FC1000E/SF1000E/X1020/L1020: EPA 2020 Certification Report

FC1000E/SF1000E/X1020/L1020: EPA 2020 Certification Report

Certificate of Conformity Emissions – Wood Burning Forced Air Furnace EPA 40 CFR Part 60, Subpart QQQQ, ASTM E2515 ‐ 2011, CSA B415.1 ‐ 2010 (R2015), ALT ‐ 134 ‐ 2019 Certificate number: WHI18 – 10583804

Organization: Company Name: HY ‐ C Company, LLC Address: 10950 Linpage Place City, State: St. Louis, MO Zip Code: 63132 Country: USA

This is a certificate of conformity to certify that the bearer has successfully completed the requirements of the above scheme which include the testing of products, the initial assessment, and are subject to continuing annual assessments of their compliance and testing of samples of products taken from production (as applicable to the scheme) and has been registered within the scheme for the products detailed.

Product: Model FC1000E, SF1000E, L1020, X1020 Manufacturer’s Rated Output: 46,435 Btu/hour Weighted Average Emissions: 0.142 lb/million Btu/hour Weighted Average Annual Delivered Efficiency: 40.3% Average Stack Loss Efficiency: 69.57% Test Fuel Type: Cordwood Compliance: Certified to comply with 2020 particulate emissions standard. Report Number: 104415176MID ‐ 002A Revised Report Number: 104415176MID ‐ 002AR2

Certification body: Intertek Testing Services NA, Inc. Initial registration: October 30, 2018 Reissue Date: November 17, 2020 Revised Report Date: November 9, 2021 Date of expiry: December 3, 2026 Issue status: 4

Jean ‐ Philippe Kayl Vice President ‐ Global Certification

12/03/2021

Name

Signature

Date

Registered address: Intertek Testing Services NA, Inc. 545 E. Algonquin Rd. Arlington Heights, IL 60005 USA

www.intertek.com The certificate and schedule are held in force by regular annual surveillance visits by Intertek Testing Services NA, Inc. and the reader or user should contact Intertek to validate its status. This certificate remains the property of Intertek Testing Services NA, Inc. and must be returned to them on demand. This Certificate is for the exclusive use of Intertek's Client and is provided pursuant to the Certification agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this certificate. Only the Client is authorized to permit copying or distribution of this certificate and then only in its entirety. Use of Intertek’s Certification mark is restricted to the conditions laid out in the agreement. Any further use of the Intertek name for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. Initial Factory Assessments and Follow up Services are for the purpose of assuring appropriate usage of the Certification mark in accordance with the agreement, they are not for the purposes of production quality control and do not relieve the Client of their obligations in this respect. Page 1 of 2

HY-C COMPANY, LLC TEST REPORT

SCOPE OF WORK EPA EMISSIONS TESTING FOR MODEL SF1000E REPORT NUMBER 104415176MID-002AR2 TEST DATE(S) 09/15/20 - 09/19/20 ISSUE DATE REVISED DATE 10/06/20 11/09/21 RECORD RETENTION END DATE 11/09/31 PAGES 25

DOCUMENT CONTROL NUMBER RT-L-AMER-TEST-3778 (03/13/18) © 2017 INTERTEK

8431 Murphy Drive Middleton, WI 53562

Telephone: 608-836-4400 Facsimile: 608-831-9279 www.intertek.com/building

TEST REPORT FOR HY-C COMPANY, LLC Report No.: 104415176MID-002AR2 Date: 11/09/21

REPORT ISSUED TO HY-C COMPANY, LLC 10950 Linpage Place St Louis, MO 63132 SECTION 1 SCOPE

Intertek Building & Construction (B&C) was contracted by HY-C Company, LLC to perform testing in accordance with EPA 40 CFR Part 60, “Standards of Performance for New Residential Wood Heaters, New Residential Hydronic Heaters and Forced-Air Furnaces,” ASTM E2515-11, "Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel," CSA B415.1-10, "Performance Testing of Solid-Fuel-Burning Heating Appliances", and ALT-134 EPA Alternate Test Method Letter, issued by the U.S. EPA on August 19, 2019. Results obtained are tested values and were secured by using the designated test method(s). Testing was conducted at Intertek test facility in Middleton, WI. This report does not constitute certification of this product nor an opinion or endorsement by this laboratory. SECTION 2 SUMMARY OF TEST RESULTS The appliance tests resulted in the following performance: Particulate Emissions: 0.14 lb/MMBtu Output Carbon Monoxide Emissions: 1.73 g/min

Heating Efficiency: 40.27% (Higher Heating Value Basis – Direct Output) Heating Efficiency: 69.57% (Higher Heating Value Basis – Stack Loss)

For INTERTEK B&C: COMPLETED BY: Ken Slater

REVIEWED BY: Brian Ziegler

Associate Engineer - Hearth

Technical Team Leader - Hearth

TITLE:

TITLE:

SIGNATURE:

SIGNATURE:

DATE:

DATE:

11/09/21

11/09/21

This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample(s) tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program.

