Apollon Group - Ockwells Marine Brochure 2022

Apollon Group - Ockwells Marine Brochure 2022

Suppliers of temporary site protection materials to the marine industry

Protecting your investment

Ockwells are leading suppliers of quality flame retardant temporary protection materials with over twenty years experience in the building and maritime industries. We work closely with our clients to meet their rigorous demands for protection materials used in dry-docking, newbuild, re-fit and on-the-run repair works. Standards & Approvals We have made significant investments in Wheelmarked, Warrington Certifier (TS63) BRE (LPS1207) and Lloyds Register accreditations on our flame retardant products to give you peace of mind when specifying and using our products. We are also members of the British Marine Federation. We provide temporary marine protection materials for all types of interior and exterior finishes including decking, carpeted and hard floor areas, walls, doors and hatches, furniture and fittings. Damage to high specification finishes are costly to repair or replace and this can lead to contract delays. Exova WarringtonFire and BRE Global Ltd have the backing of The Association of British Insurers and the Chief Fire Officer’s Association known as the “Joint Code of Practice”. Exova also have an approved EU Marine Equipment Directive (Wheelmark) scheme, with which a number of our products are certified. Use of non-Certifire or LPCB products may invalidate Insurance Policies for construction sites, the use of Ockwells certificated products offers confidence to both the installer and end client. Stock & Service All Ockwells branches carry extensive stocks of Temporary Site Protection products, experienced personnel are on hand to offer technical assistance and advice where required, including site visits. Ockwells offer a rapid nationwide delivery service using a dedicated transport fleet to ensure timely deliveries to site, usually within 48 hours. The product range is continually expanding, for the latest product updates and information please visit our website at www.ockwells.co.uk and www.ockwellsmarine.com. Printable Heavy Duty Non-Certified FR

• Many products in our range are certified to the EU Marine Equipment Directive (Wheelmark), Exova WarringtonFire TS63 / TS64 and BRE Global Ltd standards LPS 1207 / LPS1215 • Certified products under MarED are also recognised under the equivalent US Coast Guard accreditation, as set out in the 2004Mutual Recognition Agreement • Failure to comply with the “Joint Code of Practice” or Wheelmark Directive could invalidate your insurance cover • Flame Retardant product must be printed with the relevant certification and certificate number

Flame retardant products should be used on all maritime building or renovation projects to comply with your insurance policy. Failure to use certified products or non-compliance with the guidelines set out by the EUMarine Equipment Directive 1/3.18a (or equivalent US Coast Guard accreditation) could invalidate your insurance. If in doubt check with your insurance company or fleet operator.

Ockwells Icon Key:

Non-Certified FR

Heavy Duty

Printable

Spill Resistant

100% Recycled

LPS1207 Cert/LPCB ref. 0000

Spill Resistant

100% Recycled

Low Slip Risk

Impact Resistant

Safety Products

Wheelmarked Products

Contents

Floor & Deck Protection Carpet Protection Film Flame Retardant........................ 3 Carpet Protection Film Dispenser. ................................ 3 CheckerTile. .............................................................. 8 FleeceShield.............................................................. 7 FloorShield Flame Retardant. ....................................... 6 Hard Surface Protection Film . ...................................... 4 Megafilm .................................................................. 6 Overshoes................................................................. 9 Overshoes Dispenser.................................................. 9 ProShield. ................................................................. 7 Protection Film Dispenser............................................ 4 TecDura Stickymat LD.................................................. 8 TwinShield Flame Retardant ......................................... 5

Dust/Dirt Protection Bubble Wrap Flame Retardant.....................................15 Furniture Bags...........................................................15 Polythene Films.........................................................14 Tack Mats. ................................................................15

Stair Protection PVC Stairtread Protector.............................................16 Twinshield Stairtread Protector....................................16

Adhesive Tape 3M Blue Masking Tape...............................................18 3M Yellow Masking Tape............................................18 Double Sided Gaffer Tape...........................................17 Easi-Peel Vinyl Tape....................................................17 Flooring Tape ...........................................................17 Gaffer Tape . .............................................................17 Gaffer Tape FR...........................................................17 High Tack PVC FR Tape...............................................17 Industrial Cleaner. .....................................................18 Accessories Alpha Maritex. ......................................................... 20 Debris Netting. ........................................................ 20 RAMS Boards........................................................... 22 Scaffold Sheeting. .....................................................21 Scaffold Toggles & Anchor Straps................................21

Glass Protection Glass Protection Film .................................................10 Hard Surface Protection Film . .....................................10

Door Protection Door Sleeves Flame Retardant .................................... 11 Door Sleeves Print Clear . ........................................... 11 Foam Protection for Doors & Pillars. .............................12 TwinShield Door Protection FR. ...................................12

Internal Protection Edgeguards..............................................................13 Foam Handrail Protection. ..........................................13

Carpet Protection Film Flame Retardant (Wheelmarked)

Carpet FilmDispensers • 600mm wide single handle for standard 600mm rolls • 2 handle dispenser to accommodate roll widths of 800mm, 900mm and 1200mm rolls • Applying carpet film using a dispenser reduces application time for large areas

Developed to protect carpets during any new build, dry dock refit and on the run maintenance projects. Manufactured from heavy duty flame retardant polythene film with a special low tack adhesive back, Flame Retardant Carpet Protection Film is certified to the Marine Equipment Directive (Wheelmark). Designed to protect carpets on floors, steps and stairs on a temporary basis without creating trip hazards, unlike the traditional method of using dust sheets. Ockwells Self Adhesive Flame Retardant Carpet Protection Film should only be used to protect carpet for up to 4 weeks. Because there are many variations in carpet fibres and installation methods, the user should test the suitability of the carpet protection film in an unexposed area.

