Data Loading...
Mi-T-M Dealer Equipment Guide
76 Downloads
47.52 MB
Twitter Facebook LinkedIn Copy link
RECOMMEND FLIP-BOOKS
Dealer Equipment Auction
85R24 fl oater tires, TeeJet CenterLine 220 display, 1,120 hours, SN AGCS4655HNS8A1092, Stock #A1671
Equipment Guide 2020
Cavity Oven • Double cooking cavity with independent controls allowing for two simultaneous cooking
Equipment Guide 2020 Albrecht
Cavity Oven • Double cooking cavity with independent controls allowing for two simultaneous cooking
2022 Festool Canada Dealer Product Guide - Bilingual
2 4" (100 mm) SQ 3 205093* 2 1 Consumable Consommable * Retail packaging **In a box * Emballage au d
Nelson Equipment
backhoe , diesel, 8sp transmission, 16.9-28 rear tires, 16” front tires, 76” loader bucket, 24” back
2022 Festool USA Dealer Product Guide
4" (160 mm) 205564* 1 $145.00 1 Consumable * Retail packaging **In a box 26
HY-C | Brick + Masonry Dealer Product Guide
a limited lifetime aluminum all 1-year limited REGISTER PRODUCTS ONLINE AT WWW.HY-C.COM | 22 MADE IN
Linderkamp Equipment
wheels • 1,500 gal. flat bottom storage tank, has repair • Briggs & Stratton 3hp engine & 2” poly pu
Hamann Equipment
pump • 2,000 gal. vertical poly tank • 1,600 gal. vertical poly tank • 200 gal. poly tank • Electric
OA-Dealer-Aug2020
OA-Dealer-Aug2020 Page 1 Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page
Dealer Equipment Guide 2022
1971 – 2022 M i -T-M C orporation
When I first started this company in 1971, I knew the people I hired would be my most valuable asset. It was true then and it is still true today. The success and growth of Mi-T-M is only made possible by the dedication of the people who put in the hard work to get us where we are now. When I look back over the last 50 years there is a lot to be proud of, from designing and engineering the very first 1000 PSI pressure washer in my garage, to now manufacturing hundreds of industrial equipment in a one million-square-foot facility. Our customers are some of the most well-known in the industry and they are our number one priority. That is why I decided to transition the Mi-T-M Corporation to my employees through a 100% Employee Stock Ownership Plan (ESOP). Each of our 450 employees will share ownership and continue to work with little change except they'll build on what they own. No one understands our customers better, so placing the future of Mi-T-M in their hands is by far the best succession plan. They made Mi-T-M the company what it is today and they will make the best decisions for you, their customers, in the future.
AJ Spiegel, Founder
Product Index
Pressure Washers Air Compressors
p. 5
p. 44
Air Compressor/Generator Combinations p. 52 Air Compressor/Generator/Welder Combinations p. 55 Portable Generators p. 64 Wet/Dry Vacuums p. 72 Jobsite Boxes p. 73 Portable Heaters p. 74 Water Pumps p. 78 Water Treatment Systems p. 81
Products made in USA with Globally Sourced Components
2
R esidential /C ommerical I ndustrial P roducts
At Mi-T-M our number one goal is to make sure customers are satisfied with their purchase of Mi-T-M equipment. By far, the most important factor for customer satisfaction is making sure the right equipment is purchased for jobs they are planning to use it for. Too often we’ve heard that a residential or commercial piece of equipment was sold to a customer only to find out that it is being used on industrial jobs. Those are jobs that need more power and require equipment with a higher hours rating. As experts in the equipment industry, we know how important customer satisfaction is. Professionals and non-professionals choose Mi-T-M, not only for our high quality equipment, but because we set the standards for customer satisfaction.
RESIDENTIAL Residential equipment is built to help customers tackle jobs around their homes. Typically, this type of equipment is more compact and easier to use. It is considered light duty and is only used 2-5 hours per week. COMMERCIAL Commercial grade equipment is used on medium-sized properties like hobby farms and small commercial businesses. This equipment is generally used 5-10 hours per week on jobs that require more power than residential equipment. INDUSTRIAL Industrial equipment is found on jobsites that require heavy-duty power. This type of equipment is often used up to 30 or 40 hours per week, so it requires a much higher hours rating. Mi-T-M is well-known for building equipment that is reliable in industrial settings.
CV-2600-4MHC
AM1-HE15-03QM
GEN-14000-1MHE
FOR MORE INFORMATION ON ALL Mi-T-M PRODUCTS, CONTACT YOUR LOCAL DEALER.
WARNING: Cancer and Reproductive Harm - www.P65warnings.ca.gov.
3
S electing T he R ight P ressure W asher
WHAT YOU SHOULD KNOW... PSI (POUNDS PER SQUARE INCH)
PSI indicates the amount of pressure the unit will create if concentrated on one square inch of surface area. The greater the PSI, the better the cleaning efficiency. GPM (GALLONS PER MINUTE) GPM tells you how much water (gallons) will flow through your pressure washer (flow rate). A higher flow rate will cut down your cleaning time. PSI VS. GPM PSI and GPM are both equally important when choosing a pressure washer. The PSI indicates the amount of pressure and GPM indicates the flow. You must have the correct combination of PSI and GPM to have the most ideal pressure washing system for your needs. CU (CLEANING UNIT) CU is calculated by multiplying PSI by GPM. The number is useful for comparing models. The higher the number of cleaning units, the more cleaning power your pressure washer has. PUMP Pressure washer pumps are driven by the motor or engine and push the water through your pressure washer. The two types of pumps are direct drive and belt drive. NOZZLE The actual pressure is created by the nozzle. Different nozzle sizes (orifices) are available to create the spray angle or pressure needed to fit your cleaning needs. The wider the spray, the less cleaning power. The narrower the spray, the more cleaning power. UNLOADERS AND RELIEF VALVES Pressure washers are equipped with safety features designed to reduce pressure build-up. Unloaders and thermal relief valves prevent heat and water pressure from reaching dangerous levels. COLD OR HOT WATER? Cold water pressure washers are great for cleaning dirt from most any surface; decks, siding, concrete, etc. However, cold water pressure washers cannot remove grease and oil effectively. To clean a surface that needs to be degreased, you'll want to use a hot water pressure washer. Hot water also cleans faster in most applications.
WHAT IS THE DIFFERENCE BETWEEN BELT DRIVE AND DIRECT DRIVE PUMPS?
BELT DRIVE: Most commonly found on industrial models, a belt driven pump is ideal for cleaning applications requiring 20+ hours of use per week. The belt connecting the engine or motor with the high pressure pump dissipates the heat and vibration, minimizes the wear and thus the repair on key components, and extends the life of the pump by reducing the RPM demand. DIRECT DRIVE: For applications requiring less than 20 hours of use per week, direct driven pumps are more commonly used. The pump is directly coupled to the engine or motor causing the pump to spin twice as fast as the belt drive models. Although these models are not recommended for heavy, consistent usage, they are a lower cost alternative to more expensive, belt driven models. IS TIME A FACTOR? A correctly sized pressure washer can cut cleaning times in half. Shorter cleaning time means less labor, which equals more productivity and profit.
4
P ortable E lectric – D irect /B elt D rive – DHS S eries D ealer H ot W ater
KNOWN FOR ITS EFFICIENCY AND LONGEVITY, THESE HOT WATER ELECTRIC PRESSURE WASHERS ARE BUILT FOR HEAVY-DUTY CLEANING ON INDUSTRIAL AND COMMERCIAL WORKSITES.