Version: 03/13/18

Page 2 of 25

RT-L-AMER-Test-3778

8431 Murphy Drive Middleton, WI 53562

Telephone: 608-836-4400 Facsimile: 608-831-9279 www.intertek.com/building

TEST REPORT FOR HY-C COMPANY, LLC Report No.: 104415176MID-002AR2 Date: 11/09/21

SECTION 3 TEST METHOD(S) The specimen was evaluated in accordance with the following: EPA 40 CFR Part 60-2015 , Standards of Performance for New Residential Wood Heaters, New Residential Hydronic Heaters and Forced-Air Furnaces ASTM E2515-11 , Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel CSA B415.1-10 (R2015), Performance Testing of Solid-Fuel-Burning Heating Appliances ALT-134 EPA Alternate Test Method Letter , issued by the U.S. EPA on August 19, 2019. See Appendix A for a copy.

SECTION 4 MATERIAL SOURCE

A sample was submitted to Intertek directly from the client. The sample is the test sample used for the original testing performed in October 2018. The test unit was received at Intertek in Middleton, WI on September 9, 2020 and was shipped via the client. The sample was unsealed per the following requirements outlined by the U.S. EPA. In General: 1. Manufacturers are never allowed to unseal a heater. 2. Manufacturers must not involve themselves in the conduct of the test after the pretest burn has begun. 3. All communications must be included in the test documentation required to be submitted pursuant to § 60.533(b)(5) and must be consistent with instructions provided in the owner’s manual required under § 60.536(g), except to the extent that they address details of the certification tests that would not be relevant to owners or regulators. 4. Communications between the manufacturer and laboratory or third-party certifier personnel regarding operation of the wood heater must be limited to written communications transmitted prior to the first pretest burn of the certification test series. Specifics: 5. Take color photographs of the unsealed heater. Photos must include the front, top, and side views and must be date stamped. 6. Describe the tasks, tests, or procedures to be performed on the unsealed. Any modification to the heater will require prior EPA approval. 7. The results of the new certification test will supersede results obtained during the initial certification testing for the above-referenced heater.

Version: 03/13/18

Page 3 of 25

RT-L-AMER-Test-3778

8431 Murphy Drive Middleton, WI 53562

Telephone: 608-836-4400 Facsimile: 608-831-9279 www.intertek.com/building

TEST REPORT FOR HY-C COMPANY, LLC Report No.: 104415176MID-002AR2 Date: 11/09/21

8. Upon completion of the new test series, the heater must be re-sealed with a lab-specific seal in accordance with the 2015 Standards. (60.535(a)(2)(vii)). 9. Provide color photographs of the front, top, and side views of the resealed heater. Photos must be date stamped. 10. Submit the above documentation along with your new performance >Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22 Page 23 Page 24 Page 25 Page 26 Page 27 Page 28 Page 29 Page 30-31 Page 32-33 Page 34-35 Page 36 Page 37 Page 38 Page 39 Page 40 Page 41 Page 42 Page 43 Page 44 Page 45 Page 46 Page 47 Page 48 Page 49 Page 50 Page 51 Page 52 Page 53 Page 54 Page 55 Page 56 Page 57 Page 58 Page 59 Page 60 Page 61 Page 62-63 Page 64 Page 65 Page 66 Page 67 Page 68 Page 69 Page 70 Page 71 Page 72 Page 73 Page 74 Page 75 Page 76 Page 77 Page 78 Page 79 Page 80 Page 81 Page 82 Page 83 Page 84 Page 85 Page 86 Page 87 Page 88 Page 89 Page 90 Page 91 Page 92-93 Page 94 Page 95 Page 96 Page 97 Page 98 Page 99 Page 100 Page 101 Page 102 Page 103 Page 104 Page 105 Page 106 Page 107 Page 108 Page 109 Page 110 Page 111 Page 112 Page 113 Page 114 Page 115 Page 116 Page 117 Page 118 Page 119 Page 120 Page 121 Page 122-123 Page 124 Page 125 Page 126 Page 127 Page 128 Page 129 Page 130 Page 131 Page 132 Page 133 Page 134 Page 135 Page 136 Page 137 Page 138 Page 139 Page 140 Page 141 Page 142 Page 143 Page 144 Page 145 Page 146 Page 147 Page 148 Page 149 Page 150 Page 151 Page 152-153 Page 154 Page 155 Page 156 Page 157 Page 158 Page 159 Page 160 Page 161 Page 162 Page 163 Page 164 Page 165 Page 166 Page 167 Page 168 Page 169 Page 170 Page 171 Page 172 Page 173 Page 174 Page 175 Page 176 Page 177 Page 178 Page 179 Page 180 Page 181 Page 182 Page 183 Page 184 Page 185 Page 186 Page 187 Page 188 Page 189 Page 190 Page 191 Page 192 Page 193 Page 194 Page 195 Page 196-197 Page 198-199 Page 200-201 Page 202-203 Page 204-205 Page 206-207 Page 208-209 Page 210-211 Page 212-213 Page 214-215 Page 216-217 Page 218-219

www.hy-c.com

Made with FlippingBook - professional solution for displaying marketing and sales documents online