Except LD

Low Slip Risk Impact Resistant cert no.1121/11

Safety Products LPS1207 Cert/L CB ref. 0000

LPS1207 Cert/LPCB ref. 0000 1 15 rt/ r f.

LPS1215 Cert/LPCB ref. 0000 ProductCertified TS63 CertificateNo

ProductCertified TS63 CertificateNo. 000

ed FR

Non-Certified FR Heavy Duty

Heavy Duty Printable

Printable Spill Resistant

Spill Resistant 100% Recycled

100% Recycled Low Slip Risk

Impact Resistant Safety Products

Description & Code Dimensions Flame Retardant Embossed - 10065568 600mm x 100m Flame Retardant Embossed - 10065579 800mmx 100m FlameRetardant Embossed - 10065569 1200mmx 100m

Description & Code Dimensions CarpetFilmDispenser-10065574 600mm Carpet FilmMulti SizeDispenser - 10065576 800mmto 1200mm

3

Floor & Deck Protection

Hard Surface Flame Retardant Protection Films Ockwells Hard Surface FR Protection Film is fully certified to the Marine Equipment Directive (Wheelmark). Ockwells Flame Retardant Hard Surface Protection Film has been developed to protect hard floors in areas under construction and refurbishment. This protection is manufactured from flame retardant polythene film with a special low tack adhesive back that is designed to protect hard surfaces on a temporary basis without leaving a residue. Ideal protection for floors, walls, both internal and external glazing, galley units, worktops and most non-porous surfaces during ship construction or refurbishment.

cert no.1121/11

Safety Products LPS1207 Cert/L CB ref. 0000

LPS1207 Cert/LPCB ref. 0000 1 15 rt/ r f.

LPS1215 Cert/LPCB ref. 0000 ProductCertified TS63 CertificateNo

ProductCertified TS63 CertificateNo. 000

ertified FR

Non-Certified FR Heavy Duty

Heavy Duty Printable

Printable Spill Resistant

Spill Resistant 100% Recycled

100% Recycled Low Slip Risk

Low Slip Risk Impact Resistant

Impact Resistant Safety Products

Description & Code Dimensions Hard Surface Film FR TS63 - 10065771 600mm x 100m ProtectionFilmDispenser - 10065574 600mm

4

TwinShield Manufactured from twin wall polypropylene board that is tough, durable, impact and chemical resistant, non-toxic and waterproof. TwinShield does not stain and is suitable for all round protection. • Available in LPS 1207 FLAME RETARDANT to alleviate the increased concern about the role of combustible materials fuelling major fires • Ideal for use as general deck, floor, door and bulkhead protection against impact and scuff damage • The LPCB logo and registration number are printed on every sheet of the product for ease of compliance identification • Simply and quickly cut, curved or creased, lightweight and easy to position • TwinShield should be laid print side up • Can be custom printed

100% Recycled LPS1207 Cert. 341a-x1/01 742a-x1/01 688a-x2/01

Non-Certified FR

Heavy Duty

Printable

Spill Resistant

Low Slip Risk

Im

Description & Code

Dimensions

Thickness

Colour

TwinShield FR - 10556395/ 10065700/ 10065702

2400 x 1200mm 2400 x 1200mm

2mm B&T, 3mm T Black/Translucent

TwinShield FR - 10065681/ 10065683

4mm, 4.5mm

Translucent Translucent

TwinShield Roll FR - 10065678

1200mm x 75m Rolls

2mm

5

Floor & Deck Protection

FloorShield Flame Retardant (FR) FloorShield Flame Retardant is a breathable temporary floor protection material manufactured which is from spun-bonded polypropylene.

MegaFilm MegaFilm protection materials are available in STD and LPS 1207 spanning a range of protection applications from heavy duty site conditions though to protection from dust, debris and liquid spills. • Flame Retardant grades are manufactured and certified under the Loss Prevention Certification Board (LPCB) approve scheme • All grades give a high degree of slip resistance in accordance with COSHH, HSE recommendations • MegaFilm products are backed by MegaFilm technical support. For details on specific uses please see our website

• Fully accredited to LPS 1207 • Complying with fire regulations associated with temporary protection materials • Uses include temporary internal protection from foot traffic on laminated flooring,

screed & coated concrete, terrazzo and carpeted floors and can also be used for worktop protection

LPS1207 Cert. 521a/01

Safety Products LPS1207 Cert/L CB ref. 0000

LPS1207 Cert/LPCB ref. 0000 1 15 rt/ r f.