DH-1502-SE0E1M
MISCELLANEOUS ● Temperature rise 150°F/66°C above ambient, maximum 225°F UNIT INCLUDES ● Nozzles – 0°, 15°, 25° and 40° ● 50-foot hose ● Adjustable pressure dual lance LIMITED WARRANTY 1 year electric motor CERTIFICATION ● Intertek Certified – US and Canada
PUMP ● Equipped with Mi-T-M Pressure Relief Start (PRS) (Mi-T-M pump models) ● External bypass (DH-3004 model) ● Triplex piston pump ● Factory preset unloader MOTOR ● Enclosed fan-cooled electric motor ● 35-foot power cord FRAME ● Reinforced powder coated steel frame ● 13-inch tires COMPONENTS ● Energy-efficient top-fired heat exchanger ● No. 1 or No. 2 diesel or kerosene fired burner (Not approved for bio-fuel)
DH-1502-SE0E1G DH-1502-SE0E1M
DH-2003-SE0E2G DH-2003-SE0E2M DH-3004-SE0E2G
MODEL NUMBER
1500
2000
3000
PSI
2.0
2.8
3.5
GPM
2.0 HP, 120V, 1Ø, 19.0A 4.0 HP, 230V, 1Ø, 18.0A 8.0 HP, 230V, 1Ø, 36.0A
HORSEPOWER/MOTOR
Direct
Direct
Belt
DRIVE
General / Mi-T-M
General / Mi-T-M
General
PUMP
4.0 gallons
4.0 gallons
10.0 gallons
BURNER FUEL TANK CAP.
1.21 gph 169,000
1.48 gph 207,200
2.10 gph 294,000
BURNER FUEL CONS.
BTU PER HOUR
43x29.5x36.5in. 299 lb. / 291 lb.
43x29.5x36.5in. 316 lb. / 308 lb.
49.5x28x40.5in.
DIM. (LxWxH)
607 lb.
NET WT.
Additional models available.
5
P ortable E lectric – B elt D rive – HHB S eries D ealer H ot W ater
DESIGNED FOR HEAVY-DUTY INDUSTRIAL CLEANING JOBS REQUIRING HOT WATER, THE BELT-DRIVEN HHB SERIES CAN EASILY HANDLE DEMANDING JOBS.
3 D ay S hip
Exclusive Product Dealer
HHB-2503-0E2A
PUMP ● Triplex piston pump ● Factory preset unloader MOTOR ● Open drip-proof electric motor ● 35-foot power cord FRAME ● Powder coated steel frame ● 13-inch tires COMPONENTS ● Stainless-steel coil wrap heat exchanger with horizontal schedule 80 pipe coil ● No. 1 or No. 2 fuel, oil, diesel or kerosene fired burner (Not approved for bio-fuel)
MISCELLANEOUS ● Temperature rise 150°F/66°C above ambient, maximum 200°F UNIT INCLUDES ● Nozzles – 0°, 15°, 25°, 40° and low pressure ● 50-foot hose ● Adjustable pressure dual lance LIMITED WARRANTY 1 year electric motor CERTIFICATION ● CSA Certified – US and Canada
HHB-1002-0E1A
HHB-1502-0E1A
HHB-2503-0E2A
MODEL NUMBER
1000
1500
2500
PSI
2.0
1.8
2.8
GPM
1.5 HP, 115V, 1Ø, 16.2A 2.0 HP, 115V, 1Ø, 19.9A 6.0 HP, 230V, 1Ø, 28.0A
HORSEPOWER/MOTOR
AR
AR
AR
PUMP
10.0 gallons
10.0 gallons
10.0 gallons
BURNER FUEL TANK CAP.
1.23 gph 172,200
1.23 gph 172,200
1.84 gph 257,600
BURNER FUEL CONS.
BTU PER HOUR
57x30x41.5in.
57x30x41.5in.
57x30x41.5in.
DIM. (LxWxH)
486 lb.
490 lb.
540 lb.
NET WT.
Additional models available.
6
P ortable E lectric – B elt D rive – HHS S eries D ealer H ot W ater
COMPLETELY PORTABLE, THE HHS SERIES IS EASY TO USE AND ONE OF THE MOST RELIABLE IN THE INDUSTRY. IT CAN EASILY TACKLE THE TOUGHEST CLEANING JOBS INCLUDING GREASE, GRIME AND STUBBORN STAINS.
3 D ay S hip
Exclusive Product Dealer 3 D ay S hip
Exclusive Product Dealer
HHS-3004-2E2G
PUMP ● Triplex piston pump ● Factory preset unloader MOTOR ● Open drip-proof electric motor ● 35-foot power cord FRAME ● Powder coated steel frame ● 13-inch tires COMPONENTS ● Stainless-steel coil wrap heat exchanger with horizontal schedule 80 pipe coil ● No. 1 or No. 2 fuel oil, diesel or kerosene fired burner (Not approved for bio-fuel) ● Auto start/stop ● Time delay shutdown ● Hour meter
MISCELLANEOUS ● Temperature rise 150°F/66°C above ambient, maximum 200°F UNIT INCLUDES ● Nozzles – 0°, 15°, 25°, 40° and low pressure ● 50-foot hose ● Adjustable pressure dual lance LIMITED WARRANTY 1 year electric motor CERTIFICATION ● CSA Certified – US and Canada
HHS-2004-2E2G
HHS-3004-2E2G
HHS-3005-2E2G
MODEL NUMBER
2000
3000
3000
PSI
4.2
3.9
4.8
GPM
6.0 HP, 230V, 1Ø, 28.0A 8.0 HP, 230V, 1Ø, 39.5A 10.0 HP, 230V, 1Ø, 46.5A
HORSEPOWER/MOTOR
General
General
General
PUMP
10.0 gallons
10.0 gallons
10.0 gallons
BURNER FUEL TANK CAP.
2.76 gph 386,400
2.14 gph 341,800
3.06 gph 428,400
BURNER FUEL CONS.
BTU PER HOUR
57x30x41.5in.
57x30x41.5in.
57x30x41.5in.
DIM. (LxWxH)
550 lb.
580 lb.
584 lb.
NET WT.
Additional models available.
7
P ortable G asoline – D irect D rive – DHS S eries D ealer H ot W ater
ONE OF THE MOST POPULAR HOT WATER PRESSURE WASHERS, THIS UNIT FEATURES A UNIQUE ELECTRO MAGNETIC FIRING (EMF) SYSTEM ELIMINATING THE NEED FOR A 12V BATTERY TO OPERATE THE BURNER.
DH-3504-SP3H6A
PUMP ● Triplex piston pump ● Factory preset unloader FRAME ● Reinforced powder coated steel frame ● 13-inch tires COMPONENTS ● Top-fired powder coated heat exchanger ● No. 1 or No. 2 diesel or kerosene fired burner (Not approved for bio-fuel) MISCELLANEOUS ● Temperature rise 150°F/66°C above ambient, maximum 200°F
UNIT INCLUDES ● Nozzles – 0°, 15°, 25° and 40° ● 50-foot hose ● Adjustable pressure dual lance LIMITED WARRANTY 3 year engine CERTIFICATION ● CSA Certified – US and Canada (Consult factory for models)
DH-2503-SP0H6M DH-2503-SP0M6M DH-3003-SP3H6A
DH-3504-SP3G6A DH-3504-SP3M6A
MODEL NUMBER
2500
3000
3500
PSI
2.6
2.9
3.3
GPM
389cc Honda GX390 OHV + 420cc Mi-T-M OHV
196cc Honda GX200 OHV 212cc Mi-T-M OHV
270cc Honda GX270 OHV +
DISPLACEMENT/ENGINE
Mi-T-M
AR, external bypass AR, external bypass
PUMP
0.83 gallon / 0.95 gallon 1.40 gallons
1.61 gallons / 1.72 gallons
FUEL TANK CAPACITY
4.0 gallons
5.5 gallons
5.5 gallons
BURNER FUEL TANK CAP.
