VisionAR Technical Specification

VisionAR Technical Specification

VISIONAR Technical Specifications

The first and only augmented reality safety glasses

Univet’s Test Center is an highly innovative laboratory with specialized technicians and sophisticated machinery. Inside the lab we run all the the endurance tests required by the EN166 and ANSI Z87.1 standards. VisionAR has passed very stringent tests such as the impact test at speeds that go from 162km/h (101,25 mph) to 684km/h (427,5 mph). This highly-demanding stress and optical quality tests, allow this augmented safety glasses to be far above other products on the market.

SAFETY COMPLIANCE The first and only tested and certified with EN166 and ANSI Z87.1 standards for industrial use (impact test picture below).

SEE THROUGH With VisionAR, all information is available directly in the user’s field of view, who no longer has to look away from the activity and can read all important information at any time.

WORK SHIFT VisionAR is a personal protective device, it means that all parts that are in direct contact with the user can be easily disconnected from the optical module.

www.univetar.com

GLASSES Technical Specifications

Physical Characteristics Weight

90 g

Ruggedization

2 meter drop, EN166/EN170/EN172, ANSI z87.1+, STANAG compliant Adjustable nose pads and durable frame fits Western and Asian face 3 axis Adjustable AR display (pivoting) Can be perfectly worn over prescription glasses -5º to 55º C humidity 20 to 50% (no condensation) -10º to 60º C, humidity 10 to 90% (no condensation)

Fit

Ophthalmic correction Operating temperature Storage temperature

Water resistant

IP54 splash proof

Lens

Anti glare coating in and out, available in clear, gradient and smoke versions Wraparound polycarbonate lens with integrated side shields Transmittance >74%

CONTROL UNIT Technical Specifications

ADJUSTABLE DISPLAY

OVERSPEC

CAPACITIVE TOUCH AREA

EXPANSION HUB

Optics - SONY SED-100A holographic waveguide display specifications Display Type Monocular see-through holographic waveguides Field of View Diagonal 20° (Horizontal 19° x Vertical 6°) Display Resolution 419 (H) x 138 (V) pixel Image color 8 bit monochrome green scale Brightness (max) 2000 nits Light Transmission More than 85% see-through transmittance Frame Rate 90fps Holographic Density >2.5k radians (light points per radian) Eye-based Rendering Display optimization for 3D eye position

Wi-Fi

BLUETOOTH

GPS

HOT SWAP BATTERY

Multimedia Front Camera

MICRO SIM

GSM 3G

5 MP, Fast Auto-Focus Optical Image Stabilization

LED

Status LED, RGB programming

Video capture

Up to 720p @30fps

Core Platform Operating System CPU Chipset/SoC

ToF Sensor

Time of Flight Sensor included for gesture control

Android 6/Linux 4.11

Quad-core: NXP IMX6Q @ 800MHz

Connectors USB Port USB Expansion HUB

Memory

Up to 2GB RAM

Type C

External Memory

MicroSD card slot Included, (max 256GB)

USB 2.0 / I2C Serial Communication Port with option to attach accessories such as Camera, Infra Red camera, Temperature, VOC and Barometer sensors

Navigation Controls Buttons

4 configurable control buttons

Navigation Controls Touchpad

Connectivity & Sensors Bluetooth

1 Axis touch pad Hand tracking / gesture recognition. Available with VisionAR smart camera

BT 4.1 LE (Low Energy)

Wi-Fi GPS GSM

802.11 a/b/g/n/ac – 2.4GHz

Available Included

Sensor Compass

Included

Battery Main battery

IMU

9-DOF (Degrees of Freedom) includes 3-axis accelerometer magnetometer, and gyroscope, with software enhanced stabilization, ideal for head tracking

4000 mAh Li-Ion, rechargeable and field swappable 500mAh supports hot swapping of external batteries 4000 mAh Li-Ion, rechargeable and field swappable (included)

Internal battery

Additional Spare battery

Sensor Systems

Ambient Light Sensor Included and adjustable

Battery Life

Full shift (9 hrs) with typical use

Vibration

UNIVET SRL Via Giovanni Prati, 87 - 25086 Rezzato (BS) Italy +39 030 2499411 · [email protected]

www.univetar.com