Johnsons Workwear - Protection Catalogue

Johnsons Workwear - Protection Catalogue

Protection

Anti-Static & Electro-Static Discharge FR Anti-Static Cleanroom Molton Metal Aramid Inherent FR Heat & Flame Chemical Splash Electric Arc High Visibility Multi-Protection Paintroom Protection | | | | |

V1.3-072022

TABLE OF

2

www.johnsonsworkwear.com

0800 592 254

CONTENTS

01 Protective Garments | Page 04 06 14

28

Anti-Static & Electro- Static Discharge Coats, polo shirt, trousers and t-shirts.

FR Anti-Static Coveralls, jackets, trousers, t-shirts and long johns.

Chemical Splash Coveralls, lab coats and coats.

34

40

54

Cleanroom Coveralls, boots and hoods.

Electric Arc Coveralls, jackets, trousers, shirts, polo shirts, t-shirts and long johns.

High Visibility Waistcoats, polos, coveralls, sweatshirts, jacket, vests and trousers. Gryko® garments.

82

86

104

Molton Metal Marlan jackets and trousers.

Multi-Protection Gryko®, Cantex, Tera, Tranemo and Edge. Coveralls, jackets and trousers.

Aramid Inherent FR Coverall Made From Aramid Comfort Ripstop.

108

110

Paintroom Protection Coveralls.

Heat & Flame Coveralls, hoods, jackets, trousers, shirts, polo shirts, t-shirts and longjohns. Gryko®, Weldpro, Flamepro and Magma products.

3

01

m Protect gar en

4

www.johnsonsworkwear.com

0800 592 254

Protective workwear encompasses a wide variety of garments. We have the ultimate range to keep you safe and seen.

tive nts

Section includes:

Anti-static & Electro- static Discharge

Molten Metal

Multi-protect

FR Anti-static

Aramid Inherent FR Paintroom Protection against Heat & Flame

Cleanroom Chemical Splash Electric Arc

Hi-Vis, Hi-Vis FR, Hi-Vis Multi-protect, Hi-Vis Waterproof & Hi-Vis Railway

5

01 PROTECTIVE WORKWEAR

ANTI- STATIC

Anti-static &

(ESD) Electro-static Discharge

6

www.johnsonsworkwear.com

0800 592 254

CURRENT EUROPEAN NORMS

EN 1149-1:2006: Protective clothing - Electrostatic properties - Part 1: Test methods for surface resistivity. EN 1149-3:2004: Protective clothing - Electrostatic properties - Part 3: Test methods for measurement of charge decay. EN 1149-5:2008: Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements. BS EN 61340-5-1:2007: Electrostatics - Protection of electronic devices from electrostatic phenomena. General requirements. (Test method IEC 61340-4-1)

FABRIC OPTIONS: ELECTRO-STATIC DISCHARGE

ElectroStatic Discharge (ESD) is a known cause of damage to sensitive electronic components during manufacture and handling and can cause failures to electronic systems during operation. Johnsons Workwear have a range of anti-static garments which are ideal for ungrounded applications where operators are manufacturing, assembling, installing or testing sensitive electronic equipment.

7

01 PROTECTIVE WORKWEAR

ANTI- STATIC

ANTI-STATIC ESD COAT

Concealed stud front fastening. Single breast pocket, 2 lower pockets. Plain hemmed sleeves with 1 stud adjuster.

Standards: EN 1149-3

BS EN 61340-5-1.

Weight:

175gsm

Fabric:

68% Polyester/ 30.5% Cotton/ 1.5%

Sizes:

S - 4XL Regular

Care:

Industrial Wash

Range:

Colour shown available from stock

8

www.johnsonsworkwear.com

0800 592 254

ANTI-STATIC ESD POLO SHIRT

Ribbed collar with 3 button fastening. 1 breast pocket. Hemmed sleeves

Standards: EN 1149-1

BS EN 61340-5-1.

Weight:

170gsm

Fabric:

98% Polyester / 2% Anti-Static

Sizes:

S – 2XL Regular

Care:

Domestic Wash

Range:

Colours shown are available from stock

9

01 PROTECTIVE WORKWEAR

ANTI- STATIC

ANTI-STATIC COAT

Concealed stud front fastening. Single breast pocket, 2 lower pockets. Plain hemmed sleeves with 1 stud adjuster.

Standards: EN 1149-3

Weight:

210gsm

Fabric:

64% Polyester/ 35% Cotton/ 1%

Sizes:

S - 4XL Regular

Care:

Industrial Wash

Range:

Colours shown are available from stock

10

www.johnsonsworkwear.com

0800 592 254

11

01 PROTECTIVE WORKWEAR

ANTI- STATIC

ANTI-STATIC TROUSER

Hook and bar fastening waistband with 7 beltloops. Metal zip fly. 2 side swing pockets in self fabric. One back hip pocket with Velcro fastening flap. 2 bellows thigh pockets with Velcro fastening flaps. Mobile phone pocket inside right thigh pocket.

Standards: EN 1149-3

Weight:

210gsm

Fabric:

64% Polyester/ 35% Cotton/ 1%

Sizes:

30 - 46 inch Regular Fits - 31 inch & Tall 33 inch

Care:

Industrial Wash

Range:

Colours shown are available from stock

12

www.johnsonsworkwear.com

0800 592 254

ANTI-STATIC ESD T-SHIRT

Knitted round neck collar. One breast pocket.

Standards: EN 1149-1

BS EN 61340-5-1.

Weight:

195gsm

Fabric:

51% polyester 48% Cotton 1% Anti-Static

Sizes:

S – 2XL Regular

Care:

Domestic Wash

Range:

Colours shown are available from stock

13

01 PROTECTIVE

WORKWEAR FR ANTI-STATIC

FR Anti- stat

14

www.johnsonsworkwear.com

0800 592 254

CURRENT EUROPEAN NORMS

EN ISO 11612 :2015 Protective clothing to protect against heat and flame. • Limited flame spread (code letter A). • Convective heat (code letter B). • Radiant heat (code letter C). • Molten aluminium splash (code letter D). • Molten iron splash (code letter E). • Contact heat (code letter F). EN ISO 11611 : 2015 Protective clothing for use in welding and allied processes • Limited flame spread (code letter A). • Impact of welding spatter (Class 1 or 2). • Heat transfer (Class 1 or 2). • Electrical resistance. EN 1149-5-2008 Protective clothing – Electro-Static properties. Material performance and design requirement. EN 61482-1-1: 2009 Test method – determination of the arc rating. (ATPV or EBT) EN 61482-1-2-2014 Test method – determination of arc protection class (Box test) Class 1 – 4KA / Class 2 – 7KA. IEC 61482-2-2009 Protective clothing against the thermal hazards of electric arc - requirements.

tic

FIRE RETARDANT ANTI- STATIC PERSONAL PROTECTION

FR Anti-Static is to be used in an area where there is a risk of hazardous sparks caused by electrostatic discharge that could result in fire and/or explosion. The Anti Static properties are there to reduce the build-up of Electrostatic Discharge. The fire retardant properties are there to protect the wearer against heat & Flame caused by Static build up. The Anti Static fabric used will always incorporate flame protection properties, either inherent or as a chemical finish.