1.53 gph 210,000
1.84 gph 253,000
2.14 gph 294,000
BURNER FUEL CONS.
BTU PER HOUR
43x29.5x36.5in.
43x30x41in.
43x30x41in.
DIM. (LxWxH)
295 lb.
407 lb.
428 lb.
NET WT.
+ 49 state engine. Not for sale in California.
Additional models available.
8
P ortable G asoline – D irect /B elt D rive – DHG S eries D ealer H ot W ater THIS HOT WATER PRESSURE WASHER IS CAPABLE OF CLEANING TOUGH GRIME. COMPLETELY PORTABLE, IT FEATURES A 12V BECKETT BURNER AND 4-PANCAKE BOTTOM-FIRED HEAT EXCHANGER.
3 D ay S hip
Exclusive Product Dealer 3 D ay S hip
Exclusive Product Dealer
DHG-4004-B0V6G
PUMP ● Triplex piston pump ● Factory preset unloader ENGINE ● 12V electric start – battery not included FRAME ● Powder coated steel frame ● 15-inch tires COMPONENTS ● 1 ⁄ 2 -inch schedule 80 pipe coil with 4-pancake bottom-fired heat exchanger ● No. 1 or No. 2 diesel or kerosene fired burner (Not approved for bio-fuel) ● Adjustable temperature ● Hour meter
MISCELLANEOUS ● Temperature rise 130°F/54°C above ambient ● Water output temp. 250°F in "wet" steam UNIT INCLUDES ● Nozzles – 0°, 15°, 25° and 40° plus wet steam nozzle, 25° ● External downstream detergent injector ● 50-foot hose ● Adjustable pressure dual lance LIMITED WARRANTY 3 year engine CERTIFICATION ● CSA Certified – US and Canada
DHG-4004-D0H6G DHG-4004-B0H6G
DHG-4004-D0V6G DHG-4004-B0V6G
MODEL NUMBER
4000
4000
PSI
3.7
3.7
GPM
389cc Honda GX390 OHV +
408cc Vanguard OHV
DISPLACEMENT/ENGINE
Direct / Belt
Direct / Belt
DRIVE
General
General
PUMP
1.61 gallons 10.0 gallons
1.52 gallons 10.0 gallons
FUEL TANK CAPACITY
BURNER FUEL TANK CAP.
2.14 gph 299,600
2.14 gph 299,600
BURNER FUEL CONS.
BTU PER HOUR
57.5x35.5x59.5in. 478 lb. / 520 lb.
57.5x35.5x59.5in. 466 lb. / 511 lb.
DIM. (LxWxH)
NET WT.
+ 49 state engine. Not for sale in California.
9
S kid G asoline /D iesel – B elt D rive – HDB S eries D ealer H ot W ater
PERFECT FOR AGRICULTURE AND CONSTRUCTION APPLICATIONS WHERE MOBILITY IS A MUST, THESE COMPACT SKIDS ARE EXTREMELY PORTABLE AND CAN FIT THROUGH A 30-INCH DOORWAY.
3 D ay S hip
Exclusive Product Dealer
HDB-3004-0H6G shown with wheel kit option, AW-5740-0014
PUMP ● Triplex piston pump ● Factory preset unloader ENGINE ● Electric start – battery not included FRAME ● Powder coated steel skid frame ● Optional wheel kit with locking tire brake and four tires COMPONENTS ● Stainless-steel coil wrap heat exchanger with horizontal schedule 80 pipe coil ● 12V Beckett burner – battery not included ● No. 1 or No. 2 fuel oil, diesel or kerosene fired burner (Not approved for bio-fuel)
MISCELLANEOUS ● Temperature rise 150°F/66°C above ambient, maximum 200°F UNIT INCLUDES ● Nozzles – 0°, 15°, 25° and 40° ● 50-foot hose ● Adjustable pressure dual lance LIMITED WARRANTY 3 year engine CERTIFICATION ● CSA Certified – US and Canada
HDB-3004-0H6G
HDB-3004-0K7G
MODEL NUMBER
3000
3000
PSI
3.9
3.9
GPM
389cc Honda GX390 OHV + Gasoline
9.1 HP Kohler KD440 OHV Diesel
HORSEPOWER/ DISPLACEMENT/ENGINE
General
General
PUMP
1.7 gallons 10.0 gallons
1.3 gallons 10.0 gallons
FUEL TANK CAPACITY
BURNER FUEL TANK CAP.
2.45 gph 343,000
2.45 gph 343,000
BURNER FUEL CONS.
BTU PER HOUR
53.5x28.75x42in.
53.5x28.75x42in.
DIM. (LxWxH)
566 lb.
626 lb.
NET WT.
+ 49 state engine. Not for sale in California.
10
S kid G asoline – B elt D rive – HDC S eries D ealer H ot W ater
TAKE THIS HEAVY-DUTY PRESSURE WASHER TO ANY JOBSITE AND IT WILL HOLD UP TO THE DEMANDS OF THE JOB. THIS BELT DRIVE SKID IS ONE OF THE MOST EFFICIENT AND COST EFFECTIVE PRESSURE WASHERS.
3 D ay S hip
Exclusive Product Dealer 3 D ay S hip
Exclusive Product Dealer
HDC-3505-1H6G
PUMP ● Triplex piston pump ● Factory preset unloader ENGINE ● Electric start – battery not included FRAME ● Powder coated steel skid frame ● Stainless-steel coil wrap COMPONENTS ● Stainless-steel coil wrap heat exchanger with 1 ⁄ 2 -inch schedule 80 pipe coil ● 12V burner – battery not included ● No. 1 or No. 2 diesel or kerosene fired burner (Not approved for bio-fuel)
MISCELLANEOUS ● Temperature rise 150°F/66°C above ambient, maximum 200°F UNIT INCLUDES ● Nozzles – 0°, 15°, 25° and 40° ● 50-foot hose ● Adjustable pressure dual lance LIMITED WARRANTY 3 year engine CERTIFICATION ● CSA Certified – US and Canada
HDC-3005-0V6G*
HDC-3505-1H6G*
HDC-3505-0K6G*^
MODEL NUMBER
3000
3500
3500
PSI
4.8
4.7
4.7
GPM
480cc Vanguard OHV
Honda GX630 OHV 674cc Kohler CH640 OHV
DISPLACEMENT/ENGINE
General
General
General
PUMP
10.0 gallons 10.0 gallons
10.0 gallons 10.0 gallons
10.0 gallons 10.0 gallons
FUEL TANK CAPACITY
BURNER FUEL TANK CAP.
2.76 gph 386,400
2.76 gph 386,400
2.76 gph 386,400
BURNER FUEL CONS.
BTU PER HOUR
50x34x46in.
50x34x46in.
50x34x46in.
DIM. (LxWxH)
NET WT. 725 lb. *49 state fuel tank. All models sold in California are required to have the HX-0287 CARB compliant fuel tank. ^Higher performance 674cc Kohler engine. 725 lb. 725 lb.
Additional models available.
