Data Loading...

sale-of-surplus-220317

281 Views
120 Downloads
4.14 MB

RECOMMEND FLIP-BOOKS

Please bid on the following and e-mail your reply back to Michael Cvetic at [email protected] no later than 2:00 P.M. on Thursday, March 17, 2021.

Operating systems and all software have been removed from all computers.

Successful bidder(s) will be required to submit a certified or cashier’s check for the full amount awarded prior to pick up of equipment.

By submitting a bid, the bidder is committing to providing payment within seven days of successful notice. Successful bidder(s) shall sign a form indicating that they are taking possession of the equipment from CCAC. Successful bidders shall certify that equipment will not be disposed of in any illegal manner.

Bidders may bid on any or all lots/items.

Bidders whom may have bid on items in the past and not followed through with providing payment will not be considered.

No picking and choosing of specific units will be permitted.

Equipment is to be sold as is. The College does not warrant that equipment is in any particular state of working condition (or that any particular operating system installed by the buyer will be compatible).

Successful bidder(s) will be required to remove equipment at their own expense. If special arrangements for palletizing and pick-up of equipment are required, successful vendor(s) shall provide labor, materials, and equipment and incorporate such costs in their bid. It is highly recommended that bidders view lots/equipment and their locations prior to submitting a bid . Bidding without viewing lots will be done so at the bidders’ own risk.

Continued

COMMUNITY COLLEGE OF ALLEGHENY COUNTY REQUEST FOR QUOTATION 220317 SALE OF SURPLUS PCS, LAPTOPS, MONITORS, MISC. NETWORK GEAR, AND MISC. NON-FUNCTIONING IT EQUIPMENT; TVs; EXERCISE EQUIPMENT; WELDING EQUIPMENT Payment is to be made by successful bidder(s) within seven days of notice by CCAC. Failure to provide payment within seven days will result in the rejection of your offer and re-awarding to the next highest bidder. This will be strictly enforced.

All items are to be removed within seven days after payment is received by CCAC.

Technical support will not be available from CCAC for any units sold.

Section 1 will be awarded to the highest bidder and sold in their entirety.

Bidders who prefer to submit a sealed bid may do so by delivering their response (by the due date and time) to Mike Cvetic, CCAC Purchasing Department, 800 Allegheny Ave., Pittsburgh, PA 15233. Clearly mark in the lower left corner of the envelope: “Sealed Bid – Surplus – RFQ 220317 ”. Sealed bids will not be opened prior to the due date and time.

CCAC WILL HAVE THE RIGHT TO REJECT ANY OR ALL BIDS RECEIVED OR ANY PART THEREOF.

To view computers or for technical questions, please call Megan Rice at 412-237-3127 or ([email protected]).

For Procedural questions, contact Mike Cvetic at [email protected].

Computer equipment will be palletized and shrink-wrapped.

A truck with a lift gate is necessary, as some locations do not have a dock and we do not have the fork lift available. Maps for the exact locations are linked below.

CCAC Location Addresses: Boyce Campus, 595 Beatty Road, Monroeville, PA 15146 Pickup Location: South Wing Entrance (not the main entrance) - map Notes: No dock. Lift Gate needed. North Campus, 8710 Perry Highway, Pittsburgh, PA 15237 Pickup Location: Back of the building - map Notes: Location does have a dock, but the truck must be less than a 40’ semi.

South Campus, 1750 Clairton Road, West Mifflin, PA 15122 Pickup Location: Library Building (L Wing) - map Notes: No dock. Lift Gate needed

Allegheny Campus, 808 Ridge Ave., Pittsburgh, PA 15212 Pickup Location: Library Building - map Notes: Location does have a dock, so the truck can back into the dock and load the pallets. Truck height is limited by the bridge on that road. Call in advance as there is significant construction in the area.

Office of College Services, 800 Allegheny Ave., Pittsburgh, PA 15233 Notes: Loading Dock is available. A smaller truck is recommended as it can be difficult to swing into the dock from the street.

West Hills Center, 1000 McKee Road, Oakdale, PA 15071 Notes: Location does have a loading dock.

Operating systems and all software have been removed from all computers.