15

01 PROTECTIVE

WORKWEAR FR ANTI-STATIC

FR ANTI-STATIC COVERALL

Concealed stud front fastening. 2 breast pockets with concealed stud fastening flaps. Set in sleeves. Action back and side waist elastication. 2 side swing pockets in self fabric with trouser access. Rule pocket to right leg FR reflective tape over shoulders around sleeves and legs.

Standards: EN ISO 11612:2015 A1, B1, C1, F1.

EN ISO 11611:2015 Class 1 A1.

EN1149-5:2008 EN1149-3:2004.

IEC 61482-2 Class 1 4kA / ATPV = 8.9cal/cm.

Weight:

290gsm

Fabric:

75% FR Cotton, 24% Polyester, 1% Anti-static, with FC finish to EN 13034

Sizes:

S - 4XL. Reg 29”, Tall 31”

Care:

Industrial wash. Special laundering conditions apply for garments with reflective tape Colours shown are available from stock

Range:

16

www.johnsonsworkwear.com

0800 592 254

TOP: Radio loop is positioned above the right breast pocket flap.

BOTTOM: Retro reflective tape is positioned around the sleeves and legs to give 360 0 visibility.

MODEL: Wears an FR belt.

17

01 PROTECTIVE

WORKWEAR FR ANTI-STATIC

FR ANTI-STATIC COVERALL

Concealed stud front fastening. 2 breast pockets with concealed stud fastening flaps. Set in sleeves. Action back and side waist elastication. 2 side swing pockets in self fabric with trouser access. Rule pocket to right leg.

Standards: EN ISO 11612:2015 A1, B1, C1, F1.

EN ISO 11611:2015 Class 1 A1.

EN1149-5:2008 EN1149-3:2004.

TOP: Radio loop is positioned above the right breast pocket. LEFT: Icon guide. A clear view of EN certification for which the garment complies.

Weight:

290gsm

Fabric:

75% FR Cotton, 24% Polyester, 1% Anti-static, with FC finish to EN 13034

Sizes:

S - 4XL. Reg 29”, Tall 31”

Care:

Industrial Wash

Range:

Colours shown are available from stock

18

www.johnsonsworkwear.com

0800 592 254

FLAMEPRO COVERALL

Two-way concealed front zip with storm flap. Two chest pockets with zip closure and storm flaps. One sleeve pocket. Action back pleats. Two radio loops. Elasticised waistband. Two back pockets. Two side pockets with hidden exterior-to-interior access. Internal knee pad pockets. Tool pocket on right leg. Concealed press stud on cuffs. 2 50mm wide reflective FR striping around arms, legs and over the shoulders.

Standards: EN ISO 11612 A1 + A2, B1, C1, F1:

IEC 61482-1-2, HRC2 11cal:

EN ISO 1149-5:

EN ISO 11611 A1

Weight:

350gsm

Fabric:

Daletec 98% Pyrovatex treated Cotton 2% Carbon Fibre

Sizes:

36 - 60 Regular 32.5 Inside Leg

Care:

Industrial Wash

Range:

Colours shown are available from stock

19

01 PROTECTIVE

WORKWEAR FR ANTI-STATIC

CLASSIC NORDIC COVERALL

Coverall has two zipped chest pockets and centre front fastening. Left sleeve has radio pockets, and legs have knee pad pockets.

Standards: EN ISO 11611:2015 A1, A2, B1, C2, F1.

EN 1149-5:2018

IEC 61482 1-2-:2018 Arc Thermal Protection Value (ATPV) 10.2 Cal/cm2 = PPE 2 CAT 2 ELIM 9.7 Cal/cm2 Arc Protection Class (ACP) 1 (former Class 1) = 4KA

TOP: Nordic style retro reflective tape is positioned across the shoulder to increase visibility from above. BOTTOM: Back hip patch pocket on right side. Tow side swing pockets for comfort, and stud fastening cuffs.

Weight:

320gsm

Fabric:

80% cotton, 19% polyester, 1% anti-static

Sizes:

UK34 - UK60 I/L 31 Longer Leg. Lengths are available on request

Care:

Industrial Wash

Range:

Colours shown are available from stock

20

www.johnsonsworkwear.com

0800 592 254

21

01 PROTECTIVE WORKWEAR

ANTI- STATIC

FR ANTI-STATIC JACKET

TOP: Icon guide. A clear view of EN

certification for which the garment complies

Concealed stud front fastening. 2 breast pockets with concealed stud fastening flaps. Set in sleeves. Action back.

LEFT: Two breast pockets with Flap.

RIGHT: Breast pocket has stud fastening for additional security.

Standards: EN ISO 11612:2015 A1, B1, C1, F1.

EN ISO 11611:2015 Class 1 A1.

EN1149-5:2008

EN1149-3:2004.

Weight:

290gsm

Fabric:

75% FR Cotton, 24% Polyester, 1% Anti-static, with FC finish to EN 13034

Sizes:

S - 4XL Regular

Care:

Industrial Wash

Range:

Colour shown available from stock

22

www.johnsonsworkwear.com

0800 592 254

FR ANTI-STATIC TROUSER

Hook and bar fastening waistband with 7 belt loops. Metal zip fly. 2 side swing pockets.

Standards: EN ISO 11612:2015 A1, B1, C1, F1.

EN ISO 11611:2015 Class 1 A1.

EN1149-5:2008

EN1149-3:2004.

Weight:

290gsm

Fabric:

75% FR Cotton, 24% Polyester, 1% Anti-static, with FC finish to EN 13034 EN13034:2005+A1:2009.