LPS1215 Cert/LPCB ref. 0000 ProductCertified TS63 CertificateNo

ProductCertified TS63 CertificateNo. 000

uty

d FR

Heavy Duty Printable

Impact Resistant Safety Products Description & Code Dimensions Dust cover (Green) - 10065625 1.5m x 167m (250m 2 ) Carpet Protector (White) FR - 10065626 1.5m x 100m (150m 2 ) Marine Grade (Blue) - 10065623 1.0m x 100m (100m 2 ) Marine Grade (Blue) - 10065624 1.5m x 100m (150m 2 ) Printable Spill Resistant 100% Recycled Low Slip Risk Spill Resistant 100% Recycled Low Slip Risk Impact Resistant

LPS1207 Cert. 726a-x1/01

Description & Code Dimensions FloorShield FR - 10065587 1m x 100m Printable Heavy Duty Spill Resistant Non-Certified FR

100% Recycle

6

ProShield Flame Retardant Manufactured from a durable, waterproof and flame retardant woven polyethylene, for use in a wide range of covering applications. Certified flame retardant to TS63. • Primarily used to protect carpet, vinyl and other hard flooring in construction and renovation projects within the marine industry • Rip proof and puncture resistant laminated structure • Low risk of slip and waterproof makes ProShield suitable for use in areas with heavier foot traffic • Any spillages should be dealt with immediately to avoid any potential risk of slip or falls • Wider rolls make it easier/quicker to cover large areas • Lightweight for ease of use on site and 100% recyclable • Custom printing available subject to minimum order quantity

FleeceShield Flame Retardant Semi-adhesive non-woven fleece which can be used to protect newly installed hard floors and horizontal surfaces from construction damage, dirt and spills. • The anti-slip coating on the FleeceShield range adheres to substrates without the risk of adhesive residue or transfer • Adhesive tapes can be used to fix FleeceShield more securely • FleeceShield is lightweight and easy to install • Impermeable to most liquids including water, paint and solvents • Also suitable for galley work surfaces and hobs • FleeceShield FR is certified to the IMOWheelmark

FR Only

Product Certified TS63 Certificate No. CF5484

Heavy Duty LPS1207 Cert/LPCB ref. 0000

Printable Safety Products LPS1215 Cert/LPCB ref. 0000 LPS1207 Cert/LPCB ref.

ProductCertified TS63 CertificateNo. 000 LPS1215 Cert/LPCB ref. 00

Spill Resistant LPS1207 Cert/LPCB ref. 0000

100% Recycled LPS1215 Cert/LPCB ref. 0000 ProductCertified TS63 tificateNo. 000

Low Slip Risk ProductCertified TS63 CertificateNo. 000

Non-Certified FR Low Slip Risk

Impact Resistant

Description & Code Dimensions ProShield FR - 10533753 2m x 50m ProShield FR - 10547666 2m x 100m Impact Resistant 0 Saf ty Products

Certified FR

Heavy Duty Non-Certified FR

Non-Certified FR Printabl Heavy Duty

Heavy Duty Spill Resistant Printable

Printable 100% Recycl d Spill R sistant

Spill Resistant Low Slip Risk 100% ecycled

100% Recycled Impact Resistant Low Slip Risk

Safety Products Impact Resistant

cert no.0098/16

Description & Code Dimensions FleeceShield FR - 10557347 1m x 50m - 10.5kg

7

8

Floor & Deck Protection

TecDura Stickymat LD Ockwells TecDura Stickymat LD is a revolutionary temporary protection in light duty coverings which can be used to protect a multitude of finished surfaces from construction damage and spills. • Self-adheres to surface, protecting it from dirt and debris • Multi-application product can be used on natural wooden floors, vinyl floors and sanitary ware, amongst many other internal surfaces including teak decking • Safer work site - non-slip and seamless covering

CheckerTile CheckerTiles are manufactured from ultra-heavy duty hard wearing PVC, embossed with a checker plate pattern providing a high level of slip resistance. The interlocking jigsaw design allows the tiles to be flexible and easy to fit. • Shock and noise absorbing and resistant to most acids and solvents • Made from 100% recycled PVC which is also 100% recyclable • Weather resistant for use outdoors • Easy to clean and can be pressure washed • Weight of tiles 6.8kg/m 2 • Tested up to 3.25 tonnes per tile

• Fast and easy application • Finished surface left clean

• Peel up removal • Flame Retardant • Protection for up to 9 months interior

Safety Products LPS1207 Cert/LPCB ref. 0000

LPS1207 Cert/LPCB ref. 0000 LPS1215 Cert/LPCB ref. 0

LPS1215 Cert/LPCB ref. 0000 ProductCertified TS63 CertificateNo. 0

ProductCertified TS63 CertificateNo. 000

on-Certified FR

Non-Certified FR Heavy Duty

Heavy Duty Printable

Printable Spill Resistant

Spill Resistant 100% cycled

Non-Certified FR n C i i 100% Recycled Low Slip Risk

Low Slip Risk Impact Resistant

Impact Resistant Safety Products

LPS1207 Cert. 1214a/03

Non-Certified FR Heavy Duty ea y D y Description & Code Dimensions CheckerTile - 10065643 14mm thick - approx. 500mm x 500mm Edge Strips black or yellow 14mm thick x 500mm

Safety Products LPS1207 Cert/L CB ref. 0000 rt/L ref. Impact Resistant

Description & Code Dimensions Stickymat LD - 10172343 1.04m x 50m (1.5mm thick) Impact Resistant Printable Heavy Duty 100% Recycled Spill Resistant Low Slip Risk Impact Resistant Printable 100% Recycled Spill Resistant Low Slip Risk Safety Products a esi t r ab % ecyc ed i l R s a w i s S et Pr Printable Heavy Du y 100% Recycled Spill Resistant Low Slip Risk Non-Cer ified FR