11
S kid G asoline /D iesel – B elt D rive – HVS S eries D ealer H ot W ater
THIS SERIES OFFERS SOME OF THE SAME FEATURES AS THE HDS SERIES AND IS MORE AFFORDABLE. WITH THE SAME HEAVY-DUTY WRAPAROUND FRAME, IT IS JUST AS EFFECTIVE FOR TOUGH CLEANING APPLICATIONS.
3 D ay S hip
Exclusive Product Dealer
HVS-3005-0V6G
PUMP ● Triplex piston pump ● Factory preset unloader ENGINE ● Electric start – battery not included FRAME ● Powder coated steel skid frame COMPONENTS ● Horizontal schedule 80 pipe coil ● 2900-watt generator ● No. 1 or No. 2 diesel or kerosene fired burner (Not approved for bio-fuel)
MISCELLANEOUS ● Temperature rise 150°F/66°C above ambient, maximum 200°F UNIT INCLUDES ● Nozzles – 0°, 15°, 25°, 40° and fixed detergent ● 50-foot hose ● Adjustable pressure dual lance LIMITED WARRANTY 3 year engine CERTIFICATION ● CSA Certified – US and Canada
HVS-3005-0V6G*
HVS-3505-1H6G*
HVS-4005-0B7G
MODEL NUMBER
3000
3500
4000
PSI
4.8
4.7
4.5
GPM
480cc Vanguard OHV Gasoline
Honda GX630 OHV Gasoline
16.8 HP Kubota Z602 OHV Diesel
HORSEPOWER/ DISPLACEMENT/ENGINE
General
General
General
PUMP
10.0 gallons 10.0 gallons
10.0 gallons 10.0 gallons
10.0 gallons 10.0 gallons
FUEL TANK CAPACITY
BURNER FUEL TANK CAP.
3.37 gph 471,800
3.37 gph 471,800
3.37 gph 471,800
BURNER FUEL CONS.
BTU PER HOUR
50x34x46in.
50x34x46in.
56.5x34x46in.
DIM. (LxWxH)
NET WT. 836 lb. *49 state fuel tank. All models sold in California are required to have the HX-0287 CARB compliant fuel tank. 710 lb. 750 lb.
Additional models available.
12
S kid G asoline /D iesel – B elt D rive – HDS S eries D ealer H ot W ater
THIS HOT WATER PRESSURE WASHER IS THE MACHINE PROFESSIONALS GO TO FOR THE HEAVIEST CLEANING APPLICATIONS. IT FEATURES A HEAVY-DUTY FRAME WITH STAINLESS-STEEL PANELS.
3 D ay S hip
Exclusive Product Dealer 3 D ay S hip
Exclusive Product Dealer
HDS-4005-0B7G
PUMP ● Triplex piston pump ● Factory preset unloader ENGINE ● Electric start – battery not included FRAME ● Powder coated steel skid frame ● Stainless-steel coil wrap, control panel and removable front panel COMPONENTS ● Horizontal schedule 80 pipe coil ● 2900-watt generator ● No. 1 or No. 2 diesel or kerosene fired burner (Not approved for bio-fuel) ● Three-way ball valve for inlet selection ● Detergent and steam valves ● Hour meter
MISCELLANEOUS ● Temperature rise 150°F/66°C above ambient, maximum 200°F UNIT INCLUDES ● Nozzles – 0°, 15°, 25°, 40° plus wet steam and fixed detergent ● 50-foot hose ● Adjustable pressure dual lance LIMITED WARRANTY 3 year engine CERTIFICATION ● CSA Certified – US and Canada
HDS-3008-0K6G*
HDS-3505-1H6G*
HDS-4005-0B7G
MODEL NUMBER
3000
3500
4000
PSI
7.8
4.7
4.5
GPM
725cc Kohler CH730 OHV Gasoline
Honda GX630 OHV Gasoline
16.8 HP Kubota Z602 OHV Diesel
HORSEPOWER/ DISPLACEMENT/ENGINE
General
General
General
PUMP
10.0 gallons 10.0 gallons
10.0 gallons 10.0 gallons
10.0 gallons 10.0 gallons
FUEL TANK CAPACITY
BURNER FUEL TANK CAP.
3.67 gph 513,800
3.37 gph 471,800
3.37 gph 471,800
BURNER FUEL CONS.
BTU PER HOUR
50x34x46in.
50x34x46in.
56.5x34x46in.
DIM. (LxWxH)
NET WT. 836 lb. *49 state fuel tank. All models sold in California are required to have the HX-0287 CARB compliant fuel tank. 854 lb. 750 lb.
Additional models available.
13
S tationary O il -F ired – B elt D rive – HEO S eries D ealer H ot W ater
SET UP AS A STATIONARY UNIT WITH REMOVABLE SIDE PANELS, THIS EFFICIENT HOT WATER PRESSURE WASHER IS THE PERFECT SOLUTION IF YOU ARE LOOKING FOR A WASH BAY SYSTEM.
3 D ay S hip
Exclusive Product Dealer
HEO-3004-0E2G shown with fuel tanks option, HX-0218
PUMP ● Triplex piston pump ● Factory preset unloader MOTOR ● Open drip-proof electric motor FRAME ● Powder coated steel frame COMPONENTS ● 1 ⁄ 2 -inch schedule 80 pipe coil with 5-pancake heat exchanger ● 10-inch draft diverter ● On/Off burner, pump and motor switches ● Adjustable thermostat
MISCELLANEOUS ● Temperature rise 150°F/66°C above ambient, maximum 200°F (250°F/121°C outlet temperature with steam option) ● Designed to run on an existing fuel tank (Optional fuel tanks available) UNIT INCLUDES ● Nozzles – 0°, 15°, 25°, 40° and fixed detergent ● 50-foot hose ● Adjustable pressure dual lance LIMITED WARRANTY 1 year electric motor CERTIFICATION ● Intertek Certified – US and Canada
HEO-2004-0E2G
HEO-3004-0E2G
HE0-3005-0E2G
MODEL NUMBER
2000
3000
3000
PSI
4.2
3.9
4.8
GPM
6.0 HP, 230V, 1Ø, 27.1 A 8.0 HP, 230V, 1Ø, 38.6A 10.0 HP, 230V, 1Ø, 45.6A
HORSEPOWER/ MOTOR
General 2.76 gph 386,400
General 2.14 gph 343,000
General 3.06 gph 428,400
PUMP
BURNER FUEL CONS.
BTU PER HOUR
56.5x29x49.75in.
56.5x29x49.75in.
56.5x29x49.75in.
DIM. (LxWxH)
724 lb.
758 lb.
758 lb.
NET WT.
Additional models available.
14
S tationary N atural G as /LP – B elt D rive – HEG S eries D ealer H ot W ater EFFICIENT AND RUGGED, THE HEG SERIES IS ONE OF THE BEST ON THE MARKET IT IS DESIGNED TO CLEAN HEAVILY SOILED VEHICLES AND INDUSTRIAL EQUIPMENT.