Section 1 – Entire lot of PCs & Laptops (90 items), Functional Monitors (63 items), Functional Misc. Network Gear (759 items), Non-Functional IT Equipment (214 items). Bidder must bid on and remove all equipment as noted on the accompanying spreadsheet (four tabs). Section 1 to be sold in its entirety (see accompanying spreadsheet), located at various locations as noted.

Lump Sum Bid: $___________________ for entire lot - Section 1

Section 2 – Televisions

Location: Allegheny Campus, 808 Ridge Ave., Pittsburgh, PA 15212

Samsung UN40J5200, SN 04MM3CEH317391V

$____________

Samsung UN40J5200, SN 04MM3CEH317368N

$____________

Sharp LC-C5255, SN 810835737

$___________

Sharp LC-C5255, SN 811844073

$___________

Grand Total for all: $___________

For questions on computers, contact Megan Rice at [email protected].

Company/Individual Submitting Bid:_______________________________________

Contact Person:__________________________ Phone Number:__________________

E-mail address: ____________________________________

Section 3 – WELDING EQUIPMENT (see photos below) Locations: West Hills Center,

For questions on the pallet jack, contact Mike Baret at 412-788-7372 or [email protected]. Bid on any or all units. May be awarded on an item-by-item or total high bid basis.

Lincoln Electric Precision TIG 275

1. Non-working Lincoln Electric Precision TIG 275 Serial Number U1101008504

$_____________

2. Non-working Lincoln Electric Precision TIG 275 Serial Number U1101008501

$_____________

3. Non-working Lincoln Electric Precision TIG 275 Serial Number U1101008497

$_____________

4. Non-working Lincoln Electric Precision TIG 275 Serial Number U1040512178

$_____________

Lincoln Electric Power MIG 350

5. Non-working Lincoln Electric Power MIG 350 Serial Number U1060807629

$_____________

6. Non-working Lincoln Electric Power MIG 350 Serial Number U1060806563

$_____________

Lincoln Electric PRO CUT 55

7. Non-working Lincoln Electric PRO CUT 55 Serial Number

U1060708023

$______________

8. Non- working Lincoln Electric PRO CUT 55 Serial Number

U1060708025

$______________

Miller Welders

9. Non-working Miller Side Kick Strick Welder Serial Numbers JJ457829

$______________

10. Non-working Miller Side Kick Strick Welder Serial Numbers

JJ498639

$______________

11. Non-working Miller 22A 24V Wire Feed Serial Numbers

LC123828

$______________

Grand Total for all: $___________

Company/Individual Submitting Bid:_______________________________________

Contact Person:__________________________ Phone Number:__________________

E-mail address: ____________________________________

Welding Equipment from section 3 – other photos available upon request to [email protected] .

Section 4 – Exercise Equipment (see photos below) Location: South Campus, 1750 Clairton Road, West Mifflin, PA 15122 For questions, contact Courtney Coyne at 412-469-4309 or [email protected]

Bid on any or all units. May be awarded on an item-by-item or total high bid basis.

1. Star Trac Pro Recumbent Bicycle. Model no. 6430

$_____________

2. Star Trac Pro Treadmill. Model no. 7631

$_____________

3. Body Solid Standard Weight Plates Tree. Model no. SWT14

$_____________

4. Cybex Modular Assisted Chin-up & Dip Assist. Model no. 5345-91

$_____________

5. Star Trac Natural Runner Pro Elliptical Plus. Model no. 5230

$_____________

6. Cybex Adjustable Decline Bench. Model no. 5445

$_____________

7. Paramount Adjustable Olympic Bench Press. Model no. PL-2600

$_____________

Grand total for all:

$_____________

Company/Individual Submitting Bid:_______________________________________

Contact Person:__________________________ Phone Number:__________________

E-mail address: ____________________________________

Star Trac Pro Recumbent Bicycle. Model no. 6430

Star Trac Pro Treadmill. Model no. 7631

Body Solid Standard Weight Plates Tree. Model no. SWT14

Cybex Modular Assisted Chin-up & Dip Assist. Model no. 5345-91

Star Trac Natural Runner Pro Elliptical Plus. Model no. 5230

Cybex Adjustable Decline Bench. Model no. 5445

Paramount Adjustable Olympic Bench Press. Model no. PL-2600