8

Floor & Deck Protection

Heavy Duty Non-Slip Overshoes Heavy Duty Non-Slip overshoes are made from Tyvek fabric. • Can be worn over shoes and work boots to protect carpets, laminate/ vinyl flooring and most other finished surfaces • Cost effective protection for finished surfaces, with one generous size fits all • Not suitable for use with overshoe dispenser • Heavy Duty overshoes have a non- slip sole which gives a longer use on site

Overshoes Overshoes are made from durable polythene. • Can be worn over shoes and work boots to protect carpets, laminate/ vinyl flooring and most other finished surfaces • Cost effective protection for finished surfaces, with one generous size fits all • Not suitable for use with overshoe dispenser

Automatic Overshoe Dispenser

The automatic dispenser is precision engineered to provide durability and reliability to dispense overshoes up to size 14 on shoes and up to size 12 Rigger boots. • Easy to use and reload with light, durable, non-staining and biodegradable overshoes • Textured to provide grip and prevent slipping even on polished surfaces – tested for slip resistance on all surfaces associated with the hospital environment • Dispenser comes with a free carry case, 100 overshoes and a one year guarantee

Non-Certified FR

Heavy Duty

Printable

Spill Resistant

LPS1207 Cert/LPCB ref. 000 100% Recycle

Printable Safety roducts LPS1207 Cert/LPCB ref. 0000

LPS1207 Cert/LPCB r f. 0000 LPS1215 Cert/LPCB ref. 0

LPS1215 Cert/LPCB ref. 0000 ProductCertified TS63 CertificateNo. 00

Description&Code Dimensions/perpack DispenserOvershoes-10066125 100pairs Refill - 10066126 100 pairs Impact Resistant Low Slip Risk Safety Products ProductCertified TS63 CertificateNo. 000

n-Certified FR Heavy Duty

Heavy Duty Printable

Printable Spill Resistant

Spill Resistant 100% cycled

100% Recycled Low Slip Risk

Low Slip Risk Impact Resistant

Non-Certified FR

Impact Resistan Safety Products

Heavy Duty

Spill Resistant

100% Recycled

Description & Code Dimensions HDOvershoes - 10066127 50 pairs per pack

Description & Code Dimensions Overshoes - 10066123 50 pairs per pack

9

10

Glass Protection

Hard Surface Protection Films Ockwells Hard Surface Protection Film is available in both STD and Certified TS63 Flame Retardant grades. Our Flame Retardant grade is full certified to the Marine Equipment Directive (Wheelmark). Both grades are ideal protection for floors, walls, both internal and external glazing, galley units, worktops, tiled surfaces, doors, laminate flooring, and most non-porous surfaces during ship construction or refurbishment. Standard Hard Surface Film is also available in a handy MultiMate size, ideal for use in compact areas.

Glass Protection Film Temporary protection for glazedwindows and doors available from stock in Standard, Heavy Duty and Flame Retardant versions. • Standard clear, Standard blue & Flame Retardant films can be used externally and internally for up to 6months • Heavy Duty clear film can be left in situ externally for up to 12months • Our Heavy Duty, Standard blue and Flame Retardant films are UV stable, reducing the affects of sunlight on internal surfaces

• Flame Retardant glass film is certified to TS63 • Glass Filmmay not be suitable for use on some coated solar control products, the

user should test the suitability of the film prior to use

Product Certified TS63 Certificate No. CF748

Impact Resistant LPS1207 Cert/LPCB ref. 0000

Non-Certified FR

Heavy Duty

Non-Certified FR Printabl

Heavy Duty Spill Resistant LPS1207 Cert/LPCB ref. 0000

Printable 100% Recycled LPS1215 Cert/LPCB ref. 0000 LPS1207 Cert/LPCB ref. 0

Spill Resistant Low Slip Risk

100% Recycled Impact sistant ProductCertified TS63 CertificateNo. 000

Low Slip Risk Safety Products

Sa C

ProductCertified TS63 CertificateNo. 000 LPS1215 Cert/LPCB ref. 00 Saf ty Products Description & ode Dimensions GlassProtectionFilm Clear STD-10066206/HD -10551498 500mmx100m Glass Protection Film FR - 10065771 600mm x 100m Glass Protection FilmBlue Standard - 10065769 600mm x 100m

cert no.1121/11

tified FR

Heavy Duty Non-Certified FR

Printable Heavy Duty

Spill Resistant Printable

100% Recycled Spill sistant

Low Slip Risk 100% Recycled

Impact Resistant Low Slip Risk

Safety Products Impact Resistant

Description & Code Dimensions Hard Surface Standard - 10065771 600mm x 100m Hard Surface FR TS63 - 10065769 600mm x 100m

10

Flame Retardant Door Sleeves Manufactured from fully accredited LPS 1207 polythene, Flame Retardant Door Sleeves allow all types of doors; single, double, standard and fire doors to remain in operation whilst preventing cosmetic damage. • Universal size, allows sleeves to be fitted to most metric /imperial doors • Fold surplus film over the door and secure with flame retardant tape to ensure a snug fit (see page 26) • Where impact resistance is needed, use with flame retardant door size TwinShield, bigger size for FR Doors

Standard Door Sleeves Door Sleeves allow all types of doors; single, double, standard and fire doors to remain in operation whilst preventing cosmetic damage. • Manufactured in a universal size, allows the sleeve to be fitted to most metric and imperial doors • Surplus film can be folded over the top of the door and should be secured with Ockwells tape or Easi-Peel to ensure a snug fit (see page 18) • Where impact resistance is needed, door sleeves can be used in conjunction with door size TwinShield sheets