3 D ay S hip
Exclusive Product Dealer 3 D ay S hip
Exclusive Product Dealer
HEG-2004-0E2G
PUMP ● Triplex piston pump ● Factory preset unloader MOTOR ● Open drip-proof electric motor FRAME ● Powder coated steel frame COMPONENTS ● 1 ⁄ 2 -inch schedule 80 pipe coil heat exchanger ● Natural gas or LP gas-fired (vapor only) natural draft with aspirating-type burner, 10-inch stack ● 10-inch draft diverter ● 24V control system ● Electronic ignition with standing pilot light
MISCELLANEOUS ● Temperature rise 150°F/66°C above ambient, maximum 200°F (250°F/121°C outlet temperature with steam option) UNIT INCLUDES ● Nozzles – 0°, 15°, 25°, 40° and fixed detergent ● 50-foot hose ● Adjustable pressure dual lance LIMITED WARRANTY 1 year electric motor CERTIFICATION ● Intertek Certified – US and Canada
HEG-1805-0E2G HEG-2004-0E2G HEG-3004-0E2G HEG-3005-0E2G
MODEL NUMBER
1800
2000
3000
3000
PSI
4.7
4.2
3.9
4.8
GPM
6.0 HP, 230V, 1Ø, 25.5A
6.0 HP, 230V, 1Ø, 25.5A
8.0 HP, 230V, 1Ø, 37.0A
10.0 HP, 230V, 1Ø, 44.0A
HORSEPOWER/ MOTOR
General
General 338,000 326,000
General 338,000 326,000
General 338,000 326,000
PUMP
BTU PER HOUR – NAT. GAS 338,000
326,000
BTU PER HOUR – LP GAS
56.5x29x49.75in. 56.5x29x49.75in. 56.5x29x49.75in. 56.5x29x49.75in.
DIM. (LxWxH)
724 lb.
724 lb.
758 lb.
758 lb.
NET WT.
Additional models available.
15
D ealer H ot W ater EVEN THE MOST DEMANDING CLEANING JOBS ARE NO MATCH FOR THE SUPER-EFFICIENT, HIGH VOLUME WASH SERIES. DESIGNED TO TACKLE HEAVY AND SOLID DIRT, OIL AND EVEN THE WORST GRIME. S tationary N atural G as /LP – B elt D rive – HEG HV S eries
3 D ay S hip
HEG-3008-1E3G
Exclusive Product Dealer
MISCELLANEOUS ● Temperature rise 150°F/66°C above ambient, maximum 200°F UNIT INCLUDES ● Nozzles – 0°, 15°, 25°, 40° and fixed detergent ● 50-foot hose ● Adjustable pressure dual lance LIMITED WARRANTY 1 year electric motor CERTIFICATION ● Intertek Certified – US and Canada
PUMP ● Triplex piston pump ● Factory preset unloader MOTOR ● Open drip-proof electric motor FRAME ● Powder coated steel frame COMPONENTS ● 1 ⁄ 2 -inch schedule 80 pipe coil with 8-pancake heat exchanger ( 3 ⁄ 4 -inch on HEG-2010) ● Natural gas or LP gas-fired (vapor only) natural draft with aspirating-type burner, 12-inch stack ● Time delay shutdown ● Electronic ignition with intermittent pilot
HEG-2010-1E3G
HEG-3008-1E3G
MODEL NUMBER
2000
3000
PSI
9.9
7.8
GPM
15.0 HP, 230V, 3Ø, 40.6A
15.0 HP, 230V, 3Ø, 40.6A
HORSEPOWER/MOTOR
General 768,000 730,000
General 650,000 619,500
PUMP
BTU PER HOUR – NAT. GAS
BTU PER HOUR – LP GAS
78.5x34.75x65.75in.
70x34.75x54.5in.
DIM. (LxWxH)
1420 lb.
1057 lb.
NET WT.
Additional models available.
16
P ortable LP – B elt D rive – DHL S eries D ealer H ot W ater
DESIGNED TO DELIVER POWERFUL CLEANING RIGHT WHERE YOU NEED IT, THIS INDUSTRIAL-DUTY, PROPANE-POWERED, HOT WATER PRESSURE WASHER IS A FULLY SELF-CONTAINED CART-MOUNT UNIT.
3 D ay S hip
Exclusive Product Dealer 3 D ay S hip
DH-0703-LP2E1A (tank sold separately)
Exclusive Product Dealer
PUMP ● Triplex crankshaft pump ● Factory preset unloader MOTOR
MISCELLANEOUS ● Temperature rise 150°F/66°C above ambient, maximum 200°F ● Water output temperature is 250°F plus unit operates at 350-PSI in "wet" steam (DH-0703) UNIT INCLUDES ● Nozzles – 0°, 15°, 25°, 40° and detergent ● 50-foot hose ● Insulated lance with trigger gun LIMITED WARRANTY
● Open drip-proof electric motor ● 35-foot power cord with GFCI FRAME ● Powder coated steel frame COMPONENTS ● LP gas-fired (vapor only) natural draft with aspirating-type burner ● High limit temperature control ● LP gas regulator
1 year electric motor CERTIFICATION ● CSA Certified – US and Canada
DH-0703-LP2E1A*
DH-1502-LP2E1A
MODEL NUMBER
700 2.3
1500
PSI
1.8
GPM
1.5 HP, 120V, 1Ø, 13.2A
2.0 HP, 120V, 1Ø, 18.8A
HORSEPOWER/MOTOR
AR
AR
PUMP
200,000
200,000
BTU PER HOUR – LP GAS
57.5x35.5x59.5in.
57.5x35.5x59.5in.
DIM. (LxWxH)
348 lb.
382 lb.
NET WT.
*Combination wet steam cleaner/pressure washer.
17
S tationary A ll -E lectric – B elt D rive – DHA S eries D ealer H ot W ater
THE ALL-ELECTRIC DHA SERIES PRODUCES CONSISTENT ON-DEMAND HOT WATER, PERFECT FOR CLEANING FOOD AND BEVERAGE FACILITIES WHERE THE EMISSIONS OF FUEL AND EXHAUST FUMES ARE PROHIBITED.
DH-3004-AE0E4G
PUMP ● Triplex piston pump ● Factory preset unloader MOTOR ● Enclosed fan-cooled electric motor (DH-2503-AE0E4G) ● Open drip-proof electric motor (DH-3004-AE0E4G) FRAME ● Stainless-steel base and frame HEAT EXCHANGER ● Used for on-demand hot water ● Adjustable thermostat ● Patented design
COMPONENT ● Time delay shutdown UNIT INCLUDES
● Nozzles – 0°, 15°, 25° and 40° ● External downstream detergent injector with detergent nozzle ● 50-foot hose ● Adjustable pressure dual lance LIMITED WARRANTY 1 year electric motor CERTIFICATION ● CSA Certified – US and Canada
● Stainless-steel coils in aluminum casings ● Eliminates constant cleaning and heat loss
DH-2503-AE0E4G
DH-3004-AE0E4G
MODEL NUMBER
2500
3000
PSI
2.8
3.9
GPM
6.0 HP, 460V, 3Ø
8.0 HP, 460V, 3Ø
HORSEPOWER/MOTOR
66.0A
98.0A
UNIT AMPERAGE
General
General
PUMP
48
72
HEATER kW
120°F
130°F
TEMPERATURE RISE
36x25x49in.
36x25x49in.
DIM. (LxWxH)
625 lb.
725 lb.
NET WT.
18
H eat E xchanger D esign D ealer H ot W ater
PATENTED HEAT EXCHANGER DESIGN Mi-T-M Corporation holds the patent for a unique dual coil heat exchanger design which allows each cartridge to heat water twice, keeping the internal heat of the cartridges constant. Heat is transferred into the aluminum casting keeping the heating element from coming into contact with water eliminating calcium and build-up on the coils. ● The DHA Series is designed to eliminate one of the industries most common problems – direct contact of water to the heating element.
● The tubing that carries the water through the heating element is made up of 316 stainless-steel.
