Data Loading...
SyncroFlo Industrial_lr
166 Downloads
167.92 KB
Twitter Facebook LinkedIn Copy link
RECOMMEND FLIP-BOOKS
SyncroFlo EWS
ANSI 61 & 372 standard to have the low led certification for potable water. Control panels are assem
SyncroFlo IronHeart_PR
ANSI 61 & 372 certified • Annex G and 372 with NSF 61 • 100% flanged construction “THE THREAD IS DE
SyncroFlo Thrustream
or UL standards • In compliance with NFPA 20 DISCHARGE & PERFORMANCE  • 2.5 in to 12 in • Output
SyncroFlo Industrial_2_lr
High Temperature Designs • Hydronic Accessories • Variable or Constant Speed • NDE Testing •
SyncroFlo IronHeart_LT
ANSI 61 & 372 certified • Annex G and 372 with NSF 61 • 100% flanged construction “THE THREAD IS DE
SyncroFlo Turbostream
UL Vertical Turbine range of pumps approved for industrial, commercial and municipal applications. W
SyncroFlo Instream
351M CF8M stainless steel. Vertical mounting results in compact pumpset, saves almost 70% of floor s
SyncroFlo IronHeart_PR
ANSI 61 & 372 certified • Annex G and 372 with NSF 61 • 100% flanged construction “THE THREAD IS
SYncroFlo HVAC
ANSI 61 & 372 standard to have the low led certification for potable water. Control panels are assem
SyncroFlo EWS_lr
SyncroFlo EWS_lr PLUMBING SYSTEMS EMERGENCY WATER SYSTEMS FOR WHERE IT REALLY MATTERS Norcross based
INDUSTRIAL SYSTEMS COOLING WATER CIRCULATION, HEAT TRANSFER & GENERAL PLUMBING
FOR WHERE IT REALLY MATTERS When installing a pumping system in an Industrial
QUALITY CONTROL AND TESTING! SyncroFlo’s quality control program is on the leading edge of technology for our industry. Each system is tracked at all stages of manufacturing, assembly and testing with web based reporting via hand held devices. All welding is performed by AWS or ASME certified welders. Once manufacturing and assembly are complete, the system is connected to our NIST certified test stand. We then hydrostatically test and flow test from zero to 100% of design and under specified suction and net delivery pressures. Once on site, your only surprise is how easy the system is to startup and commission.
environment it is essential that the plant stay in production. Redundancy must be designed into every function to insure this. This is a problem in the industry. Most pump system companies are not dedicated enough to take ownership of the special needs that manufacturing plants have. But if this is not done the plant will suffer the loss. Also, the pumping systems that go into the plants are not cost effective. Through the constant running of improper pumping solutions the plant manufacturer will have to suffer lost energy efficiency through the life of the pump. At Syncroflo these issues disappear. Our staff is dedicated in building in all the necessary precautions needed to make sure that your plant will not need to shut down. We are dedicated to providing a product that has redundancy in every function so that your plant stays on line and operational. Your peace of mind is our mission.
INDUSTRIAL - COOLINGWATER CIRCULATION, HEAT TRANSFER & GENERAL PLUMBING
SyncroFlo, Inc.
2905 Pacific Drive Norcross, GA 30071 Tel: (770) 447-4443 www.syncroflo.com
INDUSTRIAL - COOLINGWATER CIRCULATION, HEAT TRANSFER & GENERAL PLUMBING
PUMP TYPES Close Couped End Suction, Flex Coupled End Suction, Vertical Inline, Hoizontal Split Case & Vertical Turbine
FEATURES • UL QCZJ Listed • UL 508 Controls • Carbon Steel Piping to ASME B31.1 & B31.3 • Custom Pipe Welding Procedures (in Accordance with ASME) • High Pressure/High Temperature Designs • Hydronic Accessories
• Variable or Constant Speed • NDE Testing • Coating Systems for Any Environment • Environmental Enclosures • Web-Based Controls
PERFORMANCE  • 2” - 24”Discharges • Flows to 10,000 GPM • Heads to 400 PSI
INDUSTRIAL - COOLINGWATER CIRCULATION, HEAT TRANSFER & GENERAL PLUMBING