Sizes:

30 - 46. Reg 31”, Tall 33”

Care:

Industrial Wash

Range:

Colours shown are available from stock

TOP: Side swing pocket. Icon guide. A clear view of EN certification for which the garment complies.

23

01 PROTECTIVE

WORKWEAR FR ANTI-STATIC

Concealed one-way, black high density polyester coil zip with brass snap closure. Two chest pockets with flaps, one with a separate mobile phone pocket. Gas detector and pen pocket on left sleeve. Action back pleats for freedom of movement and comfort. Two large side pockets. Adjustable waistband. Concealed press button on cuffs. 2 50mm wide reflective FR striping around arms and over the shoulders. ANTI-STATIC FR JACKET

Standards: EN ISO 11612 A1 + A2, B1, C1, F1:

IEC 61482-1-2, HRC2 11cal:

EN ISO 1149-5:

Weight:

350gsm

Fabric:

Daletec 98% Pyrovatex treated Cotton 2% Carbon Fibre

Sizes:

S - XXXL

Care:

Industrial Launder

Range:

Colours shown are available from stock

24

www.johnsonsworkwear.com

0800 592 254

FR ANTI-STATIC TROUSER

Two deep side pockets. Two back pockets, one with flap. Large cargo pocket with separate mobile phone pocket on left leg, Double tool pocket on right leg, 2 50mm wide reflective FR striping around legs.

Standards: EN ISO 11612 A1 + A2, B1, C1, F1:

IEC 61482-1-2, HRC2 11cal:

EN ISO 1149-5:

Weight:

350gsm

Fabric:

Daletec 98% Pyrovatex treated Cotton 2% Carbon Fibre

Sizes:

30-50 Regular or Tall

Care:

Industrial Launder

Range:

Colours shown are available from stock

25

01 PROTECTIVE

WORKWEAR FR ANTI-STATIC

UNDERWEAR FR ANTI-STATIC T-SHIRT

Inherent Flame Retardant t-shirt underwear with long sleeves in a soft tricot. Round neck and long sleeves.

Standards: EN ISO 11612 A1 B1 C1 F1,

IEC 61482-2 CL.1 ARC RATING: 7.0cal/cm2, EN 1149-5

Weight:

235g/m 2

Fabric:

Cantex JX, 235g/m 2 , LOI: 30.1%

Sizes:

XXS - 3XL, 5XL,7XL

Care:

Industrial Wash

Range:

Colour shown available from stock

26

www.johnsonsworkwear.com

0800 592 254

UNDERWEAR FR ANTI-STATIC LONG JOHNS

Inherent Flame Retardant long johns in a soft tricot. Elasticated waist.

Standards: EN ISO 11612 A1 B1 C1 F1,

IEC 61482-2 CL.1 ARC RATING: 7.0 cal/cm2, EN 1149-5

Weight:

235g/m 2

Fabric:

Cantex JX, 235g/m 2 , LOI: 30.1%

Sizes:

XXS - 3XL, 5XL, 7XL

Care:

Industrial Wash

Range:

Colour shown available from stock

27

01 PROTECTIVE WORKWEAR

CHEMICAL SPLASH

Chemical splash

28

www.johnsonsworkwear.com

0800 592 254

CARE OF LIMITED CHEMICAL SPLASH PROTECTION Limited chemical splash garments are treated with a fluorocarbon (FC) finish which prevents penetration by water, oil and certain mild chemicals. But it is not permanent. In order to maintain the protection levels, the following guidelines should be observed during laundering: • Wash separately to garments with a standard type of finish. • To reactivate the finish dry in a tunnel dryer, ensuring the temperature does not exceed 160 o C (recommended temperature is 130 o C to 160 o C) • If the garments are dried in a tumble dryer, the inlet air temperature of the tumbler should attain at least 120 o C. This ensures the ‘reactivation’ of the finish and increases the repellent performance.

LIQUID CHEMICAL SPLASH PROTECTION Certain common forms of chemicals, such as reduced concentrations of acids and alkalis, are encountered by operators working in a wide range of industry sectors. The risks can be diverse, depending on the substances being handled, so it is essential that a risk assessment is carried out to determine the most appropriate type of protection required. This risk assessment will give important indications about the most suitable type of material, clothing design and composition of the most effective solution, e.g. combination with other types of PPE or other items of chemical protective clothing.

• Tumble drying at low temperatures and line drying should be avoided.

• The lifetime of the finish can be increased further by rinsing the garments with a fluorocarbon- based rinsing agent in the final rinse of the wash cycle. • The re-treatment of limited chemical splash garments can be carried out after every wash cycle for maximum performance. However, a treatment every 5 wash cycles should suffice, if accompanied by adequate drying conditions to reactivate the FC finish properly.

29

01 PROTECTIVE WORKWEAR

CHEMICAL SPLASH

CHEM SPLASH COVERALL

Concealed stud front fastening. 2 breast pockets with concealed stud fastening flaps. Set in sleeves. Action back. 2 side swing pockets in self fabric with trouser access. Rule pocket.

Standards: Fabric used is certified to EN13034 Weight: 270gsm Fabric: 100% Polyester Sizes: 92cm-140cm, 8cm increments- Reg 29inch, Tall 31inch. Care: Industrial Wash

Range:

Colour shown available from stock

30

www.johnsonsworkwear.com

0800 592 254

TOP: Pocket flaps are 2cm larger than pockets to stop any unwanted ingression and have a secure stud closure. RIGHT: Elasticated side waist gives comfort and flexibility.

31

01 PROTECTIVE WORKWEAR

CHEMICAL SPLASH

Concealed stud front fastening with exposed stud to shoulder and collar. Stand collar. Single internal lower patch pocket. Long sleeves with knitted cuffs. Finished length: 110cm. CHEM SPLASH HOWIE LAB COAT

Standards: Fabric used is certified to EN 13034 Weight: 245gsm Fabric: Polyester / Cotton with DFC Finish Sizes: 92 - 140cm 8cm increments Care: Industrial Wash

Range:

Colour shown available from stock

TOP: Asymmetrical front neck studded closure. BOTTOM: Flexible comfort knit cuff.

32

www.johnsonsworkwear.com

0800 592 254

TOP: Coat has a breast pocket with pen divider section. BOTTOM: Centre back vent.

CHEM SPLASH COAT

Concealed stud front fastening. Single breast patch pocket with pen pocket. 2 lower patch pockets. Side access slits. Plain hemmed sleeves. Back Vent. Finished length: 112cm.