LPS1207 Cert. 527a

LPS1207 Cert/LPCB ref. 0000

LPS1215 Cert/LPCB ref. 0000

ProductCertified TS63 CertificateNo. 000

Non-Certified FR

Heavy Duty

Printable

Spill Resistant

100% Recycled

Low Slip Risk

Impact Resistant

Safety Products

Description & Code Dimensions/per roll FR Door Sleeves - 10065886 2200 x 1100mm/20 FR Door Sleeves - 10557312 2200 x 1000mm/50

Non-Certified FR

Heavy Duty

Printable

Spill Resistant

100% Recycled

Description & Code Dimensions/per roll Door Sleeves - 10065884 2200 x 914mm/20

11

Door Protection

TwinShield Door Protection FR Manufactured from twin wall polypropylene board that is tough, durable, impact and chemical resistant, non- toxic and waterproof. • Available in STANDARD and LPS 1207 FLAME RETARDANT (see page 3), developed due to concerns of the role of combustible materials fuelling major fires • Meets stringent quality control of the LPCB, LPCB logo/reg. no. printed on every sheet, can be custom printed • Use on 1 or 2 sides of doors or in busywork areas

Flame Retardant Foam Protection can be used on internal or external door frames in highly trafficked areas as well as Pillars and Handrails to ensure that expensive finishes are not unnecessarily damaged. • Circular foam is supplied pre-scored to be easily opened up and wrapped around frames up to 265mm wide • Combinations of foam and TwinShield protection board and door sleeves can be used to protect doors and frames on one or both sides. Flame Retardant Foam Protection for Door Frames and Pillars

• Manufactured from highly visible orange foam flame retardant and certified TS63. • High level of impact resistance

Product Certified TS63 Certificate No. CF5032 Safety Products Low Slip Risk

Impact Resistant LPS1207 Cert/LPCB ref. 0000

Non-Certified FR

Heavy Duty

Non-Certified FR Prin able

Heavy Duty Spill Resis ant

Printable 100% Recycled

Spill Resistant Low Slip Risk

100% Recycled Impact Resistant

S

LPS1207 Cert. 341a-x1/01 742a-x1/01 688a-x2/01

Description & Code Dimensions Per Box Colour

LPS1207 Cert/LPCB ref. 000

LPS1207 Cert/LPCB ref. 0000

LPS1207 Cert/LPCB ref. 0000

LPS1215 Cert/LPCB ref. 000

LPS1215 Cert/LPCB ref. 0000

LPS1215 Cert/LPCB ref. 0000

ProductCertified TS63 Certificat No. 000

ProductCertified TS63 CertificateNo. 000

ProductCertified TS63 CertificateNo. 000

Non-Certifi d FR

Non-Certified FR

Non-Certified FR

Heavy Duty

Heavy Duty

Heavy Duty

Printable

Printable

Printable

Spill Resistant

Spill Resi tant

Spill Resistant

100% Recy led

100% Recy led

100% Recycled

Low Slip Risk

Low Slip Risk

Low Slip Risk

Impact Resistant

Impact Resi tant

Impact Resistant

Safety Products

Safety Products

Safety Products

Circular 114 FR TS63 - 10066167 114mm x 2m 11 per box Orange Circular 78 FR TS63 - 10065876 78mm x 2m 21 per box Orange Circular 48 FR TS63 - 10066486 48mm x 2m 35 per box Orange

Description & Code Dimensions TwinShield Door FR - 10065899 2m x 1m x 2mm

12

Internal Protection

EdgeGuards Edgeguards are manufactured from highly visible polyethylene foam, recycled laminated card or TwinShield doors, door frames, work top edges, columns and many other surfaces. • Foam or TwinShield EdgeGuards are ideal when cushioned protection is needed • Cardboard angles and U channels both have a tough surface that can withstand a high level of impact • TwinShield EdgeGuards are certified flame retardant to LPS1207 Heavy Duty Non-Certified FR board and provides effective temporary edge protection to

FoamHandrail Protection Ockwells handrail protection is pre-scored to wrap around existing posts with handrails attached providing full cover and a high level of impact protection. • Available in Circular Flame Retardant Foam Certified to TS63 (orange) and Standard U-Shaped Foam (blue) • Various sizes available please refer to table • Quick & easy to install • Easily cut to suit all situations on site • Reusable, versatile & economic protection.

Product Certified TS63 Certificate No. CF5032

Impact Resistant LPS1207 Cert/LPCB ref. 0000

Safety Products LPS1215 Cert/LPCB ref. 0000

LPS1207 Cert/LPCB ref. 0000 ProductCertified TS63 CertificateNo. 0

LPS1215 Cert/LPCB ref.