● The alternating water flow through each heat exchanger allows for even heat distribution. ● The DHA Series heat exchanger system
eliminates the water/oil bath maintenance and stagnant odor.
● The DHA Series creates a 20% higher temperature rise to competitive designs
and then maintains a constant temperature.
INLET (COLDWATER)
OUTLET (HOT WATER)
19
D ealer H ot W ater A HGM, HOM OR HHM SERIES HEATER MODULE CAN EASILY CONVERT YOUR COLD WATER PRESSURE WASHER INTO A HOT WATER UNIT. SEVERAL BURNER TYPES PROVIDE HOT WATER WHEN IT'S NEEDED. H eater M odules – N atural G as /LP or D iesel /O il -H eated
HGM-3506-0E10 shown with DC-2004-WSE2G and stainless-steel wall mounting bracket option, AW-9501-0000
3 D ay S hip
Exclusive Product Dealer
HGM SERIES FEATURES ● 1 ⁄ 2 -inch schedule 80 vertical coil assembly ● Natural gas or LP gas-fired (vapor only) natural draft with aspirating-type burner, 10 or 12-inch stack ● Draft diverter HOM SERIES FEATURES ● 1 ⁄ 2 -inch schedule 80 vertical coil assembly ● No. 1 or No. 2 fuel oil, diesel or kerosene fired burner (Not approved for bio-fuel) HHM SERIES FEATURES ● Stainless-steel coil wrap ● Horizontal 80 pipe coil heat exchanger
ALL MODELS FEATURE ● Powder coated steel frame ● 12-foot jumper hose CERTIFICATION ● CSA Certified – US and Canada
HGM-3506-0E10 HGM-3508-1E10 H0M-3506-0E10 HHM-3506-1E10
MODEL NUMBER
3500
3500
3500
3500
PSI
6.0
8.0
6.0
6.0
GPM
115V, 1Ø, 2.0A
115V, 1Ø, 2.0A 115V, 1Ø, 3.2A
115V, 1Ø, 3.2A
ELECTRICAL
BURNER FUEL CONS. –
– –
2.76 gph 386,400
2.76 gph 386,400
–
BTU PER HOUR DIESEL BTU PER HOUR – NAT. GAS BTU PER HOUR – LP GAS
338,000
650,000
–
–
326,500
619,500
–
–
24.25x26.25x49.75in. 34.5x34.75x54.5in.
24.25x26.25x49.75in. 56.5x30x41.5in.
DIM. (LxWxH)
346 lb.
707 lb.
330 lb.
423 lb.
NET WT.
20
T railer -M ount P ressure W ashers S ingle and D ual -A xle T railers PAIR THESE ROBUST, CUSTOMIZABLE TRAILERS WITH AN INDUSTRIAL PRESSURE WASHER AND YOU CAN CLEAN DIRT AND GRIME ANYWHERE, ANYTIME. THEY’RE PERFECT FOR CLEANING AT REMOTE SITES.
AW-9000-0003 dual-axle trailer shown with HVS-3505-1H6G hot water pressure washer, hose reels and industrial supply hose, 15-0006 (available as accessories)
FEATURES ● Jack with pad ● 2-inch ball hitch ● Rubber mounted sealed lights ● Powder coated steel frame ● Will fit all Mi-T-M belt- driven pressure washers ● Steel trailer deck plate ● Aluminum treadplate steps for access to water tanks Pressure washers sold separately.
AW-9000-0005 single-axle trailer shown with HVS-3505-1H6G hot water pressure washer, hose reels and industrial supply hose, 15-0006 (available as accessories)
SINGLE-AXLE TRAILERS MODEL NUMBER
AW-9000-0005 (1) 200-gallon
AW-9000-0006 (1) 200-gallon
AW-9000-0007 (1) 200-gallon
WATER TANK
Surge
Electric
None
BRAKES
13.2x6.8x5.6ft.
13.2x6.8x5.6ft.
13.2x6.8x5.6ft.
DIMENSIONS (LxWxH)
3,500 lb.
3,500 lb.
3,500 lb.
GROSS VEHICLE WT.
DUAL-AXLE TRAILERS MODEL NUMBER
AW-9000-0003 (2) 200-gallon
AW-9000-0004 (2) 200-gallon
AW-9000-0008 (1) 200-gallon
WATER TANK(S)
Surge
Electric
Surge None
BRAKES
5ft.x4ft.x12in. 13.2x6.8x5.6ft.
5ft.x4ft.x12in. 13.2x6.8x5.6ft.
STORAGE AREA
13.2x6.8x5.6ft.
DIMENSIONS (LxWxH)
7,000 lb.
7,000 lb.
7,000 lb.
GROSS VEHICLE WT.
As a company we continually strive for advancements in technology, therefore the design of Mi-T-M trailers may change after the publication of this guide.
21
H ot W ater M ini T railers THE COMPACT DESIGN OF THIS TRAILER OFFERS EASE OF TRANSPORT WITHOUT SACRIFICING POWER CLEANING CAPABILITIES. IT’S ENGINEERED WITH A BELT-DRIVEN PRESSURE WASHER AND 12V BECKETT BURNER. G asoline – B elt D rive – T railer -M ount P ressure W ashers
HMT-4004-0MGH
MISCELLANEOUS ● Temperature rise 140°F/60°C above ambient SAFETY FEATURES ● Removable safety flag ● Recommended max. speed is 65 mph ● DOT approved and NATM certified UNIT INCLUDES ● Nozzles – 0°, 15°, 25° and 40° ● 50-foot hose ● Adjustable pressure insulated dual lance with trigger gun LIMITED WARRANTY 3 year engine
PUMP ● Adjustable pressure unloader ● Forged brass manifold ● Thermal relief valve ENGINE ● Remote engine start and choke ● 12V electric start – battery not included FRAME ● Reinforced powder coated steel frame ● Sealed LED trailer lights COMPONENTS ● 1 ⁄ 2 -inch schedule 80-coil with 4-pancake heat exchanger ● 12V Beckett burner ● No. 1 or No. 2 diesel or kerosene fired burner (Not approved for bio-fuel)
HMT-4004-0MGH
HMT-4004-0MGV
MODEL NUMBER
4000
4000
PSI
3.7
3.7
GPM
389cc Honda GX390 OHV +
408cc Vanguard OHV
DISPLACEMENT/ENGINE
General
General
PUMP
(2) 4.80-8 8in. bias ply
(2) 4.80-8 8in. bias ply
TIRES
2in., ball
2in., ball
HITCH
2.875 cubic feet 99x43.5x36in.
2.875 cubic feet 99x43.5x36in.
REAR STORAGE AREA
DIM. (LxWxH)
1,000 lb.
1,000 lb.
GROSS VEHICLE WT.
+ 49 state engine. Not for sale in California.
22
W ater T railer with S emi -T rash P ump
W ater T ransport T railers GREAT FOR DUST CONTROL, PARKING LOT CLEANING AND SIMPLY TRANSPORTING WATER TO REMOTE LOCATIONS, THE DUAL-AXLE WATER TRAILERS FEATURE A LARGE CAPACITY 510-GALLON WATER TANK.
