BGB Wastewater brochure - Middle East Edition 2020

WASTEWATER SEWAGE TREATMENT: COLLECTOR COLUMNS

BGB - WASTEWATER SEWAGE TREATMENT

BGB have been designing and manufacturing slip ring collector columns for Half-bridge rotary scrapers and Clarifiers for many years. BGB were one of the first slip ring manufacturers to design and produce a slip ring collector column compliant to WIMES directive 2.01 section 6.12.2 for rotating half bridge scrapers. BGB is now a leading supplier in the development of collector column solutions for this unique industry and work with many of the major wastewater sewage treatment specialist such as: MWH, EPS, Veolia, Ovivo / Jacopa, Anglian Water and many more. The BGB range of SPB (Signal/Power/ Barrel) collector columns are robust, service friendly, enclosed slip rings, designed especially for the tough working environment of a scraper bridge.

POWER & SIGNAL TRANSFER UNITS:

SPB01

The SPB packaged units have been designed to provide an ideal method of transferring power or power and signals (including multiplexing), when using precious metal plated rings for low noise applications. Our standard range of slip rings and brushgear (up to a rating of 35 amps maximum continuous load per way, 690V a/c phase rings and 400V a/c earth/ground rings) can be accommodated, and the aluminium enclosure is fully dust and weatherproofed to I.P. 65, when the mounting flange is correctly sealed.

SPB01

SPB03

The SPB range all share a very similar specification in terms of conduit entries, torque arms and flanges. Optional extras are available on all versions, The all-insulated fibreglass reinforced polyester enclosure is light-weight, vandal proof and fully dust and weatherproofed to I.P. 65. The SPB03 collector column is compliant to WIMES directive 2.01 section 6.12.2 for rotating half bridge scrapers.

SPB03

SPB FULLYWIRED TERMINAL BOX:

Terminal Box - Top and Bottom Entry

The SPB Terminal Box is the latest WIMES compliant product to compliment the highly successful SPB range of collector column / slip ring units. Primarily used in the wastewater sewage treatment industry, the new terminal box minimises installation time and use of exterior electricians.

TOP ENTRY

The Terminal Box can be supplied with: · Load Monitoring Contactor for Bridge Drive Motor - To protect overload and underload currents (coil voltage required) · Manual re-set button · SWA cable glands · Rotor side SWA cable to customer requirement (to run down the bridge) · Incremental Encoder with own DC Power source - BGB standard version is capable of up to 256 pulses per revolution. Other standard ranges are 400, 512, 800 and 1024 (others available on request). · LOR (Loss of Rotation) sensor All subject to customer requirements.

BOTTOM ENTRY

WHY BGB?

BGB had previously been split into 3 divisions - BGB Innovation (UK Head Office), BGB Technology (USA) and BGB Discovery (R&D), and then further still with Engineering, Marine, Telemetry and SILS. We have now merged all BGB brands to form one BGB. This means whenever you see the BGB brand anywhere in the world you will have the same experience whether in terms of look, style and presence at shows, through to customer service, solution offering or high level of expectation.

What Do We Do?:

“We develop, design and manufacture total engineering solutions for service companies, distributors and OEMs”

Why Do We Exist?:

“To connect, inspire and work closely together so that we are proud of our achievements, community and shared success.”

* Full Technical specification available on BGB website: www.bgbengineering.com

5 9 22

6

COLLECTOR COLUMNS FOR HALF-BRIDGE SCRAPERS & CLARIFIERS:

Collector Columns / Slip Rings:

A BGB collector column / slip rings primary function is for the transfer of power & signal from stationary cables from the axis of rotation to the rotary scraper bridge. The slip ring transfers power to the scraper bridge drive motor and bridge mounted control panels to allow the scraper to travel continuously through 360 o .

The rings are usually phosphor bronze but can be silver, gold or rhodium plated. The number of rings required depends on client specification and are usually in multiples of two. Brushes are used on the rotational side of the unit, with the brush material being copper or silver graphite depending on application.

8

Mr Hyder Aswad

BGB Agent

Address :

SABA Trading Centre Building, Office 501,

Yajoose street, Amman, Jordan

Mobile : +962 797 424344

Email : [email protected]

NOTES:

Tel: +962 797 424344 Middle East

North & South America

Europe And Rest Of World

Tel: +1 804 451 5211

Tel: +44 ( 0 ) 1476 576 280

Twitter: @bgb_innovation

Email: [email protected]

www.bgbinnovation.com

BGB Engineering Ltd. Dysart Road, Grantham, Lincolnshire NG31 7NB UK © BGB Group (Revision HA - Updated 2020)