Standards: Fabric to EN13034 or equivalent, garment is not certified to EN13034 Weight: 245gsm Fabric: 65% Polyester/ 35% Cotton with DFC Sizes: S - XXL, Regular Care: Industrial Wash

Range:

Colour shown available from stock

33

01 PROTECTIVE WORKWEAR

CLEAN ROOM

Clean

room

The basic requirements for cleanroom fabric is that it should be non-linting and have good filtration efficiency to prevent particles from being released within the controlled environment. All garments in our Cleanroom range are manufactured using densely woven barrier fabrics to ensure the highest standard of particle control. For use in ISO Class 3 Cleanrooms. A superior anti-static performance is achieved by a conductive carbon yarn which controls the risk of static build up. The carbon yarn is woven into the fabric therefore makes the anti- static properties permanent and can withstand the demands of the specialist cleaning processes in an Industrial laundry.

34

www.johnsonsworkwear.com

0800 592 254

CLEANROOM COAT

Concealed zip front fastening. Stand collar. Raglan sleeves with knitted cuffs. All edges are heat sealed before sewing. Seams are twin needle stitched.

Standards: Fabric Conforms to EN 1149-1:2006 EN 1149-3 (NFPA 99) Weight: 105gsm Fabric: 98% polyester filament yarn, 2% anti-Static grid Sizes: Small to 3XL- Regular Fit Care: Industrial Wash

Range:

Colour shown available from stock

35

01 PROTECTIVE WORKWEAR

CLEAN ROOM

CLEANROOM COVERALL

Concealed plastic zip front fastening. Stand collar. Raglan sleeves. Adjustable stud fastening cuffs and ankles. All edges are heat sealed before sewing. Seams are twin needle stitched.

LEFT: Centre front zip with guard and stud closure ensuring complete coverage. RIGHT: Adjustable stud, cuff fastening.

Standards: Fabric tested to EN1149:1 and EN1149-3: NFPA 99 Weight: 105gsm Fabric:

98% polyester filament yarn, 2% anti-static grid

Sizes:

Small to 3XL Regular Fit

Care:

Industrial Wash

Range:

Colour shown available from stock

36

www.johnsonsworkwear.com

0800 592 254

37

01 PROTECTIVE WORKWEAR

CLEAN ROOM

CLEANROOM BOOT

Calf length boot with elasticated top hem. Two stud adjustment at the front and two ties attached to the heel to ensure a comfortable fit. Dissipative flat sole. All edges are heat sealed before sewing. Seams are twin needle stitched.

Standards: Fabric tested to EN 1149:1 and EN 1149-3: NFPA 99 Weight: 105gsm Fabric: 98% polyester filament yarn, 2% anti-static Sizes: Small to 3XL Regular fit Care: Industrial Wash

Range:

Colour shown available from stock

38

www.johnsonsworkwear.com

0800 592 254

CLEANROOM HOOD

Adjustable stud front fastening. Stud adjustment at the back for improved fit. All edges are heat sealed before sewing. Seams are twin needle stitched.

Standards: Fabric tested to EN1149:1 and EN 1149-3: NFPA 99 Weight: 105gsm Fabric:

98% polyester filament yarn, 2%

Sizes:

S - 3XL Regular

Care:

Industrial Wash

Range:

Colour shown available from stock

39

01 PROTECTIVE WORKWEAR

ELECTRIC ARC

Electric arc

CURRENT EUROPEAN NORMS

Electric Arc is essentially an electric discharge that produces plasma discharge between two conductors. The arc is the spark that jumps between any gap created in an electrical system. This can be a bolt of lightning jumping between a cloud and a point on earth, or more commonly the tiny spark that can occur when a light switch is flicked on or off. Our Electric Arc garments cover a wide range of sectors industrial

EN 61482 – 1-1:2009: Test Method – Determination of the arc rating (ATPV or EBT). EN 61482 – 1-2:2007: Test Method – Determination of arc protection class (box test) Class 1 – 4kA Class 2 – 7kA.

EN ISO 11612-2008: Protective Clothing - Protection against heat and flame. EN ISO 11611-2007: Protective Clothing – For use in welding and allied processes. IEC 61482 – 2:2009: Protective Clothing – Against the thermal hazards of an electric arc – requirements.

electrical, power generation, Rail, Windpower, Utilities and petrochemical.

40

www.johnsonsworkwear.com

0800 592 254

CLASSIC NORDIC COVERALL

Coverall has two zipped chest pockets and centre front fastening. Left sleeve has radio pockets, and legs have knee pad pockets.

Standards: EN ISO11611

EN ISO11612

EN1149-5

IEC 61482-2:2009

Weight:

320gsm

Fabric:

80% cotton, 19% polyester, 1% anti-static

Sizes:

UK34 - UK60 I/L 31 Longer Leg. Lengths are available on request

Care:

Industrial Wash

Range:

Colours shown are available from stock

41

01 PROTECTIVE WORKWEAR

ELECTRIC ARC

FR ANTI-STATIC COVERALL

Concealed stud front fastening. 2 breast pockets with concealed stud fastening flaps. Set in sleeves. Action back and side waist elastication. 2 side swing pockets in self fabric with trouser access. Rule pocket to right leg FR reflective tape over shoulders around sleeves and legs.

Standards: EN ISO 11612:2015 A1, B1, C1, F1.

EN ISO 11611:2015 Class 1 A1.

EN1149-5:2008 EN1149-3:2004.

IEC 61482-2 Class 1 4kA / ATPV = 8.9cal/cm.

Weight:

290gsm

Fabric:

75% FR Cotton, 24% Polyester, 1% Anti-static, with FC finish to EN 13034

Sizes:

S - 4XL. Reg 29”, Tall 31”

Care:

Industrial wash. Special laundering conditions apply for garments with reflective tape Colours shown are available from stock

Range:

42

www.johnsonsworkwear.com

0800 592 254

FLAMEPRO COVERALL

Two-way concealed front zip with storm flap. Two chest pockets with zip closure and storm flaps. One sleeve pocket. Action back pleats. Two radio loops. Elasticised waistband. Two back pockets. Two side pockets with hidden exterior-to-interior access. Internal knee pad pockets. Tool pocket on right leg. Concealed press stud on cuffs. 2 50mm wide reflective FR striping around arms, legs and over the shoulders.