MWT-0510-2MHD shown with hard suction option, TX-0008
PLUMBING ● 1 1 ⁄ 2 -inch fire hose hook-up with 50-foot hose and fog nozzle ● Break-away hydrant fill with 25-foot hose
SEMI-TRASH PUMP ● 2-inch suction and discharge that handles solids up to 3 ⁄ 4 -inch diameter ● Heavy-duty powder coated frame ● Silicone carbide mechanical seals ● Precision molded cast iron impeller and volute for reduced vibration and wear LIMITED WARRANTY 3 year engine
● Dual rear spray heads ● Garden hose connector TRAILER ● DOT approved ● Dual leaf spring suspenion ● Rubber mounted sealed lights ● Wire storage basket
MWT-0510-2MHD shown with hard suction option, TX-0008
MWT-0510-2MHD
MWT-0510-2MMD
MODEL NUMBER
510-gallon
510-gallon
WATER TANK
118cc Honda GX120 OHV
212cc Mi-T-M OHV
DISPLACEMENT/ENGINE
2in. semi-trash
2in. semi-trash
PUMP
(4) ST225-75 15-inch
(4) ST225-75 15-inch
TIRES
2in., ball
2in., ball
HITCH
(2) 3,500 lb. tandem, hydraulic surge brakes
(2) 3,500 lb. tandem, hydraulic surge brakes
AXLES
13.7x6.8x5.8ft.
13.7x6.8x5.8ft.
DIM. (LxWxH)
1,580 lb. 5,900 lb.
1,580 lb. 5,900 lb.
TRAILER WT. (EMPTY)
TRAILER WT. (LOADED)
As a company we continually strive for advancements in technology, therefore the design of Mi-T-M water trailers may change after the publication of this guide.
23
C old W ater – E lectric – D irect D rive C hore M aster ® S eries
TACKLE CLEANING JOBS AROUND YOUR PROPERTY WITH THE COMPACT ELECTRIC CHOREMASTER SERIES PRESSURE WASHER. EASY-TO-USE AND LIGHTWEIGHT. IT'S PERFECT FOR ANY HOMEOWNER.
CM-1400-0MEC
PUMP ● Thermal relief valve ● In-line water strainer ● Built-in low pressure detergent injector ● Oil drain, fill port and sight glass MOTOR ● Enclosed fan-cooled electric motor ● 35-foot power cord with GFCI FRAME ● Powder coated steel frame
UNIT INCLUDES ● Variable high/low pressure nozzle, 0-60° (CM-1400-1MEH) ● Nozzles – 0°, 15°, 25° and 40° (CM-1400-0MEC) ● 25-foot hose ● Insulated trigger gun LIMITED WARRANTY 1 year electric motor CERTIFICATION ● CSA Certified – US and Canada
RESIDENTIAL/COMMERCIAL RESIDENTIAL/COMMERCIAL
USAGE
CM-1400-1MEH
CM-1400-0MEC
MODEL NUMBER
Hand carry
Cart-mount
TYPE
1400
1400
PSI
1.5
1.5
GPM
1.5 HP, 120V, 1Ø, 13.5A
1.5 HP, 120V, 1Ø, 13.5A
HORSEPOWER/MOTOR
Triplex crankshaft Adjustable pressure Two-piece, 36in.
Triplex crankshaft Adjustable pressure Two-piece, 36in.
PUMP
UNLOADER
LANCE
14x11x10in.
26x18x38in.
DIM. (LxWxH)
45 lb.
54 lb.
NET WT.
24
C old W ater – G asoline – D irect D rive – V ertical C hore M aster ® S eries
THIS PORTABLE SERIES IS AN EXCELLENT CHOICE FOR ALL-PURPOSE CLEANING AROUND A HOME, SHOP OR PROPERTY. USE IT TO CLEAN DECKS, DRIVEWAYS, SIDING AND VEHICLES.
CV-2600-4MMC
PUMP ● Aluminum manifold ● Thermal relief valve ● In-line water strainer ● Built-in low pressure detergent injector FRAME ● Removable powder coated steel handle
UNIT INCLUDES ● Nozzles – 15°, 25° and detergent nozzle ● Detergent tank (Not available on CV-2600-3MMC) ● 30-foot hose ● Insulated trigger gun LIMITED WARRANTIES 1 year Mi-T-M engine Honda engine: 3 month, commercial / 2 year, residential
● Welded frame reinforcement ● 12-inch semi-pneumatic tires
RESIDENTIAL RESIDENTIAL RESIDENTIAL RESIDENTIAL CV-2600-3MMC CV-2600-4MHC CV-2600-4MMC CV-3000-4MHC
USAGE
MODEL NUMBER
2600
2600
2600
3000
PSI
2.2
2.2
2.2
2.2
GPM
170cc Mi-T-M OHV 160cc Honda GCV160 OHV
170cc Mi-T-M OHV 203cc Honda GCV200 OHV
DISPLACEMENT/ ENGINE
AR, axial
AR, axial
AR, axial
AR, axial
PUMP
Preset pressure Two-piece, 36in. 26.7x18.6x39.3in.
Preset pressure Two-piece, 36in. 26.7x18.6x39.3in.
Preset pressure Two-piece, 36in. 26.7x18.6x39.3in.
Preset pressure Two-piece, 36in. 26.7x18.6x39.3in.
UNLOADER
LANCE
DIM. (LxWxH)
61 lb.
61 lb.
61 lb.
61 lb.
NET WT.
25
C old W ater – G asoline – D irect D rive – H orizontal C hore M aster ® S eries CLEAN DIRT AND GRIME FROM HOME EXTERIORS, OUTDOOR EQUIPMENT AND JUST ABOUT ANY SURFACE WITH THE HANDY CHOREMASTER HORIZONTAL SERIES.
CM-3000-4MMC
PUMP ● Equipped with Mi-T-M PRS ● Forged brass manifold
UNIT INCLUDES ● Nozzles – 15°, 25° and detergent nozzle ● Detergent tank ● 30-foot hose ● Insulated trigger gun LIMITED WARRANTIES
● Thermal relief valve ● In-line water strainer ● Built-in low pressure detergent injector FRAME ● Removable powder coated steel handle
1 year Kohler engine 3 year Mi-T-M engine
● Welded frame reinforcement ● 12-inch semi-pneumatic tires
RESIDENTIAL/COMMERCIAL
RESIDENTIAL/COMMERCIAL
USAGE
CM-3000-4MKC
CM-3000-4MMC
MODEL NUMBER
3000
3000
PSI
2.3
2.3
GPM
196cc Kohler SH265 OHV
212cc Mi-T-M OHV
DISPLACEMENT/ ENGINE
Mi-T-M, axial Preset pressure Two-piece, 36in. 26.7x18.6x39.3in.
Mi-T-M, axial Preset pressure Two-piece, 36in. 26.7x18.6x39.3in.
PUMP
UNLOADER
LANCE
DIM. (LxWxH)
74 lb.
74 lb.
NET WT.
26
C old W ater – G asoline – D irect D rive C hore M aster ® S eries
THE MULTIPURPOSE CHOREMASTER SERIES IS GREAT FOR KEEPING PATIOS, SIDING AND EQUIPMENT CLEAN. USE ITS BUILT-IN DETERGENT INJECTOR WITH A Mi-T-M CLEANER TO EFFECTIVELY REMOVE MOLD, MILDEW AND DIRT.