Non-Certified FR Prin able

Heavy Duty Spill Resis ant

Printable 100% Recycled

Spill Resistant Low Slip Risk

100% Recycled Impact Resistant

Low Slip Risk Safety Products

Description & Code

Dimensions

Per box Colour

LPS1207 Cert/LPCB ref. 0000 ProductCertified TS63 ificateNo. 0 0 Circular 48 FR TS63 - 10066486 Safety Products LPS1215 Cert/LPCB ref. 0000 Circular 114 FR TS63 - 10066167 Circular 78 FR TS63 - 10065876

114mm x 2m 78mm x 2m 48mm x 2m

11

Orange Orange Orange

21 35

LPS1207 Cert. 341a-x1/01 Low Slip Risk Safety Products

Impact Resistant LPS1207 Cert/LPCB ref. 0000

LPS1215 Cert/LPCB ref. 0000

ProductCertified TS63 CertificateNo. 000

avy Duty Resistant

Printable 100% Recycled

Spill Resistant Low Slip Risk

100% Recycled Impact sistant

Description & Code Dimensions Foam - 10066103 75 x 75 x 10mm x 2m Card - 10066099 50 x 50 x 4mm x 2m FR TwinShield -10066102 75 x 75 x 1500mm

U Profile 45/60 STD - 10065849

45-60mm x 2m

50

Blue

U Profile 80/100 STD - 10065854 U Profile 100/120 STD - 10065874

80-100mm x 2m

36

Blue Blue

100-120mm x 2m 22

13

Dust/Dirt Protection

Flame Retardant Polythene Films Manufactured to LPS 1207 and fully accredited flame retardant polythene sheet. Available in three grades for a wide range of uses. Heavy and medium grades can be used as temporary screen walls when used in conjunction with Ockwells props and zip doors. Medium and light duty can be used as covering materials to protect against dust contamination and spill and splash covers.

Zip Doors Zip strips are self adhesive backed and can be adhered to flame-retardant polythene.

Zip Doors can be used in pairs to form large access for trades and materials into work areas.

LPS1207 Cert. 499a/05

Non-Certified FR

Heavy Duty

Printable

Spill Resistant

100% Recycled

Low Slip Risk

I

Description & Code Colour Dimensions

FR Polythene - Light Duty - 10450327 (White) 4m x 50m Roll FR Polythene - Med Duty - 10066337 (White) 4m x 50m Roll FR Polythene - Heavy Duty - 10066327 (Orange) 4m x 25m Roll Zip Doors - 10066159 2m long, 2 zips

14

Dust/Dirt Protection

LPS1215 Cert/LPCB ref. 0000 Safety Products Description & Code Dimensions Small - 10065645 610mm x 910mm Medium - 10065646 1010mm x 910mm Large - 10065647 1520mm x 910mm ProductCertified TS63 CertificateNo. 000 LPS1207 /LPCB ref. 00 LPS1215 Cert/LPCB ref. 0000 Tack Mat - Heavy Duty Rubber Framed Heavy Duty Rubber Framed Mats are free standing multi-layered floor mats. • Layers are coated with a non- transferable resin, placing at an entrance to sensitive areas they compel pedestrian traffic to step-on and step-off the mat • The physical pressure of standing on the mat ensures that any loose particles on the soles of the shoe are detached remaining in the resin • Saturated layers are simply peeled away to reveal a new clean layer • Available in small, medium and large, each mat has 36 layers Printable Heavy Duty Spill Resistant Non-Certified FR

Furniture Protection Bags Generally used to protect furniture from damage and contamination in working areas such as lounges and bars. • These bags are waterproof, rip- resistant, lightweight and see- through • All three sizes of furniture bags are manufactured from 85 micron virgin grade polythene film with heat sealed joints • This style of bag is used by large furniture manufacturers and has successfully reduced their damage in transporting and storing all kinds of furniture Description & Code Dimensions Furniture Bag (Single) 1750mm(W) x 1675mm(D) x 1070mm(H) Furniture Bag (Double) 2250mm(W) x 1675mm(D) x 1070mm(H) Furniture Bag (Triple) 2766mm(W) x 1675mm(D) x 1070mm(H) Impact Resistant Low Slip Risk Safety Products Printable Heavy Duty Spill Resistant

BubbleWrap BubbleWrap is a general purpose bubble protection providing cover and impact protection in Standardgrade for domestic uses and Flame Retardant LPS 1207 for commercial uses. • Available in both 10mm and 30mm bubbles • Ideal protection for house builders, Kitchen fitters, packing and general protection • Suitable for use with Easi-peel, easy tear tape on finished surfaces (see page 25 tape section for further info). • Light Duty 10mm Bubble, Heavy Duty 30mm Bubble

Non-Certified FR

100% Rec

LPS120 Cert/LPCB re

100% Recycled

LPS1207 Cert. 505b

LPS1207 Cert/LPCB ref. 0000 Impact Resistant

ProductCertified TS63 CertificateNo. 000

ill Resistant eavy Duty

100% Recycled Printable

Low Slip Risk Spill Resistant

Impact Resistant 100% Recycled

Safety Products Low Slip Risk

Description & Code Dimensions

FlameRetardant - 10066072 1200mmx 100m

15

Stair Protection

1

PVC Stairtread Protector Ridged PVC Stairtread Protectors give an heavy duty cover and edge protection. Designed with an anti- slip ribbed surface and high visibility yellow which makes them ideal for both heavy duty applications on commercial stairs as well domestic timber stairs. Treads should be fixed firmly in place in both applications. Fix with screws and plug or with high tack resin tape (toffee tape) to concrete, screw or nail to timber treads. • High visibility yellow colour

TwinShield Stairtreads TwinShield Stairtreads provide temporary protection to treads and risers, ideal for protecting against foot traffic, maintaining a clean surface below. The 200mm width protects the tread and the 150mm folds down to protect the riser. • Offers water and slip resistance (it is recommended that any spillages are cleaned immediately to reduce any slip risks) • Easily cut to size with a knife • Manufactured from LPS1207 certified twin wall polypropylene

• Self extinguishing PVC • Quick and easy to install • Unique anti-slip design • Impact and scuff resistant.