Standards: EN ISO 11612 A1 + A2, B1, C1, F1:

IEC 61482-1-2, HRC2 11cal:

EN ISO 1149-5:

EN ISO 11611 A1

Weight:

350gsm

Fabric:

Daletec 98% Pyrovatex treated Cotton 2% Carbon Fibre

Sizes:

36 - 60 Regular 32.5 Inside Leg

Care:

Industrial Wash

Range:

Colours shown are available from stock

43

01 PROTECTIVE WORKWEAR

ELECTRIC ARC

Concealed two way polyester zip. Two chest pockets with concealed zip closure. Mobile phone and pen pocket is positioned on the sleeve, two radio loops and internal chest pocket. Action back for ease of flexibility. Two swing pockets for exterior-to-interior access through pocket lining. Rule and tool pocket on right leg, internal knee pads pockets. Cuffs are concealed snap fastenings. SHIPPING COVERALL

Standards: EN ISO 11612 A1 + A2, B1, C1;

IEC 61482-1-2Electric Arc Flash

Weight:

290gsm

Fabric:

Daletec 75/25% Pyrovatex Treated Cotton/Polyester

Sizes:

36 - 60 Regular

Care:

Suitable for industrial laundering, special laundering conductions apply for garments with reflective tape Colours shown are available from stock

Range:

44

www.johnsonsworkwear.com

0800 592 254

WELDPRO COVERALL Front button closure. Two chest pockets. Elasticised waistband. Two side pockets, Ruler and tool pocket on right leg. Internal knee pad pockets knee pads sold separately.

Standards: EN ISO 11612 A1 + A2, B1, C1, F1;

IEC 61482-1-2;

EN ISO 11611, Class 2 Class 1

Weight:

450gsm

Fabric:

Daletec 100% Pyrovatex Treated Cotton

Sizes:

36 - 60 Regular 32.5 inside leg

Care:

S uitable for industrial laundering, special laundering conductions apply for garments with reflective tape Colours shown are available from stock

Range:

45

01 PROTECTIVE WORKWEAR

ELECTRIC ARC

ANTI-STATIC FR JACKET

Concealed one-way, black high density polyester coil zip with brass snap closure. Two chest pockets with flaps, one with a separate mobile phone pocket. Gas detector and pen pocket on left sleeve. Action back pleats for freedom of movement and comfort. Two large side pockets. Adjustable waistband. Concealed press button on cuffs. 2 50mm wide reflective FR striping around arms and over the shoulders.

Standards: EN ISO 11612 A1 + A2, B1, C1, F1:

IEC 61482-1-2, HRC2 11cal:

EN ISO 1149-5:

Weight:

350gsm

Fabric:

Daletec 98% Pyrovatex treated Cotton 2% Carbon Fibre

Sizes:

S - XXXL

Care:

Industrial Launder

Range:

Colours shown are available from stock

46

www.johnsonsworkwear.com

0800 592 254

FR ANTI-STATIC TROUSER

Two deep side pockets. Two back pockets, one with flap. Large cargo pocket with separate mobile phone pocket on left leg, Double tool pocket on right leg, 2 50mm wide reflective FR striping around legs.

Standards: EN ISO 11612 A1 + A2, B1, C1, F1:

IEC 61482-1-2, HRC2 11cal:

EN ISO 1149-5:

Weight:

350gsm

Fabric:

Daletec 98% Pyrovatex treated Cotton 2% Carbon Fibre

Sizes:

30-50 Regular or Tall

Care:

Industrial Launder

Range:

Colours shown are available from stock

47

01 PROTECTIVE WORKWEAR

ELECTRIC ARC

MAGMA FR JACKET

Flame Retardant jacket in a comfortable fabric with the highest protection against molten aluminium. The fabric also has good properties against other molten metals. Concealed front zip and button closing. High collar and extended back for extra protection. Chest pockets with flaps, concealed keyring holder under right flap. Strap for pen/tools. Roomy side pockets with flaps. Adjustable cuffs with press studs. Reflective stripes on sleeves and over shoulders.

Standards: EN ISO 11612 A1+A2 B1 C1 D3 E3 F1, IEC 61482-2 CL.1 ARC RATING: 9.5 cal/cm 2 EN ISO 11611 Cl.2, ISO 9185

Weight:

370g/m 2

Fabric:

Magma C, 370 g/m 2 , Cl.2, ISO 9185 Cryloite, LOI: 25.9%, Fluorescent, Magma HV, 375 g/m 2 XS - 4XL Male and Female fit available on request

Sizes:

Care:

Industrial Wash

Range:

Colour shown available from stock

48

www.johnsonsworkwear.com

0800 592 254

MAGMA FR TROUSERS Flame Retardant trousers with shoe protection in a comfortable fabric with the highest protection against molten aluminium. The fabric also has good properties against other molten metals. Front pockets. Hip pocket with flap. Strengthened ruler pocket with flap. Shoe protection and heavy protection on the lower front of the legs. Thin reflective stripes on the back of the legs.

Standards: EN ISO 11612 A1+A2 B1 C1 D3 E3 F1,

IEC 61482-2 CL.1 ARC RATING: 9.5 cal/cm 2 EN 11611 Class 2 A1 A2

Weight:

370g/m 2

Fabric:

M agma C, 370 g/m 2 , Fluorescent, Magma HV, 375 g/m 2

Sizes:

30-50R, 32-40T, 30-48S

Care:

Industrial Wash

Range:

Colour shown available from stock

49

01 PROTECTIVE WORKWEAR

ELECTRIC ARC

TOP: Inherent flame retardant fabric, contrast back yoke and top sleeve to increase visability.

MAGMA FR SHIRT

Non-metal and Inherent Flame Retardant shirt made from a comfortable fabric with the highest protection against molten aluminium. The fabric also has good properties against other molten metals. Double button placket and concealed press studs. Chest pockets with flaps. Ventilations on the back. Adjustable cuffs with press studs.

Standards: EN ISO 11612 A1+A2 B1 C1 D3 E3 F1, IEC 61482-2 ARC RATING 8.3 cal/cm 2 Weight: 310g/m 2 Fabric:

M agma S, 310 g/m 2 , Fluorescent, LOI: 27.8%

Sizes:

XS - 4XL

Care:

Industrial Wash

Range:

Colour shown available from stock

50

www.johnsonsworkwear.com

0800 592 254

Long sleeve polo shirt with button fastening neck. Double layer reinforcement at shoulders. LONG SLEEVE POLO SHIRT

Standards: EN ISO 11612:2015 A1, B1, C1, F1.

