY

1800

1.60 / 2.00

2400

2.00 / 3.00

Painted or Galvanised

3000

2.00 / 3.00

3600

2.00 / 3.00

OVERHANG

SECURITY POST

SECURITY POST

*Security posts are made with a 400mm overhang.

WALL THICKNESS (mm)

LENGTH (mm)

FINISH

STAY

1800

1.60 / 2.00

Painted or Galvanised

2400

2.00 / 3.00

3000

2.00 / 3.00

20

POSTS, STAYS AND GATES

SECURITY

SECURITY

DOUBLE

PEDESTRIAN / SINGLE

HOMESTEAD

HOMESTEAD

DOUBLE

PEDESTRIAN

HEIGHT (mm)

WIDTH (mm)

900 3000 3600 900 3000

1800

SECURITY

1200

HOMESTEAD

1800

3600

HEIGHT (mm)

WIDTH (mm)

HEAVY DUTY / MEDIUM DUTY

900

1200

2400

FARM GATE Available in Light Duty / Heavy Duty

1200

3000

3600

4200

4800

SINGLE

OTHER PRODUCTS

BUILDING TRESTLES

PALISADES

RAZOR WIRE

FLAT WRAP

BARBED TAPE CONCERTINA

NEWCASTLE DROPPER

RIDGEBACK DROPPER

Y-STANDARD

K-STANDARD

SQUARE TUBING

LIP CHANNEL TUBING

ROUND TUBING

ROUND TUBING

22

Scaw Metals Group 3 Milner Street, Metro Township, Milner, Paarden Island + Directions

Mark Kroeger Tel: 060 985 1870 Email: [email protected]