LPS1207 Cert. 341a-x1/01

LPS1207 Cert/LPCB ref. 0000 Saf ty Products Low Slip Risk

LPS1215 Cert/LPCB ref. 0000 LPS1207 Cert/LPCB ref. Impact Resistant 0

ProductCertified TS63 CertificateNo. 000 LPS1215 Cert/LPCB ref. 0 00 Saf ty Products

ProductCertified TS63 CertificateNo. 000 LPS1207 rt/LPCB ref. 00

LPS1215 Cert/LPCB ref. 0000

ProductCertified TS63 CertificateNo. 000

Printable Heavy Duty

Spill Resistant Printable Non-Cer ified FR

100% Recycled Spill esistant Heavy Duty

Low Slip Risk 100% Recycled Printable

Impact Resistant Low Slip Risk S ill Resistant

Safety Products Impact Resistant 100% Recycled

LPS1 Cert/LPCB LP Cert/LPC

LPS1207 Cert/LPCB ref. 0000 Safety Products

Heavy Duty Non-Certified FR

Printable Heavy Duty

Spill Resistant Printable

100% Recycled Spill sistant

Low Slip Risk 100% Recycled

Impact Resistant Low Slip Risk

Safety Products Impact Resistant

Non-Certified FR

Description & Code Dimensions Stairtread - 10065867 750 wide x 210mm deep - 20 per pack Stairtread - 10065868 1500 wide x 210mm deep - 10 per pack

Description & Code Dimensions TwinShield Stairtread - 10065872 200mm x 150mm x 1200 mm

16

Ockwells Flooring Tape General purpose tape for jointing product to product. Can be custom printed. • Manufactured from very strong Polypropylene • Coated with pressure sensitive high tack solvent acrylic adhesive • Used as a general purpose tape and for jointing STD protection materials such as cardboard, plastic sheet and foam products. High Tack PVC Flame Retardant Tape Generally used in the construction industry for polythene jointing and shuttering tape. • Flame Retardant High Tack should be used for jointing of LPS 1207 flame protection materials. Manufactured from a plasticised polyvinyl chloride film and coated with an aggressive pressure sensitive rubber based adhesive.

Easi-Peel Vinyl Tape Standard and Flame Retardant Used to fix protection materials to non-porous surfaces without leaving a residue. Manufactured from plasticised polyvinyl chloride film and coated with a high quality adhesive. • Can be used on glass for up to 2 weeks and most other surfaces up to 4 weeks • Grooved surface across width allows tape to be torn without compromising lateral strength. Gaffer Tape,Doublesided&HeavyDuty Gaffer Tape Laminated waterproof polythene/cloth tape. Black/Silver or White. • Coated with an aggressive pressure-sensitive adhesive • Heavy duty, will seal protection materials to concrete and steel.

17

Adhesive Tape & Accessories

3M Blue 2090 Masking Tape Painter’s masking tape is designed for use on multi-surfaces with medium adhesion • Ideal for painted walls and trim, woodwork, glass and metal •Painter’s Tape features a crepe backing, meaning that it sticks smoothly and securely, even to curved or uneven surfaces •Tape removes cleanly for up to 14 days without causing surface damage or leaving residue, even when exposed to direct sunlight 3M Yellow 301E Masking Tape Adhesive tape for general use applications, offering good resistance to humidity and solvents •Can be used for clear delimitations, without accumulation of paint at edges •Will not tear when unrolled •Resistant to most paint solvents, protecting the masked surface •Prevents transfer of adhesive or residue once removed Description & Code Dimensions 3M Blue 2090 50mm x 50m 3M Yellow 301E 50mm x 50m

Industrial Cleaner Orange-based general purpose cleaner to remove adhesive and tape residue. • Offers a single solution to removing difficult substances such as non-curing adhesive tape residue, grease and dirt • Can be used on must surfaces and will remove most types of adhesive associated with adhesive tapes • We recommend a small test is carried out and left to dry completely before moving on to larger areas • Care should be taken to ensure that the cleaner is not used over joints in vinyl flooring as the cleaner could penetrate through to the adhesive underneath

Description & Code Dimensions Industrial Cleaner - 10065964 500ml

18

Adhesive Tape & Accessories

FR Only

Adhesive Tape Size Table

Non-Certified FR

Heavy Duty

Printable

Spill Resistant

100% Recy

Description

Roll Length

Rolls Per Box Sizes

Ockwells Flooring Tape - 10065935 Double Sided Tape - 10065917 Easi-Peel Standard Tape - 10065925 Easi-Peel Standard Tape - 10065926 Easi-Peel Standard Tape - 10065927 Easi-Peel FR Tape - 10065928/10065929 GafferTape-10065940/10065941/10065942 GafferTape-10065945/10065943/10065944 GafferTape-10065947/10065946/10065948

66m 50m 33m 33m 33m 33m 50m 50m 50m 33m 33m 33m 33m

36 24 18 12 12 16 12 18 12 12 24 24 16 12 12 12

50mm 50mm 50mm 75mm 100mm 50mm 75mm 100mm 50mm 75mm 100mm 50mm 50mm 75mm 100mm 50mm 50mm

18 & 12

50mm/75mm

50m

Available in Black, Silver or White

High Tack FR Tape - 10065960 High Tack FR Tape - 10065961 High Tack FR Tape - 10065961

Red &White or Yellow& Black

HazardWarning Tape - 10065952/ 10065953

Aluminium Foil Tape - 10065915 Aluminium Foil Tape - 10065916 Aluminium Foil Tape - 10065914 3m Blue 2090 Masking Tape 3m Yellow 301E Masking Tape

45.7m 45.7m 45.7m

50m 50m

19

Accessories

Alpha Maritex Ockwells Alpha Maritex materials provide reliable protection cover during any stage of build.