EN 1149-5: 2008. EN 1149-3: 2004. EN 61482-2: 2009.

EN 61482-1-2: 2007 Class 1 4kA ATPV = 11.6cal/cm 2 , not suitable for welding

Weight:

220gsm

Fabric:

86% Cotton Proban 12% Nylon / 2% Anti-

Sizes:

S - 2XL Regular

Care:

Industrial wash.

Range:

Colour shown available from stock

51

01 PROTECTIVE WORKWEAR

ELECTRIC ARC

Non- metal, inherent flame retardant shirt with hi visibility fabric positioned across back shoulders and sleeve head. A small strip of retro reflective tape is positioned on the upper sleeve to increase visibility. Shirt collar and concealed front closing with stud fastening. Two chest pockets with stud flap closure and adjustable stud fastening cuffs. FR PRO SHIRT 5770 91

TOP: Inherent flame retardant fabric, contrast back yoke and top sleeve to increase visability.

Standards: EN ISO 11612 A1 B1 C1 F1

IEC 61482-2 Class 1 Arc rating 5.2 cal/cm2 EN 1149 – 5

Weight:

160g/m 2

Fabric:

C antex Pro and Florescent

Sizes:

XS - 4XL

Care:

Industrial Wash

Range:

Colour shown available from stock

52

www.johnsonsworkwear.com

0800 592 254

53

01 PROTECTIVE WORKWEAR

ELECTRIC ARC

UNDERWEAR FR ANTI-STATIC T-SHIRT

Inherent Flame Retardant t-shirt underwear with long sleeves in a soft tricot. Round neck and long sleeves.

Standards: EN ISO 11612 A1 B1 C1 F1,

IEC 61482-2 CL.1 ARC RATING: 7.0cal/cm2, EN 1149-5

Weight:

235g/m 2

Fabric:

Cantex JX, 235g/m 2 , LOI: 30.1%

Sizes:

XXS - 3XL, 5XL,7XL

Care:

Industrial Wash

Range:

Colour shown available from stock

54

www.johnsonsworkwear.com

0800 592 254

UNDERWEAR FR ANTI-STATIC LONG JOHNS

Inherent Flame Retardant long johns in a soft tricot. Elasticated waist.

Standards: EN ISO 11612 A1 B1 C1 F1,

IEC 61482-2 CL.1 ARC RATING: 7.0 cal/cm2, EN 1149-5

Weight:

235g/m 2

Fabric:

Cantex JX, 235g/m 2 , LOI: 30.1%

Sizes:

XXS - 3XL, 5XL, 7XL

Care:

Industrial Wash

Range:

Colour shown available from stock

55

01 PROTECTIVE WORKWEAR

HIGH VISIBILITY

High

visibilit

CURRENT EUROPEAN NORMS

EN 20471: 2003: Hi Visibility Test Methods and Requirements. RIS -3279-TOM:

EN 11611: 2015: Protective Clothing for use in Welding & Allied Processes EN 11612: 2015 Protective Clothing to protect against Heat & Flame. EN 343: 2003+A1:2007/AC:2009: Protective Clothing to protect against Rain.

(formerly GO/RT 3279) Rail Industry standard for High Visibility Clothing.

56

www.johnsonsworkwear.com

0800 592 254

HIGH VISIBILITY PROTECTION

Johnsons Workwear offers a range of High Visibility garments which meet various standard requirements. Hi Visibility garments shall consist of a fluorescent background material to provide conspicuity during daylight conditions, and retro-reflective tape which ensures visibility under illumination of headlights in the dark. A garment shall have 360° visibility. This is achieved by encircling the body, arms and legs with horizontal fluorescent material and retro-reflective tape. There are three classes of high visibility garment based on the total area of fluorescent material and retro-reflective tape. Class 3 provides the highest level of conspicuity against most backgrounds, and Class 1 provides the lowest level. Selection should be based on a risk assessment in the required location or situation. All protective clothing must be kept in a clean condition in order to function correctly. This is particularly relevant with high visibility clothing. The visual performance of the garment will be affected by any soiling on the surface, and the wearer may be at risk. The importance of regular cleaning cannot be overstated. But the wearer must carefully select the washing and drying processes used for high visibility garments. Incorrect processing may permanently damage the fluorescent material and the retro-reflective tape. CARE OF A HIGH VISIBILITY GARMENT

ty

57

01 PROTECTIVE WORKWEAR

HIGH VISIBILITY

GRYZKO ® HI-VIS CONTRAST COVERALL

2 bands of reflective tape around chest, sleeves and legs. Nordic tape positioning over shoulders. 2 breast pockets with concealed stud fastening flaps. One internal smart phone pocket. 1 back hip pocket. Brass zip front fastening with concealed stud fastening storm flap. 2 external full width adjustable knee pad pockets with Velcro fastening. 2 side swing pockets. 2 cargo pockets. Action back. Side waist elastication. Twin stitching throughout. Contrast front and back yokes, pocket flaps, lower sleeves and lower legs. knee pads sold separately GZKP100.

Standards: EN ISO 20471:2013 Class 3

Weight:

270gsm / 300gsm

Fabric:

HV - 85% polyester / 15% cotton, Contrast - 65% polyester / 35% cotton

Sizes:

S - 4XL. Reg 29 inch, Tall 31inch

Care:

Industrial wash. Special laundering conditions apply for garments with reflective tape Colours shown are available from stock

Range:

58

www.johnsonsworkwear.com

0800 592 254

TOP: Concealed brass zip fastening with stud closure, contrast guard. LEFT: Breast pocket with contrast pocket flap secured with stud closure. RIGHT: Retro reflective tape gives 360 0 visibility around chest, arms and legs.

59

01 PROTECTIVE WORKWEAR

HIGH VISIBILITY

GRYZKO ® HI-VIS CONTRAST JACKET

TOP: Breast pockets have secure stud flap fastening. Each pocket flap is wider than the pocket to prevent it being tucked in. LEFT: Contrast fabric across the shoulders with Nordic style retro reflective tape to increase visibility from above.

2 bands of reflective tape around chest and arms with Nordic tape positioning over shoulder. 2 mitred breast pockets with concealed stud fastening. One internal smart phone pocket to left as worn. Chunky zip front fastening with concealed stud fastening stormflap. Sidewaist elastication and action back. Twin stitching. Contrast front and back yoke and pocket flaps.