CM-3200-0MMB
PUMP ● Equipped with Mi-T-M PRS
UNIT INCLUDES ● Nozzles – 15°, 25° and detergent nozzle ● 25-foot hose (50-foot on CM-3600 and CM-4200 models) ● Insulated trigger gun LIMITED WARRANTY 3 year engine
● Thermal relief valve ● In-line water strainer ● Built-in low pressure detergent injector FRAME ● Powder coated steel frame ● 10-inch flat-free tires
RESIDENTIAL/ COMMERCIAL COMMERCIAL COMMERCIAL COMMERCIAL CM-3000-0MMB CM-3200-0MMB CM-3600-0MMB CM-4200-0MMB
USAGE
MODEL NUMBER
3000
3200
3600
4200
PSI
2.4
2.4
2.8
3.4
GPM
212cc Mi-T-M OHV 212cc Mi-T-M OHV 300cc Mi-T-M OHV 420cc Mi-T-M OHV
DISPLACEMENT/ ENGINE
Mi-T-M, axial Fixed pressure
Mi-T-M, crankshaft
AR, crankshaft
AR, crankshaft
PUMP
Adjustable pressure
Adjustable pressure
Adjustable pressure
UNLOADER
Two-piece, 36in. 37x21x24.5in.
Two-piece, 36in. 37x21x24.5in.
Two-piece, 36in. 40x22.5x24.5in.
Two-piece, 36in. 40x22.5x24.5in.
LANCE
DIM. (LxWxH)
75 lb.
85 lb.
130 lb.
142 lb.
NET WT.
27
C old W ater – G asoline – D irect D rive W ork P ro ® S eries
DESIGNED TO EASILY HANDLE TOUGH CLEANING JOBS, THE WORK PRO SERIES IS GREAT FOR BLASTING AWAY MUD AND MUCK AND IS GREAT FOR CLEANING JOBS ON THE FARM OR SMALL BUSINESS.
WP-3200-0MHB
PUMP ● Equipped with Mi-T-M PRS ● Brass manifold
UNIT INCLUDES ● Nozzles – 15°, 25° and detergent nozzle ● 25-foot hose (50-foot on WP-3600
● Thermal relief valve ● In-line water strainer ● Built-in low pressure detergent injector FRAME ● Powder coated steel frame ● 10-inch flat-free tires
and WP-4200 models) ● Insulated trigger gun LIMITED WARRANTIES Engine CERTIFICATION Intertek Certified to UL-1776 – US (WP-3000 models)
RESIDENTIAL/ COMMERCIAL COMMERCIAL COMMERCIAL COMMERCIAL
USAGE
WP-3000-1MHB WP-3000-0MKB
WP-3200-0MHB WP-3200-0MKB
WP-3600-0MHB WP-3600-0MKB
WP-4200-0MHB WP-4200-0MKB
MODEL NUMBER
3000
3200
3600
4200
PSI
2.4
2.4
2.8
3.4
GPM
163cc Honda GX160 OHV 196cc Kohler SH265 OHV Mi-T-M, axial Fixed pressure
196cc Honda GX200 OHV 208cc Kohler CH270 OHV
270cc Honda GX270 OHV + 277cc Kohler CH395 OHV AR, crankshaft
389cc Honda GX390 OHV + 429cc Kohler CH440 OHV AR, crankshaft
DISPLACEMENT/ ENGINE
Mi-T-M, crankshaft
PUMP
Adjustable pressure
Adjustable pressure
Adjustable pressure
UNLOADER
Two-piece, 36in. 37x21x24.5in.
Two-piece, 36in. 37x21x24.5in.
Two-piece, 36in. 40x22.5x24.5in.
Two-piece, 36in. 40x22.5x24.5in.
LANCE
DIM. (LxWxH)
75 lb.
85 lb.
130 lb.
142 lb.
NET WT.
+ 49 state engine. Not for sale in California.
28
THIS POWERFUL ELECTRIC PRESSURE WASHER SERIES IS IDEAL FOR REMOVING DIRT, MUD, MOLD AND MILDEW FROM ALMOST ANY SURFACE. CONTRACTORS LOVE IT BECAUSE IT'S EASY TO MOVE FROM JOB TO JOB. A luminum S eries – E lectric – P ortable /S tationary – D irect D rive D ealer C old W ater
3 D ay S hip
DC-2503-A0E2G
Exclusive Product Dealer 3 D ay S hip
Exclusive Product Dealer
PUMP ● Triplex piston pump ● Adjustable pressure trapping unloader ● External bypass MOTOR ● Low speed 1750RPM FRAME ● Aluminum frame ● 13-inch tires (10-inch on DC-1502-A0E1G) (Portable models)
UNIT INCLUDES ● Nozzles – 0°, 15°, 25° and 40° ● External downstream detergent injector with detergent nozzle ● 50-foot hose (25-foot hose on DC-1502 models) ● Insulated trigger gun LIMITED WARRANTY 1 year electric motor
DC-1502-A0E1G DC-1502-A0E1G-W*
DC-2503-A0E2G DC-2503-A0E2G-W*
DC-3004-A0E2G DC-3004-A0E2G-W*
MODEL NUMBER
1500
2500
3000
PSI
2.0
3.2
3.9
GPM
2.0 HP, 120V, 1Ø, 18.8A 6.0 HP, 230V, 1Ø, 24.1A 8.0 HP, 230V, 1Ø, 34.5A
HORSEPOWER/MOTOR
General
General
General
PUMP
36in.
36in.
36in.
LANCE
42.9x20.5x24.7in. / 24.5x10.8x12.2in.
46.4x23.8x24.6in. / 29.1x13.5x17.8in.
46.4x23.8x24.6in. / 30.6x13.7x18.9in.
DIM. (LxWxH)
87 lb. / 73 lb.
162 lb. / 142 lb.
194 lb. / 175 lb.
NET WT.
*Stationary model designed for wall mount applications.
Additional models available.
29
A luminum S eries – G asoline – P ortable – D irect D rive D ealer C old W ater THIS PRESSURE WASHER IS AN EXCELLENT CHOICE FOR CLEANING CONTRACTORS ON THE MOVE. NOT ONLY IS IT LIGHTWEIGHT, IT'S POWERFUL ENOUGH TO REMOVE OLD PAINT AND TOUGH STAINS.
3 D ay S hip
DC-4004-A0H6A
Exclusive Product Dealer
PUMP ● Triplex piston pump ● Adjustable pressure trapping unloader ● External bypass FRAME ● Aluminum frame ● Patented vibration isolation plate ● 13-inch tires (10-inch on DC-2703 and DC-3003 models)
UNIT INCLUDES ● Nozzles – 0°, 15°, 25° and 40° ● External downstream detergent injector with detergent nozzle ● 50-foot hose ● Insulated trigger gun LIMITED WARRANTY 3 year engine CERTIFICATION Intertek Certified to UL-1776 – US (Honda engine models)
DC-2703-A0H6G DC-2703-A0M6M
DC-3003-A0H6G DC-3003-A0M6A
DC-3504-A0H6G DC-3504-A0M6A
DC-4004-A0H6G DC-4004-A0M6A
MODEL NUMBER
2700
3000
3500
4000
PSI
2.4
3.0
4.0 / 3.5
4.0 / 3.5
GPM
196cc Honda GX200 OHV 212cc Mi-T-M OHV
270cc Honda GX270 OHV + 300cc Mi-T-M OHV
389cc Honda GX390 OHV + 420cc Mi-T-M OHV
389cc Honda GX390 OHV + 420cc Mi-T-M OHV
DISPLACEMENT/ ENGINE
General / Mi-T-M General / AR
General / AR
General / AR
PUMP
36in.
36in.
48in.
48in.
LANCE
39x20.5x24.5in.
42.5x23.5x25in. 111 lb. / 99 lb.
42.5x23.5x25in.
42.5x23.5x25in. 128 lb. / 118 lb.
DIM. (LxWxH)
82 lb. / 74 lb.
125 lb.
NET WT.
+ 49 state engine. Not for sale in California.
Additional models available.
30