Debris Netting Manufactured from knitted fabric incorporating button-hole eyelets for easy installation and improving site safety by reducing the risk of small objects or tools falling outside the work area. • The open mesh construction reduces wind loading on scaffold structures • Available from stock in white FR (non-certified) Contact our sales offices for colour availability, subject to minimum order quantities.

Generally used to protect surfaces and equipment on site, can be used as welding blankets

This material provides excellent removable and reusable covers where water repellancy and heat reflection are of prime importance

Non-Certified FR

Heavy Duty

Non-Certified FR

Heavy Duty

Printable

Non-Certified FR

Non-Certified FR

Spill Resist nt

Heavy Duty

Heavy Duty

100% Recycled

Printable

Printable

Low Sli Risk

Spill Resistant

Spill Resistant

Impact Resistant

100% Recy led

100% Recycled

Safety Pr ducts

Low Slip Ri Low Slip Risk

Description & Code Dimensions Debris Netting White FR - 10066181 2m x 50m

Description & Code Dimensions Alpha Maritex 10523435 1270mm x 50m

20

Scaffold Toggles and Anchor Strap Ties Used for fastening Scaffold Sheeting, Vented Sheeting, Heras Banners and Debris Netting on vertical scaffold or Heras fencing. • Manufacturer’s recommendations should be followed when using elasticated toggles • Incorrect use can cause problems with wind loading

Scaffold Sheeting Generally used within the marine industry to protect the workforce and the surrounding environment when scaffold is erected. • Manufactured from reinforced low-density opaque flame retardant polythene sheeting • All grades incorporate strong reinforcing strips with pre-punched eyelets at close intervals for ease of fixing to traditional scaffold pole applications • Sheeting can be used as temporary screening on site compounds • Ockwells offer digital print on sheeting: any logo or design, no minimum order qty, contact one of our sales offices for further information

LPS1207 Cert. 527a ert.527c&d

LPS1207 Cert. 527a ert.527c&d

LPS1207 Cert/LPCB ref. 0000

LPS1215 Cert/LPCB ref. 0000

ProductCertified TS63 CertificateNo. 000

Non-Certified FR

Heavy Duty

Printable

Spill Resistant

100% Recycled

Low Slip Risk

Impact Resistant

Safety Products

Description & Code Dimensions

Description & Code Qty Per Pack Scaffold Toggles - 10066261 100 Anchor Strap Ties - 10066297 100

ScaffoldSheetingFRStripe-10066258 2mx45m ScaffoldSheetingFRSuperTPlus-10159407 2mx45m

21

Accessories

Your Logo Here

Site Set Up

Standard

Basic

RAMS Boards Ockwells RAMS Boards are designed to be a reusable solution for displaying statutory Risk Assessments and Method Statements to cover your legal obligations. • Manufactured from high grade HDPE, making RAMS Board easy to clean, 100% recyclable and reusable from site to site • Can be configured to suit the needs of individual sites, including additional protective pockets for day to day notes and documents • Cost effective method of displaying mandatory and critical information without the need to assemble a timber or plywood board • Each board includes two supports that can be anchored or filled with water for ballast • All units comply with “Wind Action” standard EN 1991-1-4:2005 • RAMS Boards can carry the following: - H&S, Risk Assessment and Method Statements documents - Fire point; Consumable PPE distribution point - First Aid or AED point - LEANManufacturing, 5S Board - Lockout, Tagout station Printable Heavy Duty Spill Resistant Non-Certified FR Non-Certified FR Non-Certified FR

LPS1207 Cert/LPCB ref. 00 Low Slip Ri Low Slip

100% Recycled Heavy Duty

H avy Duty

Low Slip Risk Pr ntable

Printable

Impact Resistant Spill Resistant

Spill Re istant

Safety Products

100% Recy led

100% Re ycled

Description & Code Version RAMS Boards - 10561747 Basic RAMS Boards - 10561745 Standard RAMS Boards - 10561744 Site Set Up

• Colours available:

22

For expert advice on Marine Protection Materials, contact Nigel Chubb on 01635 876336 or +44 7557 498847 Email: [email protected] For advice on other protection materials call one of our depots.

SOUTH Unit 6, Transigo Gables Way, Thatcham Berkshire RG19 4ZA T: 01635 876336 F: 01635 876338 [email protected]

NORTH Unit 29, Melford Court Woolston, Warrington

SCOTLAND 231 Maclellan Street Kinning Parkway Estate,

Cheshire WA1 4RZ T: 01925 820003 F: 01925 822050 [email protected]

Glasgow G41 1RR T: 0141 427 3366 F: 0141 427 8455 [email protected]

www.ockwellsmarine.com