Standards: EN ISO 20471:2013 Class 2

Weight:

270gsm

Fabric:

HV - 85% polyester / 15% cotton, Contrast - 65% polyester / 35% cotton

Sizes:

S - 4XL Regular

Care:

Industrial wash. Special laundering conditions apply for garments with reflective tape

Range:

Colour shown available from stock

60

www.johnsonsworkwear.com

0800 592 254

GRYZKO ® HI-VIS CONTRAST TROUSER

2 external full width adjustable knee pad pockets with concealed Velcro fastening to top. 2 front swing pockets, 1 back hip pocket. 2 cargo pockets with flaps,2 bands of reflective tape around legs. Twin stitching. Contrast front and lower back of legs. Knee pads sold separately GZKP100.

Standards: EN ISO 20471:2013 Class 1

Weight:

270gsm

Fabric:

HV - 85% polyester / 15% cotton, Contrast - 65% polyester / 35%

Sizes:

30 - 46 Regular 31inch & Tall 33inch

Care:

Industrial wash. Special laundering conditions apply for garments with reflective tape Colours shown are available from stock

Range:

61

01 PROTECTIVE WORKWEAR

HIGH VISIBILITY

HI-VIS EXECUTIVE WAISTCOAT Hi Vis executive waistcoat. Front zip fastening. Reflective bands & braces. 2 large front pockets with flaps. Mobile phone pocket with Velcro fastening flap. Pen & pencil pockets. Transparent ID pouch pocket.

TOP: Mobile phone pocket with flap for security.

LEFT: Large front pocket with top entrance and flap for security, side entrance comfort pocket.

Standards: EN ISO 20471:2013 Class 2

Fabric:

100% Polyester

Sizes:

M – 4XL Regular

Care:

Domestic Wash

Range:

Colour shown available from stock

62

www.johnsonsworkwear.com

0800 592 254

TOP: Retro reflective tape is positioned around the body to give 360 0 reflection. BOTTOM: Navy trim and contrast colour, comfort collar and sleeve cuffs.

TWO TONE POLO

Short sleeve. 3 Button placket. Navy trim on collar and sleeve cuffs. Reflective tape.

Standards: EN ISO 20471:2013 Class 2

Fabric:

100% Polyester

Sizes:

M – 4XL Regular

Care:

Domestic Wash

Range:

Colours shown are available from stock

63

01 PROTECTIVE WORKWEAR

HIGH VISIBILITY

HI-VIS POLO

Short sleeve. 3 Button placket. Navy trim on collar and sleeve cuffs.

Standards: EN ISO 20471:2013 Class 2

Fabric:

100% Polyester

Sizes:

M – 4XL Regular

Care:

Domestic Wash

Range:

Colours shown are available from stock

64

www.johnsonsworkwear.com

0800 592 254

GRYZKO ® HI-VIS POLO

3 stud neck fastening. Complete with two band and brace reflective tape.

Standards: EN ISO 20471:2013 Class 2

Weight:

185gsm

Fabric:

55% Cotton / 45% Natura

Sizes:

S - 2XL Regular

Care:

Industrial wash. Special laundering conditions apply for garments with reflective tape

Range:

Colour shown available from stock

65

01 PROTECTIVE WORKWEAR

HIGH VISIBILITY

HI-VIS COVERALL Concealed stud front fastening. Set in sleeves. 2 breast pockets with stud fastening flaps. 2 side swing pockets with access to trousers. Hip and rule pockets. 2 bands of reflective tape around chest, sleeves, legs, and over shoulders. Action back. Self-fabric pocket bags.

Standards: EN ISO 20471:2013 Class 3

TOP: Retro reflective tape is positioned across the chest and over the shoulder to increase reflective vis-ability. LEFT: Breast pocket with stud fastening for security.

GO/RT 3279 Orange Only

Weight:

270gsm

Fabric:

85% Polyester / 15% Cotton

Sizes:

92cm - 140cm Regular & Tall, 8cm increments Industrial wash or dry clean. Special laundering conditions apply for garments with reflective tape. Colours shown are available from stock

RIGHT: Icon guide. A clear view of EN

Care:

certification for which the garment complies.

Range:

66

www.johnsonsworkwear.com

0800 592 254

HI-VIS SWEATSHIRT

Anti-pill fleece fabric. 2 bands of Reflective tape across chest, sleeves and over shoulder.

Standards: EN ISO 20471:2013 Class 3.

RIS-3279-TOM GO/RT 3279 - only Hi Vis Orange

Weight:

280gsm

Fabric:

Anti Pill Fleece Fabric

Sizes:

S - 6XL Regular

Care:

Domestic Wash

Range:

Colours shown are available from stock

67

01 PROTECTIVE WORKWEAR

HIGH VISIBILITY FLAME RETARDANT

GRYZKO ® HI-VIS FR CONTRAST COVERALL

2 bands of FR reflective tape around chest, sleeves and legs. Nordic tape positioning over shoulders. 2 breast pockets with concealed stud fastening flaps. One internal smart phone pocket. Plastic zip front fastening with concealed stud fastening storm flap. 2 external full width adjustable knee pad pockets with Velcro fastening. 2 side swing pockets. 2 cargo pockets. Action back. Side waist elastication. Twin stitching throughout. Contrast front and back yokes, pocket flaps, lower sleeves, lower legs and pocket facings.

Standards: EN ISO 20471:2013 Class 3.

EN ISO 11612:2015 A1 B1 C1 F1. Not suitable for welding

Weight:

300gsm / 365gsm

Fabric:

HV - 50% FR Cotton / 50% polyester. Contrast - 75% FR Cotton / 25%

Sizes:

S - 4XL. Reg 29 inch, Tall 31 inch

Care:

Industrial wash. Special laundering conditions apply for garments with reflective tape

Range:

Colour shown available from stock

68

www.johnsonsworkwear.com

0800 592 254

HI-VIS FR COVERALL Concealed stud front fastening. Set in sleeves. 2 breast pockets with stud fastening flaps. 2 side swing pockets with access to trousers. Hip and rule pockets. 2 bands of reflective tape around chest, sleeves, legs, and over shoulders. Action back. Self-fabric pocket bags.

Standards: EN ISO 20471:2013 Class 3

RIS-3279-TOM GO/RT 3279

EN ISO 11612 :2005 A1 B1 C1 & F1 (not suitable for welding)

Weight:

300gsm

Fabric:

50% FR Cotton / 50% Polyester

Sizes:

92cm - 140cm Regular & Tall 8cm Increments Industrial wash or dry clean. Special laundering conditions apply for garments with reflective tape.

Care:

Range:

Colour shown available from stock

69

01 PROTECTIVE WORKWEAR

HIGH VISIBILITY MULTI PROTECT

HI-VIS MULTI-PROTECT JACKET

Heavy duty zip fastening. Storm flap fastened with plastic studs. Two lower pockets with plastic stud fastening flaps. Detachable hood with adjustable drawstring. Segmented reflective tape to body, sleeves and over shoulders.

Standards: EN ISO 20471:2013 Class 3.

EN ISO 11612:2015 A1, B2, C2.

EN ISO 11611:2015 Class 1 A1, A2.

EN1149-5:2008 EN1149-3:2004.

IEC 61482-2:2009 Class 1 ATPV - 28.0 cal/cm 2 EN343-2003+A1:2007 Class 3/3

Weight:

410gsm

Fabric:

M odacrylic, Cotton, FR Viscose, Polyester, Aramid, Anti-Static

Sizes:

S – 2XL Regular

Care:

Domestic wash at 40 o C. Do not tumble dry

Range:

Colours shown are available from stock

70

www.johnsonsworkwear.com

0800 592 254

HI-VIS MULTI-PROTECT TROUSER Over trouser with fully elasticated waist. No pockets. Segmented reflective tape around lower trouser legs.

Standards: EN ISO 20471:2013 Class 3.

EN ISO 11612:2015 A1, B2, C2.

EN ISO 11611:2015 Class 1 A1, A2.

EN1149-5:2008 EN1149-3:2004.

IEC 61482-2:2009 Class 1 4kA, ATPV =

Weight:

410gsm

Fabric:

Modacrylic, Cotton, FR Viscose,

Sizes:

S – 2XL Regular

Care:

Domestic wash at 40 o C. Do not tumble dry

Range:

Colour shown available from stock

71

01 PROTECTIVE WORKWEAR

HIGH VISIBILITY MULTI PROTECT

Non-metal Flame Retardant Hi-Vis jacket in double weave fabric with comfort finish on the inside, developed for the railway industry. Extended back. Concealed front zip and press stud. Arm ventilation. Chest pockets with flaps. Loop for radio/gas monitor under right chest MULTI PROTECT EDGE JACKET

Standards: N ISO 11612 A1 B1 C1 F1 ,

IEC 61482-2 CL.1 ARC RATING: 8.7cal/cm 2 EN 1149-5, EN 1149-5 : 2008

pocket flap. Side pockets with flaps. Two inside pockets with flaps. Inside mobile phone pocket. Draw cord at the bottom of the jacket. Adjustable cuffs.

EN ISO 11611 CL.2 A1

EN 13034 type PB 6 Special wash instructions apply EN ISO 20471 CL.3

RIS-3279-TOM

Weight:

355g/m2

Fabric:

Edge HVO, 355g/m 2 , EN ISO 11612 D1 E3, LOI: 27.5%

Sizes:

XS- 4XL

Care:

Industrial Wash

Range:

Colour shown available from stock

72

www.johnsonsworkwear.com

0800 592 254

MULTI PROTECT EDGE TROUSER

Non-metal Flame Retardant Hi-Vis trousers in double weave fabric with comfort finish on the inside, developed for the railway industry. Front pockets. Hip pockets with flap. Cargo pockets with flaps. Shaped knees with adjustable inside kneepad pockets.

Standards: EN ISO 11612 A1 B1 C1 F1 ,

IEC 61482-2 CL.1 ARC RATING: 8.7cal/cm2, EN 1149-5,

EN ISO 11611 CL.2 A1,

RIS-3279-TOM

EN ISO 20471 CL.2

Weight:

355g/m2

Fabric:

Edge HVO, 355g/m2, EN ISO 11612 D1 E3, LOI: 27.5%

Sizes:

30-50R, 32-40T, 34-48S

Care:

Industrial Wash

Range:

Colour shown available from stock

73

01 PROTECTIVE WORKWEAR

HIGH VISIBILITY MULTI PROTECT

EDGE COVERALL

Non-metal Flame Retardant Hi-Vis boilersuit in double weave fabric with comfort finish on the inside, developed for the railway industry. Concealed front zip and press stud closing. Arm ventilation. Left chest vertical pocket with zip. Right chest pocket with flap and loop for radio/ gas monitor. Side pockets with flaps and hidden access. Cargo pockets with flaps to legs. Shaped knees with adjustable inside kneepad pockets. Hip pockets with flaps. Adjustable waistband. Adjustable cuffs. Zip in legs from knee to ankle.

Standards: EN ISO 11612 A1 B1 C1 F1 ,

IEC 61482-2 CL.1 ARC RATING: 8.7cal/cm2, EN 1149-5,

EN ISO 11611 CL.2 A1,

EN 13034 type PB 6, Special wash instructions apply EN ISO 20471 CL.3

RIS-3279-TOM

Weight:

355g/m2

Fabric:

Edge HVO, 355g/m2, EN ISO 11612 D1 E3, LOI: 27.5%

Sizes:

S - 5XL, M - 3XL Tall

Care:

Industrial Wash

Range:

Colour shown available from stock

74

www.johnsonsworkwear.com

0800 592 254

TOP: Right breast pocket with flap and loop for gas/radio monitor. LEFT: Vertical pocket is positioned on the left chest with concealed zip closure. RIGHT: Adjustable touch and close cuff fastening.

75

01 PROTECTIVE WORKWEAR

HIGH VISIBILITY WATERPROOF

TWO TONE TRAFFIC JACKET

Heavyweight PU coated polyester. Quilted lining with polyester filling. Concealed hood. Two-way heavy duty zip front. 2 lower pockets. 1 inside pocket. Knitted storm cuffs. Fully taped seams. Reflective Tape.

Standards: EN ISO 20471:2013 Class 3.

EN 343:2003 + A1:2007 Class 3/1.

Fabric:

Heavyweight PU coated polyester. Quilted lining with polyester filling.

Sizes:

S - 5XL Regular

Care:

Domestic Wash

Range:

Colours shown are available from stock

76

www.johnsonsworkwear.com

0800 592 254